IMCO Marine

Clevis Bushing A .145” Thick, B 1.720” OD, C .570” Long, D .875” ID, E 1.387” OD

Clevis Bushing A .147” Thick, B 1.453” OD, C .533” Long, D .750” ID, E 1.133” OD, H/T 1.085

Clevis Bushing A .198” Thick, B 1.944” OD, C .650” Long, D 1.00” ID, E 1.505” OD

Clevis Bushing A .214” Thick, B 1.453” OD, C .533” Long, D .750” ID, E 1.133” OD, H/T 0.940

Clevis Bushing A .215” Thick, B 2.450” OD, C .850” Long, D 1.25” ID, E 1.875” OD

Clevis Pin A .750” OD, B 1/2”- 20 Thread, C 2.000” Shoulder, D 2.870” OAL, 304 SS

Clevis Pin A .750” OD, B 1/2”- 20 Thread, C 2.050” Shoulder, D 3.200” OAL, 304 SS

Clevis Pin A .750” OD, B 1/2”- 20 Thread, C 4.040” Shoulder, D 5.190” OAL, 304 SS

Clevis Pin A .875” OD, B 5/8”-18 Thread, C 2.600” Shoulder, D 4.360” OAL, 304 SS

Clevis Stud Assembly .750” Bushing & Stud Dia x 4.000” OAL Polished 304 SS

Clevis Stud Assembly 1.00” Bushing & Stud Dia x 5.375” OAL Polished 304 SS

Clevis Stud Assembly 1.00” Bushing & Stud Dia x 8.125” OAL Polished 304 SS

Clevis Stud Assembly 1.25” Bushing & Stud Dia x 6.625” OAL Polished 304 SS

Clutch Shaft Retainer (Thrust Collar)

Clutch Spring

2 per Upper Gear Assembly

This item does not ship UPS, Please Call To Order.

Features:

All gimbal parts are constructed from A-356 aluminum, and heat treated to T6 full hardness.

IMCO gimbal housing has a thicker casting than stock and features a removable bearing carrier pack for easy maintenance. The lower swivel fork is 40% stronger, than standard. The removable nameplate on top allows for quick access to the upper swivel shaft nut without removing the housing from the transom.

This item does not ship UPS, Please Call To Order.

Features:

All gimbal parts are constructed from A-356 aluminum, and heat treated to T6 full hardness.

IMCO gimbal housing has a thicker casting than stock and features a removable bearing carrier pack for easy maintenance. The lower swivel fork is 40% stronger, than standard. The removable nameplate on top allows for quick access to the upper swivel shaft nut without removing the housing from the transom.

IMCO Extreme Advantage HP Gimbal with Outside Steering Kit

Now you can eliminate the weak link in your drive train and run without the worry of mechanical failure. The HP Gimbal Housing gives your drive the strength it needs. Check these IMCO, HP Gimbal super features:

• The HP Gimbal Housing uses a thicker than stock casting.
• The HP helmets have been beefed up in all critical areas including the pin locations that are normally prone to failure.
• The HP Gimbal lower swivel pin is 40% stronger than original.
• The HP Gimbal has a removable bearing pack for easy maintenance.
• The HP Gimbal nameplate can be simply unscrewed for access to the upper swivel shaft nut, without removing the housing from the transom.