Generic

Bilge Pump 12v 1100 GPH

• Size: 4-1/4"H x 2-3/8"W
• GPH: 1100
• Port Size: 1-1/8"
• Draw: 3.3A

Rule 12V Non-Automatic Bilge Pumps require a float or panel switch for operation and feature stainless steel shafts, water cooling and a vibration-free centrifugal impeller. The strainer bases can be snapped off for cleaning. They can run dry without damage and are non-sparking.

Bilge Pump 12v 1500 GPH

Rule 12V Non-Automatic Bilge Pumps require a float or panel switch for operation and feature stainless steel shafts, water cooling and a vibration-free centrifugal impeller. The strainer bases can be snapped off for cleaning. They can run dry without damage and are non-sparking.

• Size: 6"H x 4-1/4"W
• Draw: 4.8A
• GPH: 1500
• Port Size: 1-1/8"

Bilge Pump 12v 2000 GPH

Rule 12V Non-Automatic Bilge Pumps require a float or panel switch for operation and feature stainless steel shafts, water cooling and a vibration-free centrifugal impeller. The strainer bases can be snapped off for cleaning. They can run dry without damage and are non-sparking.

• Size: 6"H x 4-1/4"W
• Draw: 8.4A
• GPH: 2000
• Port Size: 1-1/8"

Bilge Pump 12V 360 GPH

• GPH: 360
• Port Size: 3/4"
• Draw: 2.1A
• Fuse: 2.5A
• Size: 3-1/2"H x 2-3/8"W

Rule 12V Non-Automatic Bilge Pumps require a float or panel switch for operation and feature stainless steel shafts, water cooling and a vibration-free centrifugal impeller. The strainer bases can be snapped off for cleaning. They can run dry without damage and are non-sparking.

Bilge Pump 12v 500 GPH 

• GPH: 360
• Port Size: 3/4"
• Draw: 1.9A
• Fuse: 2.5A
• Size: 3-1/2"H x 2-3/8"W

Rule 12V Non-Automatic Bilge Pumps require a float or panel switch for operation and feature stainless steel shafts, water cooling and a vibration-free centrifugal impeller. The strainer bases can be snapped off for cleaning. They can run dry without damage and are non-sparking.

Bilge Pump Auto 12v 1100 GPH

Rule 12V Automatic Bilge Pumps feature computerized operation and do not require a float switch. They have stainless steel shafts, water cooling and a vibration-free centrifugal impeller. The pump will turn on every 2-1/2 minutes to sense for water, and when water is present the pump will run until the water is removed. The strainer bases can be snapped off for cleaning. They can run dry without damage and are non-sparking.

• GPH: 1100
• Hose Dia.: 1-1/8"
• Draw: 3.3A
• Size: 4-1/2"H x 2-3/8"W

Bilge Pump Auto 12v 500 GPH

• Size: 4"H x 2-3/8"W
• GPH: 500
• Port Size: 3/4"
• Draw: 1.9A

The Rule 24V Automatic Bilge Pump features computerized operation and does not require a float switch. It has a stainless steel shaft, water cooling and a vibration-free centrifugal impeller. The pump will turn on every 2-1/2 minutes to sense for water, and when water is present the pump will run until the water is removed. The strainer bases can be snapped off for cleaning. It can run dry without damage and are non-sparking.

Injection molded ABS. This deluxe version comes with a 3 way switch allowing both automatic and manual switching of bilge pump. Includes 20 amp. circuit breaker.

Size: 2-3/16" x 3", Fastener: #6RH, Case: 5

Sold: Each

Bilge Pump w/Switch 500 GPH 12v 

Rule 12V Non-Automatic Bilge Pumps with Float Switches are ideal for small boats. They include a Rule-A-Matic float switch and feature a snap-off strainer for cleaning.

• Size: 3-1/2"H x 2-3/8"H
• 35A

This self-priming diaphragm pump includes a built-in hydraulic pulsation dampener, will produce a dry prime suction lift of 6' and is corrosion resistant. Use for bilge, shower, and sink drain applications. OK to run dry. Permanent magnet type motor. Complies with USCG Electrical Standards 183.410 and ISO 8846 marine for ignition protection on gasoline powered vessels. NMMA type accepted. Includes Pumpgard™ strainer.

GPM: 3.4, Ports: 3/4", Volts: 12, Amps: 8

Sold: Each

"The patented BilgeKleen System automatically removes oil, gas, diesel fuel and other hydrocarbon pollutants from bilge water before it is discharged overboard. Using a special filter medium, the BilgeKleen captures and binds to hydrocarbons and lets water pass through freely. As a result, 99.9% of the hydrocarbon pollutants are eliminated from discharge with no increase in pressure to the bilge pump. 3/4" NPT ports."

Description: Filter System, Size: 4.5" Dia x 12.5"H", Capacity: 25 GPM

Sold: Each

This is a machined billet aluminum swim step. Available in Powdercoated colors or Raw finish to fit 12 and 16 degree transoms (12 Degree uses included adjustment wedges on the brackets). All powdercoated steps are powdercoated at time of order and take 10-14 business days to ship. Kit includes backing plates, step, brackets and bolts. Note: As transom styles and thicknesses vary, kit does not include bolts to mount to transom. Brackets are 18" on center spacing. Steps are SOLD EACH. FITS LADDERS: 405-1008, 405-1017, 405-1011 AND 405-1020

See what each of our powder-coated finishes (both flat and glossy) look like under different lighting here!

Note: These are New old stock, and may have some minor scratches in the finish. Limited stock available.

BIMINI STRAP NYLON 8' Black

The Seadog Bimini Straps have a nylon strap construction with stainless steel hardware.

Features:
• Color: Black
• Strap length: 8'
• Strap width: 1"
• Snap length: 2-1/8"
• 2 per package

BIMINI STRAP NYLON 8' White

The Seadog Bimini Straps have a nylon strap construction with stainless steel hardware.

Features:
• Color: white
• Strap length: 8'
• Strap width: 1"
• Snap length: 2-1/8"
• 2 per package

Bimini Top Head Screw 1/4-28 Black

The Seadog Bimini Top Head Screw is constructed of injected nylon and is for use on bimini and canopy tops.

• Size: 1/4"L x 1-3/8"W
• Thread size: 1/4-28"
• Color: Black

Formulated to prevent the negative effects of ethanol-blended gasoline in the marine environment. Helps prevent phase separation in fuel tanks while controlling moisture and preventing corrosion for complete engine protection. Engine efficiency and performance is increased. Adds lubricity to vital engine parts. Detergents remove carbon deposits and varnishes, resulting in an overall better running, cleaner engine. Stabilizes gasoline for up to 18 months.

Size: 32 oz., Treats: 480 gal., Case: 6

Sold: Each

Black Anodized Tee -6T with -8 on the side

Black Anodize has a few scratches and dings in it, see photos.

• Available: (1) One
• SOLD AS IS
• NON RETURNABLE

Please study photo carefully, item is sold as shown.

Black Anodized, HP High Volume Fuel Filter/Separator w/ FST Filter and Hardin Head Bracket

This beautifully polished CNC crafted billet aluminum HP Fuel/Water separator filter kit is the perfect solution for standard and entry level performance marine engines. This unit features 1/2" NPT inlet/outlet ports on either side for convenient fuel system plumbing and return. Sturdy one piece billet construction allows easy remote mounting of the included FST fuel/water separator filters. The FST Performance RF500M fits the OEM Mercury racing filter head as well as the Hardin Marine Billet fuel / water separator head #625-7667. This filter removes contaminates down to as small as 3 Microns while separating water, with a flow rate of up to 200 GPH flow with less than 1% pressure drop at 75 psi through 579 sq.in. of filter material. Hose and fittings not included.

Features:

• Ideal for Marine fuel/water Separator applications 
• CNC-machined from billet 6061-T6 aluminum 
• High-Flow Design 
• 2 Plugs Included
• 1"-14 Thread 
• 1/2" NPT Inlet/Outlet ports 
• Kit Includes HP FST RF500M filter