IMCO Marine

Adapter -8 JIC Swivel 90° 316 SS

Adapter -8 JIC Swivel T 316 SS

Adapter 9/16” O-Ring to -6 JIC ZP Steel

Adjustable Engine Mount Kit - Black

Easier and stronger, IMCO's new complete motor mounting system is fully adjustable (height and width) for 25" to 30" stringers. Compact size allows easy access to hoses, oil coolers, water pumps, wiring and other hardware. All parts are pre-fabricated and ready to mount. Adjustable hardware is all stainless steel. Block mounts and stringer mounts are 356 aluminum heat treated to T6 hardness for maximum strength. Sold as Pair. Fits V8 BBC and SBC Engines only. Stringer bracket will need to be drilled to fit your application. No mounting hardware included.

Adjustable Engine Mount Kit - Polished

Easier and stronger, IMCO's new complete motor mounting system is fully adjustable (height and width) for 25" to 30" stringers. Compact size allows easy access to hoses, oil coolers, water pumps, wiring and other hardware. All parts are pre-fabricated and ready to mount. Adjustable hardware is all stainless steel. Block mounts and stringer mounts are 356 aluminum heat treated to T6 hardness for maximum strength. Sold in Pairs. Fits V8 BBC and SBC Engines only.

Alignment Spacer (SCX, SCX4, SCXT, SCX4T)

Alignment Spacer - Fits IMCO SC Drives Only

Dual Ram Power Steering for Dual Alpha Applications 9" Narrow Mount

The IMCO Standard Dual Ram Power Steering System is intended for Dual Alpha powered recreational performance sport boats. The system consists of through-transom hydraulic port bracketry with all necessary hose, fittings, fasteners, aluminum drive end caps and stainless braided line Once installed, boat drivers will experience significantly more precise steering control, especially at higher speeds. This kit has a narrower mount for applications with limited horizontal clearance.

Do it yourself. Install a dual ram steering system in approximately six hours or less.

Note: These kits contain non-assembled rubber hoses and brass fittings. See steering component section for stainless steel braided line options.

Requires Installation Kit:

421-HK-11, Brazilian manifold style, 1994 and later.
421-HK-9, Saginaw fitting style, 1994 and earlier.

For parts list, and to buy replacement parts click here

Dual Ram Power Steering for Alpha Applications 10.5" Standard Mount

The IMCO Dual Single Ram Power Steering System is intended for Alpha powered recreational performance sport boats. The system consists of through-transom hydraulic port bracketry with all necessary hose, fittings, fasteners, aluminum drive end caps and stainless braided line Once installed, boat drivers will experience significantly more precise steering control, especially at higher speeds.

Do it yourself. Install a dual ram steering system in approximately five hours or less.

Note: These kits contain non-assembled rubber hoses and brass fittings. See steering component section for stainless steel braided line options.

Requires Installation Kit:

421-HK-11, Brazilian manifold style, 1994 and later.
421-HK-9, Saginaw fitting style, 1994 and earlier.

For parts list, and to buy replacement parts click here

28" – 38” Alpha Tie Bar

IMCO's stainless steel Tie Bars improve the handling characteristics and are necessary for external steering. Tie bars add stability and keeps drives in unison. Unlike other manufactures, our bars are machined with an "Eye Bolt" on one end, and a Threaded Eye Bolt and Jam Nut at the other for strength and durability. Available for Mercruiser Alpha I, Alpha II and Bravo outdrives. All tie bars are highly polished.

For proper length when ordering please measure Prop shaft to Prop shaft centerline.

28" – 38” Alpha 2 Tie Bars with 5/8" x 11 1/4" stainless replacement shaft, and nuts

IMCO's stainless steel Tie Bars improve the handling characteristics and are necessary for external steering. Tie bars add stability and keeps drives in unison. Unlike other manufactures, our bars are machined with an "Eye Bolt" on one end, and a Threaded Eye Bolt and Jam Nut at the other for strength and durability. Available for Mercruiser Alpha I, Alpha II and Bravo outdrives. All tie bars are highly polished.

For proper length when ordering please measure Prop shaft to Prop shaft centerline.

Alpha One Generation 1 Drive Designed for easy installation on Alpha Generation 1 drives. DOES NOT FIT GEN II DRIVES! Stainless steel caps reduce oil and bearing temperatures to promote maximum drive durability and longevity. This unique design disburses water over the top cap along with the sides of the case where the majority of heat dissipation takes place. Kits come complete with all the necessary mounting hardware and installation instructions.

Standard Single Ram Power Steering for Alpha Applications 10.5" Standard Mount

The IMCO Standard Single Ram Power Steering System is intended for Alpha powered recreational performance sport boats. The system consists of through-transom hydraulic port bracketry with all necessary hose, fittings, fasteners, aluminum drive end caps and stainless braided line Once installed, boat drivers will experience significantly more precise steering control, especially at higher speeds.

Do it yourself. Install a single ram steering system in approximately four hours or less.

Note: These kits contain non-assembled rubber hoses and brass fittings. See steering component section for stainless steel braided line options.

Requires Installation Kit:

421-HK-11, Brazilian manifold style, 1994 and later.
421-HK-9, Saginaw fitting style, 1994 and earlier.

For parts list, and to buy replacement parts click here

Alternator/Power Steering Bracket

Power steering pump and alternator relocation bracket designed for Bravo applications to allow for clearance of aftermarket Manifolds. The bracket allows for the use of all std V-belts and power steering hoses. Its black coated heavy duty steel construction assures trouble free operation. Can also be used for most Big Block Chevy application.

Aluminum "T" Tank 10" x 30" 10 Gallon with Brackets
IMCO fuel tanks are custom made to order and take approximately 1-2 weeks to complete.
To order a custom configuration please download the PDF order form.
To view and download the PDF order form CLICK HERE

LIMITED WARRANTY FOR MARINE FUEL TANKS
The fuel tank covered by this warranty was produced by IMCO (Inman Marine Corporation), and it is warranted against defects in materials and workmanship for one year from the date of its first consumer sale, whether by IMCO or by any other marine products dealer or seller.

LIMITATIONS: This warranty is expressly conditioned upon the tank having been properly installed and under proper usage for which the tank was intended. The terms of this warranty shall not apply to any case where any unauthorized repair or work has been done upon the tank.

IMCO fuel tanks are designed strictly for pleasure craft purposes only. Any tanks used in crafts other than for pleasure purposes will not be covered in any way under this written warranty as set forth herein, and IMCO in no way will be liable or responsible for any damages. It is expressly provided that IMCO shall not be responsible for consequential inconvenience, injury, or damages; and that no warranty, expressed or implied, other than this written warranty is made or authorized by IMCO. Notwithstanding the foregoing, some states do not allow certain limitations, or exclusions may not apply when the laws of such states are controlling. Furthermore, this warranty gives the buyer specific legal rights, and the buyer may also have additional rights which vary from state to state.

WARRANTER PROMISES: In the event that the fuel tank, to which this warranty applies, fails to comply with the terms of the warranty set forth above, IMCO agrees to either replace or repair any part or parts which are defective in materials or workmanship, or IMCO agrees to refund an amount not in excess of the factory purchase price of said part or parts. The decision as to which of the foregoing remedies is allowed shall be made in the sole discretion of IMCO upon the following principles: IMCO will in all cases elect to either repair or replace such a part or parts unless
a) IMCO is unable to provide a replacement and/or repair is not commercially practical or cannot be timely made, or
b) IMCO and the consumer mutually agree upon a refund as set forth above, except as provided hereafter with respect to certain allowable cost incident to replacement or repair, and with respect to the remedy for a defective sender. The foregoing shall be the exclusive remedy offered by IMCO under this warranty. The sending unit has a one year limited warranty. IMCO will replace any defective senders within this time frame at no charge. However, IMCO will not pay for or be liable for any labor costs incurred.

PROCEDURE FOR CLAIMS: Claims under this warranty must be made directly to IMCO,
Inman Marine Corporation - ATTN: Warranty Claims Dept.
510 East Arrow Highway, San Dimas, CA 91773
Telephone No.: (909) 592-6162

PROCEDURE (A): A consumer may write or call directly to IMCO in order to describe the nature of the claim, or
PROCEDURE (B): A consumer may present his/her claim to the dealer from which he/she purchased the IMCO product (or to any other IMCO dealer). In order for a claim, made in this manner, to be recognized by IMCO, the dealer must make an inspection of the work necessary to remedy the defect. He/she then must write or phone IMCO with a report of the inspection. When a claim has come to the attention of IMCO in either manner as set forth above, the consumer or dealer must give the date the tank was manufactured and the date the boat was purchased. IMCO will at this point determine whether the claim is covered by the warranty as set forth herein, and IMCO reserves the exclusive right to make this determination. If the claim is covered by warranty and the consumer has followed procedure (A) above, IMCO will instruct the consumer either to send the defective merchandise to IMCO, freight collect, or to deliver the defective product to a specific authorized IMCO dealer, who shall be informed of the work which IMCO will perform under the warranty, or to pursue such other reasonable course of action at the expense of IMCO, which IMCO in its sole discretion shall deem most practical in satisfying its obligations hereunder.
PROCEDURE (C): If the consumer desires, the following additional claims procedure is available, but the burden of all costs incurred pursuant thereto, prior to approval of the claim by IMCO, must be borne by the consumer, who is subject to possible limited reimbursement as set forth hereafter. Under this procedure, the consumer must return the defective product directly to IMCO freight prepaid. If upon receipt of the defective product, IMCO approves the warranty claim, IMCO will replace or repair the product and return it to the consumer freight prepaid, along with the reimbursement of the initial freight cost incurred by the consumer.

NOTE: Under all three of the claims procedures set forth above, IMCO will not pay for, or reimburse the cost of, repair work or other labor (including labor with respect to tank removal) unless prior authorization for such service has been granted by IMCO. Under the limitations of this warranty set by IMCO, IMCO fuel tanks cannot be tampered with or repaired by any source other than IMCO. If so, under no conditions, will IMCO honor the warranty.

Aluminum "T" Tank 8" x 18" 4 Gallon with Brackets
IMCO fuel tanks are custom made to order and take approximately 1-2 weeks to complete.
To order a custom configuration please download the PDF order form.
To view and download the PDF order form CLICK HERE

LIMITED WARRANTY FOR MARINE FUEL TANKS
The fuel tank covered by this warranty was produced by IMCO (Inman Marine Corporation), and it is warranted against defects in materials and workmanship for one year from the date of its first consumer sale, whether by IMCO or by any other marine products dealer or seller.

LIMITATIONS: This warranty is expressly conditioned upon the tank having been properly installed and under proper usage for which the tank was intended. The terms of this warranty shall not apply to any case where any unauthorized repair or work has been done upon the tank.

IMCO fuel tanks are designed strictly for pleasure craft purposes only. Any tanks used in crafts other than for pleasure purposes will not be covered in any way under this written warranty as set forth herein, and IMCO in no way will be liable or responsible for any damages. It is expressly provided that IMCO shall not be responsible for consequential inconvenience, injury, or damages; and that no warranty, expressed or implied, other than this written warranty is made or authorized by IMCO. Notwithstanding the foregoing, some states do not allow certain limitations, or exclusions may not apply when the laws of such states are controlling. Furthermore, this warranty gives the buyer specific legal rights, and the buyer may also have additional rights which vary from state to state.

WARRANTER PROMISES: In the event that the fuel tank, to which this warranty applies, fails to comply with the terms of the warranty set forth above, IMCO agrees to either replace or repair any part or parts which are defective in materials or workmanship, or IMCO agrees to refund an amount not in excess of the factory purchase price of said part or parts. The decision as to which of the foregoing remedies is allowed shall be made in the sole discretion of IMCO upon the following principles: IMCO will in all cases elect to either repair or replace such a part or parts unless
a) IMCO is unable to provide a replacement and/or repair is not commercially practical or cannot be timely made, or
b) IMCO and the consumer mutually agree upon a refund as set forth above, except as provided hereafter with respect to certain allowable cost incident to replacement or repair, and with respect to the remedy for a defective sender. The foregoing shall be the exclusive remedy offered by IMCO under this warranty. The sending unit has a one year limited warranty. IMCO will replace any defective senders within this time frame at no charge. However, IMCO will not pay for or be liable for any labor costs incurred.

PROCEDURE FOR CLAIMS: Claims under this warranty must be made directly to IMCO,
Inman Marine Corporation - ATTN: Warranty Claims Dept.
510 East Arrow Highway, San Dimas, CA 91773
Telephone No.: (909) 592-6162

PROCEDURE (A): A consumer may write or call directly to IMCO in order to describe the nature of the claim, or
PROCEDURE (B): A consumer may present his/her claim to the dealer from which he/she purchased the IMCO product (or to any other IMCO dealer). In order for a claim, made in this manner, to be recognized by IMCO, the dealer must make an inspection of the work necessary to remedy the defect. He/she then must write or phone IMCO with a report of the inspection. When a claim has come to the attention of IMCO in either manner as set forth above, the consumer or dealer must give the date the tank was manufactured and the date the boat was purchased. IMCO will at this point determine whether the claim is covered by the warranty as set forth herein, and IMCO reserves the exclusive right to make this determination. If the claim is covered by warranty and the consumer has followed procedure (A) above, IMCO will instruct the consumer either to send the defective merchandise to IMCO, freight collect, or to deliver the defective product to a specific authorized IMCO dealer, who shall be informed of the work which IMCO will perform under the warranty, or to pursue such other reasonable course of action at the expense of IMCO, which IMCO in its sole discretion shall deem most practical in satisfying its obligations hereunder.
PROCEDURE (C): If the consumer desires, the following additional claims procedure is available, but the burden of all costs incurred pursuant thereto, prior to approval of the claim by IMCO, must be borne by the consumer, who is subject to possible limited reimbursement as set forth hereafter. Under this procedure, the consumer must return the defective product directly to IMCO freight prepaid. If upon receipt of the defective product, IMCO approves the warranty claim, IMCO will replace or repair the product and return it to the consumer freight prepaid, along with the reimbursement of the initial freight cost incurred by the consumer.

NOTE: Under all three of the claims procedures set forth above, IMCO will not pay for, or reimburse the cost of, repair work or other labor (including labor with respect to tank removal) unless prior authorization for such service has been granted by IMCO. Under the limitations of this warranty set by IMCO, IMCO fuel tanks cannot be tampered with or repaired by any source other than IMCO. If so, under no conditions, will IMCO honor the warranty.

Aluminum "T" Tank 8" x 24" 5 Gallon with Brackets
IMCO fuel tanks are custom made to order and take approximately 1-2 weeks to complete.
To order a custom configuration please download the PDF order form.
To view and download the PDF order form CLICK HERE

LIMITED WARRANTY FOR MARINE FUEL TANKS
The fuel tank covered by this warranty was produced by IMCO (Inman Marine Corporation), and it is warranted against defects in materials and workmanship for one year from the date of its first consumer sale, whether by IMCO or by any other marine products dealer or seller.

LIMITATIONS: This warranty is expressly conditioned upon the tank having been properly installed and under proper usage for which the tank was intended. The terms of this warranty shall not apply to any case where any unauthorized repair or work has been done upon the tank.

IMCO fuel tanks are designed strictly for pleasure craft purposes only. Any tanks used in crafts other than for pleasure purposes will not be covered in any way under this written warranty as set forth herein, and IMCO in no way will be liable or responsible for any damages. It is expressly provided that IMCO shall not be responsible for consequential inconvenience, injury, or damages; and that no warranty, expressed or implied, other than this written warranty is made or authorized by IMCO. Notwithstanding the foregoing, some states do not allow certain limitations, or exclusions may not apply when the laws of such states are controlling. Furthermore, this warranty gives the buyer specific legal rights, and the buyer may also have additional rights which vary from state to state.

WARRANTER PROMISES: In the event that the fuel tank, to which this warranty applies, fails to comply with the terms of the warranty set forth above, IMCO agrees to either replace or repair any part or parts which are defective in materials or workmanship, or IMCO agrees to refund an amount not in excess of the factory purchase price of said part or parts. The decision as to which of the foregoing remedies is allowed shall be made in the sole discretion of IMCO upon the following principles: IMCO will in all cases elect to either repair or replace such a part or parts unless
a) IMCO is unable to provide a replacement and/or repair is not commercially practical or cannot be timely made, or
b) IMCO and the consumer mutually agree upon a refund as set forth above, except as provided hereafter with respect to certain allowable cost incident to replacement or repair, and with respect to the remedy for a defective sender. The foregoing shall be the exclusive remedy offered by IMCO under this warranty. The sending unit has a one year limited warranty. IMCO will replace any defective senders within this time frame at no charge. However, IMCO will not pay for or be liable for any labor costs incurred.

PROCEDURE FOR CLAIMS: Claims under this warranty must be made directly to IMCO,
Inman Marine Corporation - ATTN: Warranty Claims Dept.
510 East Arrow Highway, San Dimas, CA 91773
Telephone No.: (909) 592-6162

PROCEDURE (A): A consumer may write or call directly to IMCO in order to describe the nature of the claim, or
PROCEDURE (B): A consumer may present his/her claim to the dealer from which he/she purchased the IMCO product (or to any other IMCO dealer). In order for a claim, made in this manner, to be recognized by IMCO, the dealer must make an inspection of the work necessary to remedy the defect. He/she then must write or phone IMCO with a report of the inspection. When a claim has come to the attention of IMCO in either manner as set forth above, the consumer or dealer must give the date the tank was manufactured and the date the boat was purchased. IMCO will at this point determine whether the claim is covered by the warranty as set forth herein, and IMCO reserves the exclusive right to make this determination. If the claim is covered by warranty and the consumer has followed procedure (A) above, IMCO will instruct the consumer either to send the defective merchandise to IMCO, freight collect, or to deliver the defective product to a specific authorized IMCO dealer, who shall be informed of the work which IMCO will perform under the warranty, or to pursue such other reasonable course of action at the expense of IMCO, which IMCO in its sole discretion shall deem most practical in satisfying its obligations hereunder.
PROCEDURE (C): If the consumer desires, the following additional claims procedure is available, but the burden of all costs incurred pursuant thereto, prior to approval of the claim by IMCO, must be borne by the consumer, who is subject to possible limited reimbursement as set forth hereafter. Under this procedure, the consumer must return the defective product directly to IMCO freight prepaid. If upon receipt of the defective product, IMCO approves the warranty claim, IMCO will replace or repair the product and return it to the consumer freight prepaid, along with the reimbursement of the initial freight cost incurred by the consumer.

NOTE: Under all three of the claims procedures set forth above, IMCO will not pay for, or reimburse the cost of, repair work or other labor (including labor with respect to tank removal) unless prior authorization for such service has been granted by IMCO. Under the limitations of this warranty set by IMCO, IMCO fuel tanks cannot be tampered with or repaired by any source other than IMCO. If so, under no conditions, will IMCO honor the warranty.

Aluminum "T" Tank 8" x 30" 6 Gallon with Brackets
IMCO fuel tanks are custom made to order and take approximately 1-2 weeks to complete.
To order a custom configuration please download the PDF order form.
To view and download the PDF order form CLICK HERE

LIMITED WARRANTY FOR MARINE FUEL TANKS
The fuel tank covered by this warranty was produced by IMCO (Inman Marine Corporation), and it is warranted against defects in materials and workmanship for one year from the date of its first consumer sale, whether by IMCO or by any other marine products dealer or seller.

LIMITATIONS: This warranty is expressly conditioned upon the tank having been properly installed and under proper usage for which the tank was intended. The terms of this warranty shall not apply to any case where any unauthorized repair or work has been done upon the tank.

IMCO fuel tanks are designed strictly for pleasure craft purposes only. Any tanks used in crafts other than for pleasure purposes will not be covered in any way under this written warranty as set forth herein, and IMCO in no way will be liable or responsible for any damages. It is expressly provided that IMCO shall not be responsible for consequential inconvenience, injury, or damages; and that no warranty, expressed or implied, other than this written warranty is made or authorized by IMCO. Notwithstanding the foregoing, some states do not allow certain limitations, or exclusions may not apply when the laws of such states are controlling. Furthermore, this warranty gives the buyer specific legal rights, and the buyer may also have additional rights which vary from state to state.

WARRANTER PROMISES: In the event that the fuel tank, to which this warranty applies, fails to comply with the terms of the warranty set forth above, IMCO agrees to either replace or repair any part or parts which are defective in materials or workmanship, or IMCO agrees to refund an amount not in excess of the factory purchase price of said part or parts. The decision as to which of the foregoing remedies is allowed shall be made in the sole discretion of IMCO upon the following principles: IMCO will in all cases elect to either repair or replace such a part or parts unless
a) IMCO is unable to provide a replacement and/or repair is not commercially practical or cannot be timely made, or
b) IMCO and the consumer mutually agree upon a refund as set forth above, except as provided hereafter with respect to certain allowable cost incident to replacement or repair, and with respect to the remedy for a defective sender. The foregoing shall be the exclusive remedy offered by IMCO under this warranty. The sending unit has a one year limited warranty. IMCO will replace any defective senders within this time frame at no charge. However, IMCO will not pay for or be liable for any labor costs incurred.

PROCEDURE FOR CLAIMS: Claims under this warranty must be made directly to IMCO,
Inman Marine Corporation - ATTN: Warranty Claims Dept.
510 East Arrow Highway, San Dimas, CA 91773
Telephone No.: (909) 592-6162

PROCEDURE (A): A consumer may write or call directly to IMCO in order to describe the nature of the claim, or
PROCEDURE (B): A consumer may present his/her claim to the dealer from which he/she purchased the IMCO product (or to any other IMCO dealer). In order for a claim, made in this manner, to be recognized by IMCO, the dealer must make an inspection of the work necessary to remedy the defect. He/she then must write or phone IMCO with a report of the inspection. When a claim has come to the attention of IMCO in either manner as set forth above, the consumer or dealer must give the date the tank was manufactured and the date the boat was purchased. IMCO will at this point determine whether the claim is covered by the warranty as set forth herein, and IMCO reserves the exclusive right to make this determination. If the claim is covered by warranty and the consumer has followed procedure (A) above, IMCO will instruct the consumer either to send the defective merchandise to IMCO, freight collect, or to deliver the defective product to a specific authorized IMCO dealer, who shall be informed of the work which IMCO will perform under the warranty, or to pursue such other reasonable course of action at the expense of IMCO, which IMCO in its sole discretion shall deem most practical in satisfying its obligations hereunder.
PROCEDURE (C): If the consumer desires, the following additional claims procedure is available, but the burden of all costs incurred pursuant thereto, prior to approval of the claim by IMCO, must be borne by the consumer, who is subject to possible limited reimbursement as set forth hereafter. Under this procedure, the consumer must return the defective product directly to IMCO freight prepaid. If upon receipt of the defective product, IMCO approves the warranty claim, IMCO will replace or repair the product and return it to the consumer freight prepaid, along with the reimbursement of the initial freight cost incurred by the consumer.

NOTE: Under all three of the claims procedures set forth above, IMCO will not pay for, or reimburse the cost of, repair work or other labor (including labor with respect to tank removal) unless prior authorization for such service has been granted by IMCO. Under the limitations of this warranty set by IMCO, IMCO fuel tanks cannot be tampered with or repaired by any source other than IMCO. If so, under no conditions, will IMCO honor the warranty.