Generic

Blue Anodized Tee -6T with -8 on the side

Oval fenders are ribbed and shaped to resist rolling, for less swing and wear on hull sides. The seamless design is guaranteed against splitting or bursting for the life of the fender. The thick-wall reinforced eye ends hold a heavy duty line up to 3/4'' thick. Lifetime guarantee. Made in the USA.

Size: 8" x 28", Color: Blue, Case: 4

Tinned copper for maximum current flow and corrosion resistance. Adhesive lined heat shrink tubing shrinks to form a tight seal and the ultimate in vibration and strain relief. (.250 Tab Size).

Wire Range: 16-14, Connection: Female, Color: Blue, Pack: 3

Sold: Pack

• Charges at the speed required by specific devices
• Internal filtering for reduced electronic interference
• Over temperature protection
• Protective dust cap keeps debris and moisture out
• Conformal coated circuit board for the harsh marine environment
• Regulatory RoHS, CE Certified

Mounts in a common 1-1/8" (29 mm) diameter hole

Description: Socket Mount, Input: 9V-32V, Output: 5V, 4.8A

Heavy duty circuit protection when switching and circuit protection are both required. Single lever operation is clearly visible. Ignition protected (conforming to SAE J1171), safe for installation aboard gas-powered boats. Weather resistant. 5/16-18 terminal studs. Maximum voltage 42 volts DC.

Amps: 30, Mount: Panel

Heavy duty circuit protection when switching and circuit protection are both required. Single lever operation is clearly visible. Ignition protected (conforming to SAE J1171), safe for installation aboard gas-powered boats. Weather resistant. 5/16-18 terminal studs. Maximum voltage 42 volts DC.

Amps: 50, Mount: Panel

Heavy duty circuit protection when switching and circuit protection are both required. Single lever operation is clearly visible. Ignition protected (conforming to SAE J1171), safe for installation aboard gas-powered boats. Weather resistant. 5/16-18 terminal studs. Maximum voltage 42 volts DC.

Amps: 80, Mount: Panel

Heavy duty circuit protection when switching and circuit protection are both required. Single lever operation is clearly visible. Ignition protected (conforming to SAE J1171), safe for installation aboard gas-powered boats. Weather resistant. 5/16-18 terminal studs. Maximum voltage 42 volts DC.

Amps: 100, Mount: Panel

Heavy duty circuit protection when switching and circuit protection are both required. Single lever operation is clearly visible. Ignition protected (conforming to SAE J1171), safe for installation aboard gas-powered boats. Weather resistant. 5/16-18 terminal studs. Maximum voltage 42 volts DC.

Amps: 150, Mount: Panel

Heavy duty circuit protection when switching and circuit protection are both required. Single lever operation is clearly visible. Ignition protected (conforming to SAE J1171), safe for installation aboard gas-powered boats. Weather resistant. 5/16-18 terminal studs. Maximum voltage 42 volts DC.

Amps: 30, Mount: Surface

Heavy duty circuit protection when switching and circuit protection are both required. Single lever operation is clearly visible. Ignition protected (conforming to SAE J1171), safe for installation aboard gas-powered boats. Weather resistant. 5/16-18 terminal studs. Maximum voltage 42 volts DC.

Amps: 50, Mount: Surface

Heavy duty circuit protection when switching and circuit protection are both required. Single lever operation is clearly visible. Ignition protected (conforming to SAE J1171), safe for installation aboard gas-powered boats. Weather resistant. 5/16-18 terminal studs. Maximum voltage 42 volts DC.

Amps: 70, Mount: Surface

Heavy duty circuit protection when switching and circuit protection are both required. Single lever operation is clearly visible. Ignition protected (conforming to SAE J1171), safe for installation aboard gas-powered boats. Weather resistant. 5/16-18 terminal studs. Maximum voltage 42 volts DC.

Amps: 80, Mount: Surface

Heavy duty circuit protection when switching and circuit protection are both required. Single lever operation is clearly visible. Ignition protected (conforming to SAE J1171), safe for installation aboard gas-powered boats. Weather resistant. 5/16-18 terminal studs. Maximum voltage 42 volts DC.

Amps: 90, Mount: Surface

Heavy duty circuit protection when switching and circuit protection are both required. Single lever operation is clearly visible. Ignition protected (conforming to SAE J1171), safe for installation aboard gas-powered boats. Weather resistant. 5/16-18 terminal studs. Maximum voltage 42 volts DC.

Amps: 100, Mount: Surface

Heavy duty circuit protection when switching and circuit protection are both required. Single lever operation is clearly visible. Ignition protected (conforming to SAE J1171), safe for installation aboard gas-powered boats. Weather resistant. 5/16-18 terminal studs. Maximum voltage 42 volts DC.

Amps: 120, Mount: Surface

Heavy duty circuit protection when switching and circuit protection are both required. Single lever operation is clearly visible. Ignition protected (conforming to SAE J1171), safe for installation aboard gas-powered boats. Weather resistant. 5/16-18 terminal studs. Maximum voltage 42 volts DC.

Amps: 150, Mount: Surface

"Industry standard BusBar features tin-plated copper bus, 1/4" stainless steel studs and 8-32 terminal screws. Continuous rating 150 Amps AC/DC, maximum voltage 300 Volts AC, 48 Volts DC."

Gang: 20 with cover, Stud: 1/4"-20", Terminal Screw: #8-32

Sold: Each

"Provides medium duty circuit protection for 25 to 200 amp loads when switching and circuit protection are both required. "Trip-free" - cannot be held closed after trip. Visible reset lever shows open condition. Drop in replacement for 185-Series circuit breakers. Maximum operating voltage 48 volts DC. Meets SAE J1171 external ignition protection requirements. IP67-protected against immersion up to 1 meter for 30 minutes."

Amps: 70, Mount: Panel

"Provides medium duty circuit protection for 25 to 200 amp loads when switching and circuit protection are both required. "Trip-free" - cannot be held closed after trip. Visible reset lever shows open condition. Drop in replacement for 185-Series circuit breakers. Maximum operating voltage 48 volts DC. Meets SAE J1171 external ignition protection requirements. IP67-protected against immersion up to 1 meter for 30 minutes."

Amps: 80, Mount: Panel