780-305
- 1-1/2" hose fitting.
- Prefect for bilge pump discharge fitting.
- Includes Nut.
|
|
462-88-1461120 Shields Vac Extra Heavy Duty/Commercial Grade Hose has a smooth cover and clear FDA formula PVC with a white vinyl helix. It is rated for full vacuum and is resistant to mild chemicals and saltwater. This hose is primarily used for bilge pump intake and discharge, potable water tank fill, drains (sinks, shower, and scupper), livewell intake and drain, and sanitation (intake, vent and pump out). This hose is utilized for below the waterline connections.Do not use ethylene glycol based antifreeze in hose. Do not use in pressurized water systems. ID: 1-1/2", Length: 100' Shields Vac Extra Heavy Duty/Commercial Grade Hose has a smooth cover and clear FDA formula PVC with a white vinyl helix. It is rated for full vacuum and is resistant to mild chemicals and saltwater. This hose is primarily used for bilge pump intake and discharge, potable water tank fill, drains (sinks, shower, and scupper), livewell intake and drain, and sanitation (intake, vent and pump out). This hose is utilized for below the waterline connections.
|
|
462-87-FLOUNDER Pollution-Free Naval Brass Marine BearingsBrass sleeve with rubber oil resistant shaft. The clean bearing that cushions the shaft, installs in minutes and lasts for yearsMorse Bearings are engineered to meet the toughest service requirements in corrosive and abrasive marine or industrial applications. The fluted rubber bearings surface will outlast hard surface bearings by more than 10 times. All materials meet U.S. Navy specs MIL-B-17901A CLII.Bearing Selection: Normal design practice is to select a bearing with a length equal to 4 times the shaft diameter.It may be acceptable to deviate from this rule when application load requirements permit the use of shorter bearing lengths. * Slimline Bearing.Bearing area is: Bearing I.D. (shaft diameter) multiply x bearing length. Loading capability is determined by: Multiplying that bearing area x 35 psi.Example: (RAY)- 3" shaft dia. x 12" length 36 sq." bearing area x 35 psi 1,260 lbs. Is bearing load capacity Shaft: 1-1/2" dia., OD: 2-3/8", Length: 6", Metal Wall: 1/8", Johnson Name: BRAD*, BF Goodrich Name: Kingdom Pollution-Free Naval Brass Marine BearingsBrass sleeve with rubber oil resistant shaft. The clean bearing that cushions the shaft, installs in minutes and lasts for yearsMorse Bearings are engineered to meet the toughest service requirements in corrosive and abrasive marine or industrial applications. The fluted rubber bearings surface will outlast hard surface bearings by more than 10 times. All materials meet U.S. Navy specs MIL-B-17901A CLII.Bearing Selection: Normal design practice is to select a bearing with a length equal to 4 times the shaft diameter.It may be acceptable to deviate from this rule when application load requirements permit the use of shorter bearing lengths. * Slimline Bearing.Bearing area is: Bearing I.D. (shaft diameter) multiply x bearing length. Loading capability is determined by: Multiplying that bearing area x 35 psi.Example: (RAY)- 3" shaft dia. x 12" length = 36 sq. Inch bearing area 36 sq. Inch bearing area x 35 psi = 1,260 lbs. Is bearing load capacity
|
|
462-88-1461126 Shields Vac Extra Heavy Duty/Commercial Grade Hose has a smooth cover and clear FDA formula PVC with a white vinyl helix. It is rated for full vacuum and is resistant to mild chemicals and saltwater. This hose is primarily used for bilge pump intake and discharge, potable water tank fill, drains (sinks, shower, and scupper), livewell intake and drain, and sanitation (intake, vent and pump out). This hose is utilized for below the waterline connections.Do not use ethylene glycol based antifreeze in hose. Do not use in pressurized water systems. ID: 1-1/2", Length: 50' Shields Vac Extra Heavy Duty/Commercial Grade Hose has a smooth cover and clear FDA formula PVC with a white vinyl helix. It is rated for full vacuum and is resistant to mild chemicals and saltwater. This hose is primarily used for bilge pump intake and discharge, potable water tank fill, drains (sinks, shower, and scupper), livewell intake and drain, and sanitation (intake, vent and pump out). This hose is utilized for below the waterline connections.
|
|
462-606-1401126 Features extra odor-resistant sanitation hose for all head and holding tank connections smooth light grey hose, hard PVC helix gives good flexibilty and bend radius. NOT for potable water applications, or for exposure to alcohol, petrochemicals or solvents. Maximum operating temps (+10° to140°F). Maximum working pressure 70 psi. 3 Year warranty. ID: 1-1/2", Length: 50', Bend: 9", VAC: 28
|
|
462-6-454901000 Designed for installation in waste discharge and bilge pumpout systems. Allows waste to be pumped directly into holding tank or diverted to an overboard discharge fitting. Empty two separate bilge sections with a single pump. All ABS and stainless steel construction. Withstands corrosive waste chemicals and bilge water. Hose: 1-1/2" Designed for installation in waste discharge and bilge pumpout systems. Allows waste to be pumped directly into holding tank or diverted to an overboard discharge fitting. Empty two separate bilge sections with a single pump. All ABS and stainless steel construction. Withstands corrosive waste chemicals and bilge water.
|
|
462-698-DV5606 Allows one pump to draw from two locations. Precision machined eliminating seepage and odor problems. PTFE lubricated non-stick operation. Complies with USCG rules for Type 3 waste systems. Enables flexibility of pump installations. Smooth lever operation. Hose: 1-1/2"
|
|
462-38-44450 Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS. Size: 1-1/2" x 1-1/4"
|
|
462-236-H140112P72 "304 Stainless Steel, .040 gauge. Holes are drilled on 2" centers with no stagger. Great for doors, large cabinets and hatches. Available in 6' lengths only. NOTE: A UPS/FedEx overlength/packaging fee may apply to this product."
Finish: Polished, Length: 6', Width: 1-1/2", Fastener: #6, Pkg.: Bulk
Sold: Each
|
|
462-38-44106 Brass 90° with female/female threads. NOT TO BE USED IN POTABLE WATER SYSTEMS. Size: 1-1/4" Sold: Each
|
|
462-38-44186 Brass 45° with female/female threads. NOT TO BE USED IN POTABLE WATER SYSTEMS. Size: 1-1/4"
|
|
462-38-44166 Bronze 90°, male/female threads. NOT TO BE USED IN POTABLE WATER SYSTEMS. Size: 1-1/4"
|
|
462-38-44476 Bronze NOT TO BE USED IN POTABLE WATER SYSTEMS. Size: 1-1/4"
|
|
462-38-44416 Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS. Size: 1-1/4"
|
|
462-38-44256 Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS. Size: 1-1/4"
|
|
462-38-44656 Imported. NOT TO BE USED IN POTABLE WATER SYSTEMS. Size: 1-1/4"
|
|
462-9-0528C0799A For the 528 series deck plates. Chrome plated bronze. Comes complete with O-ring and retaining cable.
Pipe: 1-1/4", Key: 124878DP
Sold: Each
|
|
462-38-44518 Bronze hex head. NOT TO BE USED IN POTABLE WATER SYSTEMS. Size: 1-1/4" x 1"
|
|
462-38-44446 Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS. Size: 1-1/4" x 1"
|
|
462-38-40121 1-1/4 X 2 Brass Pipe Nipple NOT TO BE USED IN POTABLE WATER SYSTEMS. Size: 1-1/4" dia.", Length: 2"
|
|