462-219-AR512 Automatically retracts tabs when boat's ignition is turned off. Trailered boats have added defense from trim tab damage w/them "full-up" during hauling, trailering and storage. Assures trim tabs are all the way up every time boat is started if boat is not equipped w/trim tab indicators. Easily installs behind instrument panel. 12 volt.
|
|
462-219-BEA3000
- Superior seal design inspired by over 50 years of Bennett's proven success in hydraulic trimming techniques
- Robust, water-tight black nylon actuator provides trouble-free operation for years to come
- Completely waterproof, submersible and maintenance-free
- No external screws to cause leakage
- Description: Actuator w/Adjustable Upper Hinge, Volts: 12
|
|
462-219-BEA2000
- Superior seal design inspired by over 50 years of Bennett's proven success in hydraulic trimming techniques
- Robust, water-tight black nylon actuator provides trouble-free operation for years to come
- Completely waterproof, submersible and maintenance-free
- No external screws to cause leakage
- Description: Actuator w/Fixed Upper Hinge, Volts: 12
|
|
462-219-V351LK Economical, easy installation alternative to replacing Lenco actuator or purchasing an entire trim tab system. Uses existing Lenco trim planes. No need to patch or re-drill mounting holes. Bennett control fits and covers existing Lenco switch cutout.
V351LK Kit Includes:
- (1) V351HPU1 12V hydraulic power unit
- (2) A1101A actuators
- 20' hydraulic tubing
- (1) H1170LCHK Lenco conversion hardware kit
- (1) ES2000 rocker switch control w/22' wire harness
- (1) H1170A hardware kit
|
|
462-219-ES2000 This control is ergonomically designed, water resistant and provides a positive "click" when the trim tabs are engaged. Its lock-out feature prevents user from pressing down on opposite directions at the same time. The control is easy to install, fitting into a single 2 1/2" hole.
|
|
462-219-H1170A Includes two 3" brass pipe nipples, two brass female elbows, two tube bending clips, six #14 x 1 1/2" full threaded screws, four 1/4-20 x 3/4" machine screws, eight nylon hangers, one mounting bracket w/four #10 x 1" full-threaded screws, and two nuts w/ferrules.
|
|
462-219-HYDBOLTCON Contains:
(2) BOLT Actuators with wire and "Plug'n play" connector
(2) Bennett Adjustable Upper Hinges
(2) Lenco-compatible Upper Hinges
(2) Lenco-compatible Lower Hinges
(1) Hardware Bag
|
|
462-219-T112520 Bennett Hydraulic Tubing 20' Coil
Ref #: 14, Description: Hydraulic Tubing - 20' Coil
|
|
462-219-VP1138 Lexan Cover for Hydraulic Power Unit Ref #: 6
|
|
462-219-A1113 Bennett Lower Hinge for Actuator Description: Actuator Lower Hinge Sold: Each
|
|
462-219-A1114 Bennett Lower Hinge With Pin for Actuator Description: Lower Hinge & Pin Sold: Each
|
|
462-219-M120 The M80 and M120 Sports tabs are ideal for trailering boats in the 17' to 23' range. The unique batwing design provides 30 percent more lift than conventional trim tabs.
- Standard Kit: Includes 2 SS trim tabs, 2 actuators, hydraulic power unit, euro-style rocker switch, all necessary wiring, tubing & hardware
- Deluxe Kit: Same as standard kit, but includes an Electronic Indicator Control (EIC)
Span x Chord: 10" x 12", Boat Size: 20'-23'
|
|
462-219-M80 The M80 and M120 Sports tabs are ideal for trailering boats in the 17' to 23' range. The unique batwing design provides 30 percent more lift than conventional trim tabs.
- Standard Kit: Includes 2 SS trim tabs, 2 actuators, hydraulic power unit, euro-style rocker switch, all necessary wiring, tubing & hardware
- Deluxe Kit: Same as standard kit, but includes an Electronic Indicator Control (EIC)
Span x Chord: 8" x 10", Boat Size: 17'-20'
|
|
462-219-SLT10 For small boats, from 10 to 18 feet.
Easy to Install: Nothing to do inside the boat ? only the mounting of two actuators and two tabs at the transom. No template needed!
Kit includes:
- Two 14-gauge stainless steel trim tab assemblies with exclusive interlocking hinge
- Two strong and flexible composite actuators
- All stainless steel hardware
- 5-Year Warranty on All Components
For small boats, from 10 to 18 feet. Easy to Install: Nothing to do inside the boat ? only the mounting of two actuators and two tabs at the transom. No template needed! Kit includes:- Two 14-gauge stainless steel trim tab assemblies with exclusive interlocking hinge
- Two strong and flexible composite actuators
- All stainless steel hardware
- 5-Year Warranty on all components
Size: 10" W x 10" D", Boat Size: 15' - 18'
|
|
462-219-SLT6 For small boats, from 10 to 18 feet.
Easy to Install: Nothing to do inside the boat ? only the mounting of two actuators and two tabs at the transom. No template needed!
Kit includes:
- Two 14-gauge stainless steel trim tab assemblies with exclusive interlocking hinge
- Two strong and flexible composite actuators
- All stainless steel hardware
- 5-Year Warranty on All Components
For small boats, from 10 to 18 feet. Easy to Install: Nothing to do inside the boat ? only the mounting of two actuators and two tabs at the transom. No template needed! Kit includes:- Two 14-gauge stainless steel trim tab assemblies with exclusive interlocking hinge
- Two strong and flexible composite actuators
- All stainless steel hardware
- 5-Year Warranty on all components
Size: 6" W x 8" D", Boat Size: 10' - 14'
|
|
462-219-VP1135G Green Solenoid Valve Ref #: 9, Description: Solenoid Valve, Green Wire
|
|
462-219-VP1135R Red Solenoid Valve Ref #: 9, Description: Solenoid Valve, Red Wire
|
|
462-219-ST12 The Sport Tab Series is engineered for the demands of offshore water conditions for speeds up to 60 mph. Features two heavy duty stainless steel tabs with powder coated black finish, secured with heavy duty mounting plates and fasteners. The ST12 and ST16 Sport Tabs come with dual actuators on each tab. Kit also includes Euro-Style rocker switch, hydraulic power unit, and all necessary wiring, tubing and hardware. Span x Chord: 12" x 12", Actuator: Dual, Boat Size: Below 25' Sold: Box
|
|
462-219-ST16 The Sport Tab Series is engineered for the demands of offshore water conditions for speeds up to 60 mph. Features two heavy duty stainless steel tabs with powder coated black finish, secured with heavy duty mounting plates and fasteners. The ST12 and ST16 Sport Tabs come with dual actuators on each tab. Kit also includes Euro-Style rocker switch, hydraulic power unit, and all necessary wiring, tubing and hardware. Span x Chord: 12" x 16", Actuator: Dual, Boat Size: 25' and above Sold: Box
|
|
462-219-ST9 The Sport Tab Series is engineered for the demands of offshore water conditions for speeds up to 60 mph. Features two heavy duty stainless steel tabs with powder coated black finish, secured with heavy duty mounting plates and fasteners. The ST12 and ST16 Sport Tabs come with dual actuators on each tab. Kit also includes Euro-Style rocker switch, hydraulic power unit, and all necessary wiring, tubing and hardware. Span x Chord: 12" x 9", Actuator: Single, Boat Size: Below 21' Sold: Box
|
|
