421-11-2045 "O" Ring Bearing Carrier)"O" Ring Bearing Carrier)
|
|
421-11-2240 "O" Ring (Bearing Carrier)"O" Ring (Bearing Carrier)
|
|
421-11-2111 "O" Ring"O" Ring (Bulkhead Fitting)
|
|
421-11-2019 "O" Ring"O" Ring (Oil Passage)
|
|
421-11-2119 "O" Ring "O" Ring (U-Joint Assembly)
2 per Upper Gear Assemble (Sold Each)
|
|
421-11-2012 "O" Ring "O" Ring (Valve Assembly)
2 per Gimbal Helmet Assembly
|
|
421-01-3265 17 Spline SC vertical shaft for SCX upper.
|
|
421-01-8055 1 1/2" SCX Drive Spacer
Qty |
Description |
1 |
Spacer 1 1/2" |
1 |
SCX Coupler +1 1/2" |
1 |
SCX Alignment Spacer |
6 |
7/16-14 x 4" S/S Stud Heat Treated
|
2 |
7/16-14 x3 1/2" S/S Stud Heat Treated
|
8 |
7/16-20 Nylock Nuts S/S |
8 |
7/16" AN Washers |
1 |
"O" Ring (Water Passage) |
1 |
"O" Ring (PTFE Oil Passage) |
1 |
"O" Ring (Cooling Water) |
1 |
"O" Ring (Alignment spacer) |
1 |
Tube Loctite 271
|
These are designed for SCX lowers and SC lowers with SCX down shafts will not work with standard mercury size down shafts.
|
|
421-01-8010 1 7/16" Prop Shaft, Bearing Carrier, and Prop Adaptor Kit
|
SCX, SCX 4, SCT, SCXT |
|
|
1 7/16" Prop Shaft, Bearing Carrier, Prop Adaptor Kit |
|
Kit Includes |
|
QTY |
Description |
P/N |
1 |
1 7/16" Prop Shaft |
01-3571 |
1 |
Bearing Carrier |
01-2398 |
1 |
Bearing Cup (Bearing Carrier) |
10-2035 |
1 |
Bearing Cone (Bearing Carrier) |
10-1035 |
1 |
Shim Kit |
01-2011 |
2 |
Seals |
11-3037 |
1 |
Prop Adaptor |
01-3569 |
1 |
Thrust Washer |
01-6579 |
1 |
Washer (3/4" Spring) |
08-221300001 |
1 |
Nut 3/4-16 |
08-081306003 |
1 |
Drain Screw |
01-2504 |
1 |
Drain Screw Washer |
11-1017 |
|
|
421-01-8022 1 7/16"Prop Shaft & Bearing Carrier Kit
1 7/16"Prop Shaft & Bearing Carrier Kit, used on IMCO SC Lowers
Kit Includes
1 |
1 1 7/16" Prop Shaft |
01-3570 |
1 |
Black Bearing Carrier |
01-2575 |
1 |
Bearing Cup |
10-2018 |
1 |
Bearing Cone |
10-1017 |
1 |
Shim Kit |
01-2011 |
2 |
Seals |
11-3034 |
1 |
Thrust Washer |
01-6579 |
1 |
Washer (3/4" Spring) |
08-221300001 |
1 |
Nut 3/4-16 |
08-081306003 |
1 |
Drain Screw |
01-2504 |
1 |
Drain Screw Washer |
11-1017 |
1 |
Prop Adaptor |
01-3569 |
|
|
421-01-3266 17 Spline SC vertical shaft for SCX upper
|
|
421-01-8052 1" SCX Drive Spacer
Qty |
Description |
1 |
Spacer 1" |
1 |
SCX Coupler +1" |
1 |
SCX Alignment Spacer |
6 |
7/16-14 x 3 1/2" S/S Stud Heat Treated
|
2 |
7/16-14 x3" S/S Stud Heat Treated
|
8 |
7/16-20 Nylock Nuts S/S |
8 |
7/16" AN Washers |
1 |
"O" Ring (Water Passage) |
1 |
"O" Ring (PTFE Oil Passage) |
1 |
"O" Ring (Cooling Water) |
1 |
"O" Ring (Alignment spacer) |
1 |
Tube Loctite 271
|
These are designed for SCX lowers and SC lowers with SCX down shafts will not work with standard mercury size down shafts.
|
|
421-01-8054 1" SCX4 Drive Spacer
Qty |
Description |
1 |
Spacer 1" |
1 |
SCX/SCX4 Coupler + 1" |
1 |
SCX/SCX4 Alignment Spacer |
6 |
7/16-20/14 x 3" S/S Stud |
2 |
7/16-20/14 x3 1/8" S/S Stud |
8 |
7/16-20 Nylock Nuts S/S |
8 |
7/16 AN Washers |
1 |
"O" Ring (Cooling Water Passage) |
1 |
"O" Ring (Oil Passage) |
1 |
"O" Ring (Water Passage) |
1 |
"O" Ring (Alignment spacer) |
1 |
Loctite |
These are designed for SCX lowers and SC lowers with SCX down shafts will not work with standard mercury size down shafts.
|
|
421-01-8016 Gold Bearing Carrier Kit 1" Prop Shaft & Gold Bearing Carrier Kit, for SC and Mercury Lowers
Kit Includes
1 |
1" Prop Shaft |
01-3009 |
1 |
Gold Bearing Carrier |
01-2130 |
1 |
Bearing Cup |
10-2014 |
1 |
Bearing Cone |
10-1013 |
1 |
Shim Kit |
01-2011 |
1 |
Seal |
11-3035 |
1 |
Seal (Line Cutter) |
11-3032 |
1 |
Drain Screw |
01-2504 |
1 |
Drain Screw Washer |
11-1017 |
|
|
421-TB-2 1.25" Tie Bar material per Inch for Imco Tie Bars.
NOTE: This is not a Tie Bar. If you need additional length added to the base 18" length of an applicable Imco Tie Bar, add 1 quantity for every inch extra you need. For example, you need a 32" tie bar, you need to add 14 quantity of this part to your order along with your choice of Imco Tie Bar model.
|
|
421-TB-3 1.375” Dia Tie Bar Material Polished 304 SS Per Inch
NOTE: This is not a Tie Bar. If you need additional length added to the base 18" length of an applicable Imco Tie Bar, add 1 quantity for every inch extra you need. For example, you need a 32" tie bar, you need to add 14 quantity of this part to your order along with your choice of Imco Tie Bar model.
|
|
421-TB-1 1.750" Tie Bar material per Inch
NOTE: This is not a Tie Bar. If you need additional length added to the base 18" length of an applicable Imco Tie Bar, add 1 quantity for every inch extra you need. For example, you need a 32" tie bar, you need to add 14 quantity of this part to your order along with your choice of Imco Tie Bar model.
|
|
421-01-8046 1/2" SCX Drive Spacer
Qty |
Description |
1 |
Spacer 1/2" |
1 |
SCX Coupler +1/2" |
1 |
SCX Alignment Spacer |
6 |
7/16-14 x 3" S/S Stud Heat Treated
|
2 |
7/16-14 x2 1/2" S/S Stud Heat Treated
|
8 |
7/16-20 Nylock Nuts S/S |
8 |
7/16" AN Washers |
1 |
"O" Ring (Water Passage) |
1 |
"O" Ring (PTFE Oil Passage) |
1 |
"O" Ring (Cooling Water) |
1 |
"O" Ring (Alignment spacer) |
1 |
Tube Loctite 271
|
These are designed for SCX lowers and SC lowers with SCX down shafts will not work with standard mercury size down shafts.
|
|
421-01-8048 1/2" SCX4 Drive Spacer
Qty |
Description |
1 |
Spacer 1/2" |
1 |
SCX/SCX4 Coupler + 1/2" |
1 |
SCX/SCX4 Alignment Spacer |
6 |
7/16-20/14 x 2 1/2" S/S Stud |
2 |
7/16-20/14 x2 5/8" S/S Stud |
8 |
7/16-20 Nylock Nuts S/S |
8 |
7/16 AN Washers |
1 |
"O" Ring (Cooling Water Passage) |
1 |
"O" Ring (Oil Passage) |
1 |
"O" Ring (Water Passage) |
1 |
"O" Ring (Alignment spacer) |
1 |
Loctite |
These are designed for SCX lowers and SC lowers with SCX down shafts will not work with standard mercury size down shafts.
|
|
421-11-4026 1/2" Sealing Cord1/2" Sealing Cord
|
|