421-04-6075 Transom Mount Water Pickup3/4" npt fitting cut to length pickup. This transom mounted pickup can be cut to fit various location. Attaches with 3 screws (not included).
|
|
421-05-6434 3/4" x 2" Clevis Pin 3/4" x 2" Clevis Pin
4 per Gimbal Steering and Trim Assembly
|
|
421-08-091306001 3/4" Nylock Nut3/4-16 Thin Nylock Nut
|
|
421-08-020806061 Flat Head Allen3/8-16 x 3/4" Flat Head Allen S/S
|
|
421-SF-20 3-port Superflow Fuel Selector Valve
This electric fuel valve has high capacity flow, 250 gallons per hour and a 400 pound maximum operating pressure Designed with a brass ball valve construction and a 1/2" thru-hole for non restricted flow This valve has an automatic "switch-over" switch built-in for fuel tanks sending unit The mechanical switch makes it easy in case of electrical failure This unit measures 2" deep x 4" tall x 12-3/4" long with 1/2" NPT This is also available as a 6 port with fuel returns perfect for fuel injected motors.
|
|
421-02-6433 Gatlin Muffler tips that will except external flaps4 1/2" X 10" Long Gatlin Muffler tips that will accept 4" external flaps, 4" hose. External flaps are sold separately or mufflers can be purchased as a kit (02-8175) that includes flaps. 6" Flange, 3 bolt pattern. (Sold in Pairs)
|
|
421-02-8175 Gatlin Muffler tips with external flaps4 1/2" X 10" Long Gatlin Muffler tips with 4" external flaps, 4" hose. 6" Flange 3 bolt pattern. (Sold in Pairs)
|
|
421-02-6442 4 1/2" x 8" or 12" Gatlin Slip In Mufflers (SOLD EACH). These mufflers can be used with any exhaust system that has 4 1/2" OD Stainless Pipe with 8" of open area to except the muffler.
|
|
421-05-2317 -4 Hose Extension -4 Hose Extension
2 per Gimbal Housing Assembly
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> Sea Strainer 4 Port ABCDSea Strainer 4 Port ABCD
IMCO's sea strainer are the strongest available on the market. Our stainless steel cans are investment cast for strength. Our brackets are unique in design. Machined out of 386 aluminum and polished. The mounting bracket bolts together with 2 stainless steel allen bolts, capturing the can, o-ring seal, and the 3/4" plexi-glass top in one clean and simple operation without stress on the glass. Our perforated screen works as grater to reduce debris into fine particles. IMCO's strainer are 6 1/4" in diameter, 5" deep, and can be order in any depth for offshore use. All strainers are made to order. This 4 port strainer can be ordered with 1 1/4" hose barbs, 1" NPT female fittings, 3/4" NPT female fittings, -16 male fittings or any combination of fittings.
|
|
421-02-8405 4" diameter Polished 304 stainless steel all- purpose tip.
4" diameter Polished 304 stainless steel all- purpose tip. Designed for extreme transom angles, this tip comes with our 02-8287 flange and gasket, to stretch uniformly around the 15" long tube as pictured. This tip is hose connected internally for easy installation. Must be installed above the water line. Can be special ordered with a 45-degree cut. Without internal flap. (SOLD EACH)
IMCO offers a wide variety of polished, stainless steel exhaust tips. Mounting hardware not included. Custom tips are also available.
|
|
421-02-8406 4" All Purpose Exhaust Tip with Internal Flap
4" Diameter Polished 304 stainless steel all- purpose tip. Designed for extreme transom angles, this tip comes with our 02-8287 flange and gasket, to stretch uniformly around the 15" long tube as pictured. This tip is hose connected internally for easy installation. Must be installed above the water line. Can be special ordered with a 45-degree cut. WITH internal flap installed. (SOLD EACH)
IMCO offers a wide variety of polished, stainless steel exhaust tips. Mounting hardware not included. Custom tips are also available.
|
|
421-02-8101 Aluminum S-Pipe Kit Universal (pair)
These S-pipes are used to lower your exhaust exit location 12" They are 4" in diameter and enable you to lower exhaust exits to clear swim steps, steering, etc... They simply install with hose and clamps.
These S-Pipes extend 13-1/4" from inlet to outlet with a 12" drop.
SOLD AS ONE PAIR.
Kit Includes
- (2) "S" pipes
- (8) 4" Stainless Steel Hose Clamps
- (2) 4" Hose Couplers
|
|
421-02-6366 4" Angle Cut Tips
To view and download the PDF Tip Drawing CLICK HERE
4" Diameter Polished 304 Stainless steel tip measure 10 1/2" long with 5 1/2" external, and 5" internal. NO internal flap. (SOLD IN PAIRS)
Mufflers can be used with this tip. P/N 02-6472
|
|
421-02-8151 4" Angle Cut Tips with Internal Flaps
To view and download the PDF Tip Drawing CLICK HERE
4" diameter Polished 304 Stainless steel tip measure 10 1/2" long with 5 1/2" external, and 5" internal. WITH internal flap installed. (SOLD IN PAIRS)
Mufflers can be used with this tip. P/N 02-6472
|
|
421-02-8169 4" Clamp On Dual Stage Muffler6" X 10" long designed to push on 4" exhaust outlet. True performance stainless steel through transom mufflers that silences motors up to 500 horsepower without sacrificing power. It works so well that we have a patent on the design. Our internal silencing chambers, plus integral flapper help to eliminate engine backwash, while reducing the decibel levels through out the entire RPM range. Use the 4" clamp on version with your existing tips. 02-2464 replacement flaps are also available.(SOLD IN PAIRS)
|
|
421-02-6360 4" Extra Long Angle Cut Tips
To view and download the PDF Tip Drawing CLICK HERE
4" Diameter Polished 304 Stainless steel tip measure 15 1/2" long with 10 1/2" external, and 5" internal. NO internal flap. (SOLD IN PAIRS)
Mufflers can be used with this tip. P/N 02-6479 or P/N 02-6472
|
|
421-02-8145 4" Extra Long Angle Cut Tips with Internal Flaps
To view and download the PDF Tip Drawing CLICK HERE
4" diameter Polished 304 Stainless steel tip measure 15 1/2" long with 10 1/2" external, and 5" internal. With internal flap installed. (SOLD IN PAIRS)
Mufflers can be used with this tip. P/N 02-6479 or P/N 02-6472
|
|
421-02-6340 4" Extra Long Straight Cut Exhaust Tips
To view and download the PDF Tip Drawing CLICK HERE
4" Diameter 304 stainless steel Exhaust tips measure 15 1/2" long with 10 1/2" external, and 5" internal. Designed to except 02-6479 mufflers. NO flap installed. (SOLD IN PAIRS)
IMCO offers a wide variety of polished, stainless steel exhaust tips. All 90- degree tips are available with internal, and external flaps to prevent engine backwash. Mounting hardware not included. Custom tips are also available.
|
|
421-02-8137 4" Extra Long Straight Cut Exhaust Tips with Internal Flaps
To view and download the PDF Tip Drawing CLICK HERE
4" diameter 304 stainless steel Exhaust tips measure 15 1/2" long with 10 1/2" external, and 5" internal. Designed to except 02-6479 mufflers.with Internal flap installed. (SOLD IN PAIRS)
IMCO offers a wide variety of polished, stainless steel exhaust tips. All 90- degree tips are available with internal, and external flaps to prevent engine backwash. Mounting hardware not included. Custom tips are also available.
|
|
