462-47-8112 Not to be used in potable water systems. Application: Manifold: 18-1997-1, 18-1998-1,
18-1982, 18-1983,
18-1929, 18-1933, 18-1925,
18-1926, 18-1898, Replaces: Crusader 97854, GM Small Block V8 305-350cu.in.
(Models: 220, 270, CM305, CM350XL, CM350HT)
GM Big Block V8 454 cu.in.
(Models: 454XL, 502XL, CH350, 454XL) Sold: Each
|
|
462-1-HF5538 "All SeaStar manual hydraulic steering systems utilize the same style of fittings for all applications. These are 3/8" compression fittings which utilize a 9/16"-24 extra fine thread." Type: Street Elbow, Material: Brass, Bag: 3 Sold: Bag
|
|
462-383-1200217 These fittings are made of the same fiberglass and fire retardant resins used to make Vernatube. Fittings, couplings and elbows are lightweight, strong, non-corroding and durable. OD: 1-1/2", Length: 6" Sold: Each
|
|
462-114-03320610 Allows customers to customize their fuel line assemblies to match existing connectors on their fuel tanks! All fittings are built to OEM specifications for replacement parts and use o-ring construction for tight, leak-free connections. NOT TO BE USED IN POTABLE WATER SYSTEMS. Connector: Elbow - Male/Female, Material: Brass, Thread: 3/8" NPT" Sold: Each
|
|
462-47-1934 Sierra manifolds are painted, packaged and leak tested. Replaces: Crusader 98068
|
|
462-47-1899 Sierra manifolds are painted, packaged and leak tested. Replaces: Pleasurecraft RO29001
|
|
462-47-1978 Sierra manifolds are painted, packaged and leak tested. Replaces: Mercruiser 76771A3, A2 Sold: Each
|
|
462-47-19741 Sierra manifolds are painted, packaged and leak tested. Replaces: Mercruiser 98502A2 Sold: Each
|
|
462-354-4262631 Cast brass/chrome plated.
Fastener: #6 RH, A: 1-7/16", B: 15/16", Pins: 3, Amps: 4
Sold: Each
|
|
462-354-4262641 Cast brass/chrome plated.
Fastener: #6 RH, A: 1-7/16", B: 15/16", Pins: 4, Amps: 5
Sold: Each
|
|
462-16-24870 The D-L StrongArm Electric Winch gear train uses heat-treated sintered-iron gears for smooth, quiet operation. The final drive gears are heat-treated high carbon steel for maximum strength. Precision needle bearings are used in the high-load areas for low friction and long life. The one piece die formed base is made of heavy gauge steel. The stainless steel front frame protects the cable or strap from abrasion.
- Available in 120V AC or high torque 12V DC
- 12V switch includes wiring harness, 25' positive battery wire and 8' ground wire
- High impact case provides excellent weather resistance and protection
- Attractive brushed stainless steel front plate for superior rust resistance
- Die formed base is adapted for quick mounting applications
- Cable hook safety snap keeps load securely attached
- Standard equipment includes an emergency crank handle
Description: 7/32" x 25' Cable, Max Load: 3000 lbs, Amps: 70, Volts: 12
|
|
462-16-24872 The D-L StrongArm Electric Winch gear train uses heat-treated sintered-iron gears for
smooth, quiet operation. The final drive gears are heat-treated high carbon steel for
maximum strength. Precision needle bearings are used in the high-load areas for low
friction and long life. The one piece die formed base is made of heavy gauge steel.
The stainless steel front frame protects the cable or strap from abrasion.
- 12V switch includes wiring harness, 25' positive battery wire and 8' ground wire
- High impact case provides excellent weather resistance and protection
- Attractive brushed stainless steel front plate for superior rust resistance
- Die formed base is adapted for quick mounting applications
- Cable hook safety snap keeps load securely attached
- Standard equipment includes an emergency crank handle
Description: 7/32" x 25' Cable, Max Load: 2700 lbs, Amps: 8, Volts: 120
|
|
462-16-24874 The D-L StrongArm Electric Winch gear train uses heat-treated sintered-iron gears for
smooth, quiet operation. The final drive gears are heat-treated high carbon steel for
maximum strength. Precision needle bearings are used in the high-load areas for low
friction and long life. The one piece die formed base is made of heavy gauge steel.
The stainless steel front frame protects the cable or strap from abrasion.
- Available in 120V AC or high torque 12V DC
- 12V switch includes wiring harness, 25' positive battery wire and 8' ground wire
- High impact case provides excellent weather resistance and protection
- Attractive brushed stainless steel front plate for superior rust resistance
- Die formed base is adapted for quick mounting applications
- Cable hook safety snap keeps load securely attached
- Standard equipment includes an emergency crank handle
Description: 7/32" x 50' Cable, Max Load: 4,500 lbs., Amps: 70, Volts: 12
|
|
462-16-24876 The D-L StrongArm Electric Winch gear train uses heat-treated sintered-iron gears for
smooth, quiet operation. The final drive gears are heat-treated high carbon steel for
maximum strength. Precision needle bearings are used in the high-load areas for low
friction and long life. The one piece die formed base is made of heavy gauge steel.
The stainless steel front frame protects the cable or strap from abrasion.
- 12V switch includes wiring harness, 25' positive battery wire and 8' ground wire
- High impact case provides excellent weather resistance and protection
- Attractive brushed stainless steel front plate for superior rust resistance
- Die formed base is adapted for quick mounting applications
- Cable hook safety snap keeps load securely attached
- Standard equipment includes an emergency crank handle
Description: 7/32" x 50' Cable, Max Load: 4000 lbs, Amps: 8, Volts: 120
|
|
462-16-25200 "12V Power-in and freewheel-out (TW4000), power-in power-out and freewheel-out (TW9000) operation with positive mechanical brake.
Clutch control knob engages gears or releases load in a controlled freewheel mode. For boat trailers and other horizontal pulling applications. Equipped with 20' x 2" polyester strap and hook.
Not for movement of humans." Max Load: 4000 lbs., Speed: 22 f.p.m. Sold: Each
|
|
462-78-EST12 Electro Scan consistently controls the electrodes to reduce power consumption by up to 36%. New LCD Display provides detailed information on system.
- Can be used with both manual and electric toilets
- Generates its own natural disinfectant from salt water
- Treats each flush as waste is generated
- Discharges with treatment levels that are safe for environmentally sensitive areas
- Easy to install
- Optional toilet sensor starts treatment unit when manual toilet is flushed
- Optional control available for use with two toilets
- Optional salt feed systems available when using fresh or brackish water
Volts: 12
|
|
462-354-1558321 Electrogalvanized Forged Steel A: 4-1/4", B: 11/16", C: 3/4", Case: 10 Sold: Each
|
|
462-354-3280401 Electrogalvanized steel anchor lift and lock system makes it easier to pull up your anchor and locks it in place.
Line: 3/8" dia. Max", A: 6-13/16", B: 13/16", C: 1-7/8", Fastener: #10 RH
Sold: Each
|
|
462-354-1558221 Electrogalvanized Forged Steel A: 3-7/8", B: 11/16", C: 3/4" Sold: Each
|
|
462-698-BE9003 This innovative sealed, solid-state switch has no moving parts to wear out or seals to leak. It senses bilge water levels and automatically controls the pump. All components are protected from exposure to solvents or corrosion. Volts: 12-24, Amps: 20 Sold: Each
|
|
