462-88-2500584 Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
ID: 5/8", OD: 61/64", Length: 12-1/2'
|
|
462-88-2506004 Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
ID: 6", OD: 6-21/32", Length: 12-1/2'
|
|
462-88-2500784 Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
ID: 7/8", OD: 1-3/16", Length: 12-1/2'
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> This low profile molded hatch has quick action dogs, collet arm, vent position and smoked acrylic lens.
Trim ring & screen included.
Sizes:
- OD: 19-1/8" x 19-3/8" OD
- Cut Out: 16-7/8" x 16-7/8"
- Flange: 18 7/8" X 18 7/8"
- OD: 20-3/8" x 15-18" OD
- Cut Out: 17-7/8" x 12-7/8"
- Flange: 19 7/8" X 14 7/8"
|
|
464-221840-1 HATCH COVER PULL ONLY SS
The Sea-Dog Hatch Cover Pull is made of stamped 304 stainless steel.
Size:
- Height: 1-15/16"
- Base diameter: 1-1/4"
|
|
462-9-0697DP0CHR "Chrome plated brass and zinc. Keeper is 1-1/2" x 5/8"." Size: 1-1/2" x 3/4", Fastener: #8 Sold: Each
|
|
462-9-0769DP0CHR Chrome plated brass and zinc. Black plastic handle. Description: Hatch Fastener, Base: 1-1/2" x 5/8", Fastener: #8 Chrome plated brass and zinc. Black plastic handle.
|
|
462-354-2224251 Chrome-plated cast brass. Carded. A: 2-15/16", B: 2-3/16", C: 3/8", D: 1/16", E: 1-3/16", Fastener: #8 FH
|
|
462-9-0951DP1CHR "Hatch Hinge, Chrome/Bronze 3" x 1-1/2"
Material: Chrome Bronze, Size: 3" x 1-1/2", Fastener: #8, Pack: 2
Sold: Pack
|
|
462-9-0808DP0CHR "Hatch Hinge, Chrome/Zinc 3" x 1-1/2"
Material: Chrome Plated Zinc, Size: 3" x 1-1/2", Fastener: #8, Pack: 2
Sold: Pack
|
|
462-622-70381001 "In case of power failure, this bracket allows you to pull the hatch open 5" in order to remove pull pin for access."
Description: SS Slide Bracket, Non-locking
|
|
462-49-G9951111 This low profile molded hatch has quick action dogs, collet arm, vent position and smoked acrylic lens.
Trim ring & screen included. OD: 22-1/16" x 22-5/16" OD", Cut Out: 19-3/4" x 19-3/4", Flange: 21 7/8" X 21 7/8" Sold: Each
|
|
462-9-1091DP1WHT "For smooth and carpeted surfaces. Chrome plated zinc "T" handle and S.S. stem. Easily installs in a 2-1/2" diameter hole. All have a 3" diameter face plate. DP1 cam bar adjustment 3/4" - 2-3/8", DP4 extra long cam bar adjustment 1/2"-3"." Description: w/Offset Cam Bar , Type: Lock, Color: White Sold: Each
|
|
462-354-3216501 The Sea-Dog Stainless Steel Hatch Spring has an internal wire that prevents the spring from being overextended during normal use. Not recommended for applications where hatch will scoop wind while boat is underway and overextend.
Length: 8-5/8", Fastener: "#10 RH or 3/16" pop rivet"
Sold: Each
|
|
462-354-3216701 Hatch Springs are made of formed 7 stamped 304 stainless steel. Ideal for use on lighter hatches, dock boxes and lazarettes. Not recommended for applications where hatch will scoop wind while boat is under way and over-extend spring.
Length: 10-1/8"
Sold: Each
|
|
462-354-3216801 Hatch Springs are made of formed 304 stainless steel with injection molded nylon mounts. Big, heavy-duty spring that is ideal for larger hatches and dock boxes. Strong stainless steel spring with internal safety cable that prevents spring from being overextended during normal use. Mounts heavy-duty molded nylon pads on both ends.
Length: 11-5/8"
Sold: Each
|
|
464-321650-1 Hatch Spring SS 8-3/4"
- Size: (A) 8-5/8" (B) 1-1/16" (C) 3/4"
- Fastener: #10 RH & 3/16" Pop Rivet
- Internal wire prevents spring from overextending
|
|
462-9-0762DP2CHR Chrome plated brass. Screw size is 8. Length: 12" , Fastener: #8, Pack: 2
|
|
462-232-LS2DP The stainless steel spring then supports the lid, hatch or cover in the open position. Stainless steel spring with nylon ends for mounting with four countersunk screws (not included). Description: LS2: Supports 10 lbs, Size: 7/16? diam. x 8-1/2? L, Fastener: #8
|
|
462-835-FT1P FishTrax™ 1 handheld fish finder is packed full of features that will help you take your fishing to the next level. VariableZone™ Water Temperature gives you instant water temperature readings and the Fish Depth Scale allowing lets you know exactly how far down the fish is. The VirtuView™ display on your Fish Finder depicts bottom structure with a series of rock indicators.
The FishTrax™ Intelligent Sonar detects depth, locates fish, and defines bottom contour, composition and structure. Simply toss the sonar sensor in the water (or place it inside the hull of your boat) and power the display on.
Includes: FishTrax™ 1 ICON Display and Airmar® Floatable, Trollable, Boat Mountable Transducer. : Sold: Each
|
|
