462-88-290S4000 Maximum operating temperature 450°F (232°C). Very high temperature silicone exhaust connectors. Meets SAE J2006 Type R3. Style: 90° Elbow, A: 5-3/4", B: 5-3/4", C: 1-1/2", T: 1/4"
|
|
462-9-1056DP0CHR Chrome plated zinc with stainless steel spring.
Size: 1-1/8" x 9/16", Fastener: #6
Sold: Each
|
|
462-354-2223351 Extruded brass.
Finish: Brass, A: 1-1/8", B: 1-5/16", Fastener: #6 FH, Pack: 2
Sold: Pack
|
|
462-9-1021DP0BLK Black plastic with integral spring.
Size: 1-3/16" x 5/8", Fastener: #6, Pack: 2
Sold: Pack
|
|
462-47-19091 Sierra manifolds are painted, packaged and leak tested. Replaces: OMC Sterndrive/Cobra 913784, 3855270, 3850456, 3857944 and Volvo 3855270-9, 3857944-7, 3863061 Sold: Each
|
|
462-1-HF5534 "All SeaStar manual hydraulic steering systems utilize the same style of fittings for all applications. These are 3/8" compression fittings which utilize a 9/16"-24 extra fine thread." Type: Elbow Fitting, Material: Brass, Bag: 3 Sold: Bag
|
|
462-275-2443926 "Accommodates all Shurflo demand pumps with 1/2" MPT. Hand tighten." Type: Elbow, wing nut, Size: 1/2" - 14" NPT (F) x 1/2" Barb"
|
|
462-275-2443946 "Accommodates all Shurflo demand pumps with 1/2" MPT. Hand tighten." Type: Elbow, wing nut, Size: 1/2" - 14" NPT (F) x 3/4" Barb"
|
|
462-275-2443936 "Accommodates all Shurflo demand pumps with 1/2" MPT. Hand tighten." Type: Elbow, wing nut, Size: 1/2" - 14" NPT (F) x 5/8" Barb"
|
|
462-47-8112 Not to be used in potable water systems. Application: Manifold: 18-1997-1, 18-1998-1, 18-1982, 18-1983, 18-1929, 18-1933, 18-1925, 18-1926, 18-1898, Replaces: Crusader 97854, GM Small Block V8 305-350cu.in. (Models: 220, 270, CM305, CM350XL, CM350HT) GM Big Block V8 454 cu.in. (Models: 454XL, 502XL, CH350, 454XL) Sold: Each
|
|
462-1-HF5538 "All SeaStar manual hydraulic steering systems utilize the same style of fittings for all applications. These are 3/8" compression fittings which utilize a 9/16"-24 extra fine thread." Type: Street Elbow, Material: Brass, Bag: 3 Sold: Bag
|
|
462-383-1200217 These fittings are made of the same fiberglass and fire retardant resins used to make Vernatube. Fittings, couplings and elbows are lightweight, strong, non-corroding and durable. OD: 1-1/2", Length: 6" Sold: Each
|
|
462-114-03320610 Allows customers to customize their fuel line assemblies to match existing connectors on their fuel tanks! All fittings are built to OEM specifications for replacement parts and use o-ring construction for tight, leak-free connections. NOT TO BE USED IN POTABLE WATER SYSTEMS. Connector: Elbow - Male/Female, Material: Brass, Thread: 3/8" NPT" Sold: Each
|
|
462-47-1934 Sierra manifolds are painted, packaged and leak tested. Replaces: Crusader 98068
|
|
462-47-1899 Sierra manifolds are painted, packaged and leak tested. Replaces: Pleasurecraft RO29001
|
|
462-47-1978 Sierra manifolds are painted, packaged and leak tested. Replaces: Mercruiser 76771A3, A2 Sold: Each
|
|
462-47-19741 Sierra manifolds are painted, packaged and leak tested. Replaces: Mercruiser 98502A2 Sold: Each
|
|
462-354-4262631 Cast brass/chrome plated.
Fastener: #6 RH, A: 1-7/16", B: 15/16", Pins: 3, Amps: 4
Sold: Each
|
|
462-354-4262641 Cast brass/chrome plated.
Fastener: #6 RH, A: 1-7/16", B: 15/16", Pins: 4, Amps: 5
Sold: Each
|
|
462-16-24870 The D-L StrongArm Electric Winch gear train uses heat-treated sintered-iron gears for smooth, quiet operation. The final drive gears are heat-treated high carbon steel for maximum strength. Precision needle bearings are used in the high-load areas for low friction and long life. The one piece die formed base is made of heavy gauge steel. The stainless steel front frame protects the cable or strap from abrasion.
- Available in 120V AC or high torque 12V DC
- 12V switch includes wiring harness, 25' positive battery wire and 8' ground wire
- High impact case provides excellent weather resistance and protection
- Attractive brushed stainless steel front plate for superior rust resistance
- Die formed base is adapted for quick mounting applications
- Cable hook safety snap keeps load securely attached
- Standard equipment includes an emergency crank handle
Description: 7/32" x 25' Cable, Max Load: 3000 lbs, Amps: 70, Volts: 12
|
|