620-33300 Hurricane Dry Style Tailpipes Built To Your Custom Dimensions - 4-1/2" Polished, Pair
Additional Information:
Note: This is a custom product, and will be priced by quotation in advance of placing your order. You will be quoted the actual cost of your tailpipes after we receive your custom dimensions.
|
|
620-33400 Hurricane Dry Style Tailpipes Built To Your Custom Dimensions - 5" Polished, Pair
Additional Information:
Note: This is a custom product, and will be priced by quotation in advance of placing your order. You will be quoted the actual cost of your tailpipes after we receive your custom dimensions. Orders placed via the web site at $0.00 will be ignored.
|
|
620-921013
- Lessens stress put on mounting bracket.
- Prevents damage to your mounting bracket.
- Stops the hatch ram from over-contracting.
- Only to be used on 620-921018 and 620-921024.
ID: 1 1/4”
OD: 5/8”
|
|
137-9301 Hydraulic Hose -6
These are the best choice for flexible hose in custom installations. We sell these hydraulic hoses in bulk lengths so you can cut it to the exact lengths needed for your boat. Then install reusable hose ends with appropriate mandrels. These hoses are used for high pressure runs, and have a black rubber covering with wire braid reinforcement inside.
Priced and sold per foot.
|
|
135-1050 External Hydraulic Stainless Steel Dual Cylinder Steering Line Kit
This kit is standard equipment with Hardin Marine hydraulic steering systems But if your boat was originally equipped with rubber lines, this is the ultimate upgrade and really finishes off a professional installation. 16" Long Hoses, -6 Fittings.
|
|
135-1051 External Hydraulic Stainless Steel Single Cylinder Steering Line Kit
This kit is standard equipment with Hardin Marine hydraulic steering systems But if your boat was originally equipped with rubber lines, this is the ultimate upgrade and really finishes off a professional installation. 16" Long Hoses, -6 Fittings.
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> Hydraulic Stainless Steel Trim Hose Assemblies with 90 / 90 Degree Ends
These are made from 100% 316 stainless steel fittings and high performance rubber hose for the hydraulic trim pumps used on trim tabs, outdrives and hatch rams. Available in lengths from 1 to 50 feet. Fitting size is -3 inverted flare 3/8"-24 thread. Priced each. These hoses are made to order and are non returnable!
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> Hydraulic Trim Hose Assemblies with Straight / 90 Degree Ends
These are 100% 316 stainless steel fittings and high performance rubber hoses for the hydraulic trim pumps used on trim tabs, outdrives and hatch rams. Available in lengths from 1 to 50 feet. Fitting size is -3 inverted flare 3/8"-24 thread. Priced each. These hoses are made to order and are non returnable.
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> Hydraulic Trim Hose Assemblies with Straight / Straight Degree Ends
These are 100% 316 stainless steel fittings and high performance rubber hoses for the hydraulic trim pumps used on trim tabs, outdrives and hatch rams. Available in lengths from 1 to 50 feet. Fitting size is -3 inverted flare 3/8"-24 thread. Priced each.
|
|
625-4189 Impeller Rebuild Service Kit - For Gen 4 and Gen 5/6 Rev. 2 Hardin Stainless Pumps - Mercury Replacement
This impeller kit is a rebuild service kit for the Hardin Marine stainless impeller housing 625-4178 and stainless pumps 625-4110 and 625-4118 . This kit comes with new wear plates , O-rings, and impeller. Rev. 2 Version for pumps manufactured from 01/2013
Which Rebuild kit do I need?
Rev. 1 pumps have a 1/8" drain plug in the rear housing and a slotted front wear plate.
Rev. 2 pumps have no drain plug and a solid front wear plate.
Mercury
This impeller kit is a rebuild service kit for the Hardin Marine stainless impeller housing 625-4178 .
Kit includes:
- (1)Impeller
- (2) Wear Plate
- O-rings
|
|
620-38127 Add an inlet with a drain provison with this fitting. Fits 3/4" NPT port. 1" Hose barb. See related parts for drain plug sold separately. GLM 13991, Mercruiser 22-862210A01.
|
|
620-673 Inlet Gasket (With Screen), 6-71 & 8-71
Supercharger gaskets are used in assembly and installation of a supercharger,
as well as the GMC supercharger style cases. These gaskets are now sold as
single gaskets.
|
|
420-910315-99 Inlet Tee, Gil/Hardin Manifold, Non-Standard
Replacement fitting. 1-1/8" Hose x 1" Hose x 1/2" NPT. 1-1/8" Hose angles up slightly.
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> Mayfair Basic Inside Hydraulic Add-On Kit for Dual Rams
This kit includes:
This kit is designed for the boats that already have an external steering add-on system and want to have a full power hydraulic system. Kit includes all hoses, fittings, char-lynn helm kit, inline oil filter and the necessary fasteners.
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> Mayfair Basic Inside Hydraulic Add-On Kit for Single Rams
This kit includes:
This kit is designed for the boats that already have an external steering add-on system and want to have a full power hydraulic system. Kit includes all hoses, fittings, char-lynn helm kit, inline oil filter and the necessary fasteners.
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> Mayfair Deluxe Inside Hydraulic Steering Kit - Dual Bravo or Single Bravo With Dual Rams
This kit includes:
The Mayfair by Hardin Marine full power steering system is supplied with all the highest quality components that are available today. This system will allow you to go from a Mercury add-on system to a full hydraulic power steering system. This will eliminate any back feed to the steering wheel that comes from a cable assisted steering system. Mayfair by Hardin Marine is now offering these full power steering systems for the new Mercury XR ITS system, and the #6 SSM Speedmaster, and Bravo. Included in the kit is a hydraulic helm control unit, option of no helm column or 4", 6" or 8" extreme billet steering column, remote reservoir, high pressure oil filter assembly, four special o-ring helm fittings, the new billet power steering pump cap, -6 high pressure hydraulic hose, hose ends, and complete instructions.
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> Mayfair Deluxe Inside Hydraulic Steering Kit -Dual #6 SSM Speedmasters Kit
This kit includes:
The Mayfair by Hardin Marine full power
steering system is supplied with all the highest quality components that
are available today. This system will allow you to go from a
Mercury add-on system to a full hydraulic power steering system.
This will eliminate any back feed to the steering wheel that comes from
a cable assisted steering system. Mayfair by Hardin Marine is now
offering these full power steering systems for the new Mercury XR ITS
system, and the #6 SSM Speedmaster, and Bravo. Included in the kit
is a hydraulic helm control unit, option of no helm column or 4", 6" or 8" billet steering column, remote
reservoir, high pressure oil filter assembly, four special o-ring helm
fittings, the new billet power steering pump cap, -6 high pressure
hydraulic hose, hose ends, and complete instructions.
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> Mayfair Deluxe Inside Hydraulic Steering Kit -Dual XR With ITS Steering Kit
This kit includes:
The Mayfair by Hardin Marine full power steering system is supplied with all the highest quality components that are available today. This system will allow you to go from a Mercury add-on system to a full hydraulic power steering system.This will eliminate any back feed to the steering wheel that comes from a cable assisted steering system. Mayfair by Hardin Marine is now offering these full power steering systems for the new Mercury XR ITS system, and the #6 SSM Speedmaster, and Bravo. Included in the kit is a hydraulic helm control unit, option of no helm column or 4", 6" or 8" billet steering column, remote reservoir, high pressure oil filter assembly, four special o-ring helm fittings, the new billet power steering pump cap, -6 high pressure hydraulic hose, hose ends, and complete instructions.
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> Mayfair Deluxe Inside Hydraulic Steering Kit -Single Bravo, Single Ram
This kit includes:
The Mayfair by Hardin Marine full power steering system is supplied with all the highest quality components that are available today. This system will allow you to go from a Mercury add-on system to a full hydraulic power steering system. This will eliminate any back feed to the steering wheel that comes from a cable assisted steering system. Mayfair by Hardin Marine is now offering these full power steering systems for the new Mercury XR ITS system, and the #6 SSM Speedmaster, and Bravo. Included in the kit is a hydraulic helm control unit, option of no helm column or 4", 6" or 8" extreme billet steering column, remote reservoir, high pressure oil filter assembly, four special o-ring helm fittings, the new billet power steering pump cap, -6 high pressure hydraulic hose, hose ends, and complete instructions.
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> Mayfair Deluxe Inside Hydraulic Steering Kit -Single XR With ITS Steering Kit
This kit includes:
The Mayfair by Hardin Marine full power steering system is supplied with all the highest quality components that are available today. This system will allow you to go from aMercury add-on system to a full hydraulic power steering system.This will eliminate any back feed to the steering wheel that comes from a cable assisted steering system. Mayfair by Hardin Marine is now offering these full power steering systems for the new Mercury XR ITS system, and the #6 SSM Speedmaster, and Bravo. Included in the kit is a hydraulic helm control unit, option of no helm column or 4", 6" or 8" extreme billet steering column, remote reservoir, high pressure oil filter assembly, four special o-ring helm fittings, the new billet power steering pump cap, -6 high pressure hydraulic hose, hose ends, and complete instructions.
|
|
950-758600 Interchangeable Driver Shaft (fits all 4 drivers 950-758200 thru 950-758500
This new jet pump seal & bushing driver simplifies the installation process
of critical bowl bushings and various seals in the jet pump. The stainless
driver shaft is threaded and interchangeable with all the drivers.
|
|
625-4620
- Stop Debris and Sand from clogging your intercooler.
- Manufactured from hard anodized 6061-T6 billet aluminum.
- Clear see though body fitted with a self centering base.
- Durable all stainless steel micron filter element to keep sand and small particles out.
- Housing offers two 1/8" NPT pressure ports for pressure gauge or warning sender.
- Entire unit can be serviced in less than a minute with Single function o-ring sealed mounting knob
- Bulkhead style Remote mounting bracket.
- Dual check ball style bypasses maintain flow if reservoir becomes full.
- Dual 3/4" NPT Outlets.
- Top to Bottom Length: 11-1/8"
- 4-1/16" Width
- 1" NPT Inlet
|
|
625-4621
- Stop Debris and Sand from clogging your intercooler.
- Manufactured from hard anodized 6061-T6 billet aluminum.
- Clear see though body fitted with a self centering base.
- Durable all stainless steel micron filter element to keep sand and small particles out.
- Housing offers two 1/8" NPT pressure ports for pressure gauge or warning sender.
- Entire unit can be serviced in less than a minute with Single function o-ring sealed mounting knob
- BBC Cylinder Head, Vertical mounting bracket.
- Dual check ball style bypasses maintain flow if reservoir becomes full.
- Dual 3/4" NPT Outlets.
- Top to Bottom Length: 11-1/8"
- 4-1/16" Width
- 1" NPT Inlet
|
|
625-4626
- Stop Debris and Sand from clogging your intercooler.
- Manufactured from hard anodized 6061-T6 billet aluminum.
- Clear see though body fitted with a self centering base.
- Durable all stainless steel micron filter element to keep sand and small particles out.
- Housing offers two 1/8" NPT pressure ports for pressure gauge or warning sender.
- Entire unit can be serviced in less than a minute with Single function o-ring sealed mounting knob
- Bulkhead style Remote mounting bracket.
- Check ball style bypass maintains flow if reservoir becomes full.
- Single 1" NPT Outlet.
- Top to Bottom Length: 11-1/8"
- 4-1/16" Width
|
|
625-4627
- Stop Debris and Sand from clogging your 1100 / 1350 / 1650 intercooler.
- Manufactured from hard anodized 6061-T6 billet aluminum.
- Includes Bracket that mount behind engine and above the transmission.
- Includes fittings and hardware needed to install.
- Clear see though body fitted with a self centering base.
- Durable all stainless steel micron filter element to keep sand and small particles out.
- Housing offers two 1/8" NPT pressure ports for pressure gauge or warning sender.
- Entire unit can be serviced in less than a minute with Single function o-ring sealed mounting knob
- BBC Cylinder Head, Vertical mounting bracket.
- Dual check ball style bypasses maintain flow if reservoir becomes full.
- Dual 3/4" NPT Outlets.
|
|
128-10001 Intercooler Seal Kit
Supercharger gaskets are used in assembly and installation of a supercharger,
as well as the GMC supercharger style cases. Installation screws and o-rings included. Fits Superchiller and KE intercoolers only.
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> Now is the time to re-cable your jet boat at an affordable price! This complete cable kit includes Rack or Rotary Cable Steering System, 3300C throttle cable, 4300BC Shift cables (or 4300C / 3300C for different pumps), helm, rack and dash bezel. Available in common lengths only. Click here for how to measure for replacement steering cable. Throttle and shift cables are measured end to end.
|
|
