462-34-ARG1 Service kits for ARG strainers. Contain cap O-ring, sight glass O-ring, washer and drain wingnut gasket. Description: Repair Kit, Fits: ARG-500/750 Sold: Each
|
|
462-34-ARG2 Service kits for ARG strainers. Contain cap O-ring, sight glass O-ring, washer and drain wingnut gasket. Description: Repair Kit, Fits: ARG-1000/1250 Sold: Each
|
|
462-34-ARG506 Drain Wingnut with O-Ring, Pre- 8/01 Description: Drain Wingnut w/ O-ring , Fits: ARG prior to 8-01 Sold: Each
|
|
462-34-AS100 "AS-100 uses the simple and reliable pressure fluctuation from a rising or falling bilge water level to turn your bilge pump on and off automatically. No floats to stick or fill with water. Approximate levels are on at 2-3/4" of bilge level and off at 1". Use with a pump that draws up to 10-amps running continuously or up to 20 amps running intermittently. NOT TO BE USED IN POTABLE WATER SYSTEMS."
|
|
462-34-ASC1250 Access to the thru-hull fitting and seacock beneath the hull strainer is made easy with the patented access door design. No need to remove the entire strainer to clear debris or marine growth. NOT TO BE USED IN POTABLE WATER SYSTEMS. Size: 7" x 3.38", Max Thru-Hull: 1-1/4", Fastener: 4-#10, Case: 2
|
|
462-34-ASC2000 Access to the thru-hull fitting and seacock beneath the hull strainer is made easy with the patented access door design. No need to remove the entire strainer to clear debris or marine growth. NOT TO BE USED IN POTABLE WATER SYSTEMS. Size: 10.25" x 4.38", Max Thru-Hull: 2", Fastener: 5-#10, Case: 2
|
|
462-34-BB1 Flanged seacock installation is improved with the use of a backing block between the valve flange and the hull.
- Each size fits multiple seacock sizes
- Press threaded inserts into the hull side of the backing block into the holes that match the seacock flange
- 1/2" thickness is rigid enough for a secure installation but flexible enough to conform to minor hull curvature
- Will not swell or absorb moisture
Size: 4.29" Dia., Fits: 3/4" & 1" Seacocks, Bolt: 5/16" - 18"
|
|
462-34-BB2 Flanged seacock installation is improved with the use of a backing block between the valve flange and the hull.
- Each size fits multiple seacock sizes
- Press threaded inserts into the hull side of the backing block into the holes that match the seacock flange
- 1/2" thickness is rigid enough for a secure installation but flexible enough to conform to minor hull curvature
- Will not swell or absorb moisture
Size: 5.38" Dia., Fits: 1-1/4" & 1-1/2" Seacocks, Bolt: 5/16" - 18"
|
|
462-34-BB3 Flanged seacock installation is improved with the use of a backing block between the valve flange and the hull.
- Each size fits multiple seacock sizes
- Press threaded inserts into the hull side of the backing block into the holes that match the seacock flange
- 1/2" thickness is rigid enough for a secure installation but flexible enough to conform to minor hull curvature
- Will not swell or absorb moisture
Size: 7.13" Dia., Fits: 2" & 2-1/2" Seacocks, Bolt: 3/8" - 16"
|
|
462-34-BV1000 Features patented field-selectable and changeable direction of rotation-permits installation in otherwise unusable locations. Tri-flange base and mount hole pattern provide easy retrofit when replacing most popular brands. Handle has a square hole that accepts standard ratchet-helps to reach hard-to-reach valves, and eases operation of hard to actuate valves. Stainless steel ball and stem, PTFE seats and seals. Serviceable when installed, drain plug on both sides for efficient winterization. NOT TO BE USED IN POTABLE WATER SYSTEMS. Ports: 1" NPT" Sold: Each
|
|
462-34-BV1250 Features patented field-selectable and changeable direction of rotation-permits installation in otherwise unusable locations. Tri-flange base and mount hole pattern provide easy retrofit when replacing most popular brands. Handle has a square hole that accepts standard ratchet-helps to reach hard-to-reach valves, and eases operation of hard to actuate valves. Stainless steel ball and stem, PTFE seats and seals. Serviceable when installed, drain plug on both sides for efficient winterization. NOT TO BE USED IN POTABLE WATER SYSTEMS. Ports: 1-1/4" NPT" Sold: Each
|
|
462-34-BV1500 Features patented field-selectable and changeable direction of rotation-permits installation in otherwise unusable locations. Tri-flange base and mount hole pattern provide easy retrofit when replacing most popular brands. Handle has a square hole that accepts standard ratchet-helps to reach hard-to-reach valves, and eases operation of hard to actuate valves. Stainless steel ball and stem, PTFE seats and seals. Serviceable when installed, drain plug on both sides for efficient winterization. NOT TO BE USED IN POTABLE WATER SYSTEMS. Ports: 1 1/2" NPT" Sold: Each
|
|
462-34-BV2000 Features patented field-selectable and changeable direction of rotation-permits installation in otherwise unusable locations. Tri-flange base and mount hole pattern provide easy retrofit when replacing most popular brands. Handle has a square hole that accepts standard ratchet-helps to reach hard-to-reach valves, and eases operation of hard to actuate valves. Stainless steel ball and stem, PTFE seats and seals. Serviceable when installed, drain plug on both sides for efficient winterization. NOT TO BE USED IN POTABLE WATER SYSTEMS. Ports: 2" NPT" Sold: Each
|
|
462-34-BV2500 Features patented field-selectable and changeable direction of rotation-permits installation in otherwise unusable locations. Tri-flange base and mount hole pattern provide easy retrofit when replacing most popular brands. Handle has a square hole that accepts standard ratchet-helps to reach hard-to-reach valves, and eases operation of hard to actuate valves. Stainless steel ball and stem, PTFE seats and seals. Serviceable when installed, drain plug on both sides for efficient winterization. NOT TO BE USED IN POTABLE WATER SYSTEMS. Ports: 2-1/2" NPT" Sold: Each
|
|
462-34-BV3000 Features patented field-selectable and changeable direction of rotation-permits installation in otherwise unusable locations. Tri-flange base and mount hole pattern provide easy retrofit when replacing most popular brands. Handle has a square hole that accepts standard ratchet-helps to reach hard-to-reach valves, and eases operation of hard to actuate valves. Stainless steel ball and stem, PTFE seats and seals. Serviceable when installed, drain plug on both sides for efficient winterization. NOT TO BE USED IN POTABLE WATER SYSTEMS. Ports: 3" NPT" Sold: Each
|
|
462-34-BV750 Features patented field selectable and changeable direction of rotation-permits installation in otherwise unusable locations. Tri flange base and mount hole pattern provide easy retrofit when replacing most popular brands. Handle has a square hole that accepts standard ratchet-helps to reach hard-to-reach valves, and eases operation of hard to actuate valves. Stainless steel ball and stem, PTFE seats and seals. Serviceable when installed, drain plug on both sides for efficient winterization. NOT TO BE USED IN POTABLE WATER SYSTEMS.
Ports: 3/4" NPT
|
|
462-34-C6012V "Completely assembled and water tested salt water washdown system provides pressurized water on demand. For deck, anchor wash, or both. Features permanent magnet ball bearing motor, SPO-60-N vane pump, P-9021 in-line check valve and PGN-50 salt water nozzle. Coupled to combination check valve/pressure switch assembly. Mounted on a ready to install platform. Use PST-1 pressure storage tank to reduce pump cycling. PSI range is 15-35. Size: 9-1/2" L x 6-1/2" W x 4-3/4" H. NOT TO BE USED IN POTABLE WATER SYSTEMS." GPM: 6.5, Volts: 12, Amps: 17 Sold: Each
|
|
462-34-CP20 Ideal for baitwell or any onboard pumping job that needs high flow and low pressure. Includes garden hose adapter. Motor is ignition protected. Includes an adapter for garden hose conection.
NOT TO BE USED IN POTABLE WATER SYSTEMS. GPM: 17, Ports: "Inlet: 3/4" NPT/Outlet: 1/2" NPT" Sold: Each
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> In-line check valve may be used in water or fuel systems to keep pumps primed and to prevent back-flow in pressure systems. Unique design reduces flow turbulence and restriction, and improves pump performance. Cast bronze construction. NPT threaded ports. NOT TO BE USED IN POTABLE WATER SYSTEMS.
Sizes:
- Pipe: 1", A: 1-7/8", B: 3-5/16", C: 1-7/16"
- Pipe: 1-1/4", A: 2-3/8", B: 4", C: 1-7/8"
- Pipe: 1-1/2", A: 2-15/16", B: 4-11/32", C: 2-7/32"
- Pipe: 2", A: 3-5/8", B: 5", C: 2-3/4"
- Pipe: 1/2", A: 1-7/16", B: 2-7/16", C: 1"
- Pipe: 3/4", A: 1-21/32", B: 2-9/16", C: 1-3/16"
|
|
462-34-FBV1000 Patented field reversible handle allows you to select the closed position orientation (Clockwise or Counterclockwise) that best suits the installation. Handle has square hole to accept standard ratchet, to help reach valves in hard-to-reach location and eases operation of hard to actuate valves. Chrome plated solid brass ball (not a hollow ball). Stainless steel handle and hardware. PTFE seats and seals. Drain plug on both sides for efficient winterization. NOT TO BE USED IN POTABLE WATER SYSTEMS. Ports: "Bottom: 1" NPS/Top: 1" NPT" Sold: Each
|
|
