421-05-8061 Trim Actuator for Mercury Rams with Aluminum Brackets
This actuator for Mercury Drive Trim Rams has unique anodized Aluminum brackets for a clean and great looking installation.
Kit Includes:
- (2) Mercury Indicator Clamp
- (1) Indicator Tube
- (1) Indicator Cable Nut
- (1) Indicator Ram
- (1) Indicator Spring
- (1) Spring Clip
- (1) Tempory Spring Retainer
- (1) Ram Stop
- (4) 10-24 x 5/8" Socket Cap Screw
- (2) 10-24 x 3/16" Socket Set Screw
|
|
421-05-8060 IMCO Trim Indicator S/S
To view and download the PDF instruction sheet CLICK HERE IMCO Trim Indicator S/S This kit is for IMCO trim rams as shown. (Indicator only, does not include trim ram).
Kit Includes
| 2 |
Indicator Clamp |
05-6007 |
| 1 |
Indicator Tube |
05-6008 |
| 1 |
Indicator Cable Nut |
05-6009 |
| 1 |
Indicator Ram |
05-2038 |
| 1 |
Indicator Spring |
05-6006 |
| 1 |
Spring Clip |
05-6010 |
| 1 |
Tempory Spring Retainer |
05-9001 |
| 1 |
Ram Stop |
05-6018 |
| 4 |
10-24 x 5/8" Socket Cap Screw |
08-060403051 |
| 2 |
10-24 x 3/16" Socket Set Screw |
08-050403021 |
|
|
421-05-8035 Trim Pump
Trim Pump
Billet aluminum oil canister polished and clear anodized with clear acrylic cylinder for easy oil level check.
Easy fill billet aluminum cap.
Stainless steel mounting bracket polished with solenoids mounted and wired.
Dash 4 jic fittings for oil hose hook up.
|
|
421-05-6028 Trim Ram (Port)Trim Ram (Port)
|
|
421-05-6029 Trim Ram (Starboard)
Trim Ram (Starboard)
|
|
421-PT-13 Twin Engine, Twin Power Steering Pump Priority Valve
Connects 2 engines / 2 power steering pumps (high pressure / return). Has -6 AN brass connections. Hard anodized billet body.
|
|
421-06-2092 Ultrasonic Tank Sending UnitIndustry standard SAE stud mounting pattern. Supports 10-180, 240-33 and 0-5 volt gauge outputs. Works with Gas, Diesel, Water and Chemical Toilet (Must be programmed to the specific tank) unit programming is completed by IMCO.
|
|
421-01-2555 Upper Cap (SCX, SCX4, SCXT, SCX4T)
Upper Cap, shown with top cap lid and mounting screw, not included.
|
|
421-09-2006 Upper Cooling Hose
Hose connects mid section to upper cap.
|
|
421-01-3599 Upper Gear Shaft
Upgraded Upper Gear Shaft, this shaft is more forgiving thanthe stock harden shafts to allow less twist and breaks. Makesa great upgrade to any Bravo / XR / XZ drives.
|
|
421-05-3343 Upper Swivel PinUpper Swivel Pin
|
|
421-05-2024 Valve AssemblyValve Assembly (Anodized aluminum with steel pin)
|
|
421-04-1260 Valve Cover Breather
To view and download the PDF drawing CLICK HERE Polished angled mounting flange valve cover breather. Used on 04-1240. (SOLD EACH)
|
|
421-04-1265 Valve Cover Breather
To view and download the PDF drawing CLICK HERE Polished 90-degree mounting flange valve cover breather. Used on 04-1255. (SOLD EACH)
|
|
421-04-1270 Breather
To view and download the PDF drawing CLICK HERE
Valve Cover Puke Tank Breather
1 5/16-12 UN Thread, fits -16 male union with O-ring or 1" NPT (SOLD EACH)
|
|
421-01-3258 Vertical Shaft 3” Shorter
|
|
421-01-2400 Vertical Shaft Bearing Sleeve
|
|
|
|
|
421-01-2140 Vertical Shaft Coupler-17 tooth spline
|
|
421-01-3567 Vertical Shaft SCX,SCXT (Lower)
|
|
