462-1-HO5114 "Can be used with all SeaStar systems except BayStar, Capilano and 3-line inboard systems. Includes 2 hoses. ID of 5/16". Not for use with SeaStar Pro systems." Length: 14', Box: 2 Sold: Box
|
|
462-354-32129 Formed and Stamped 304 Stainless/Nylon
A: 14-3/16", B: 24-3/16", C: 1-3/8", D: 1-3/16"
A: 14-15/16", B: 24", C: 1-3/8", D: 1-3/16"
|
|
462-622-15038101 Fully submersible, precise-control electric actuators. All Plug & Play Deutsch connections, Blades are constructed of 12-gauge Electro-Polished 304 stainless steel with 1" turned up edges (the 16x12 and 18x14 blades have an 85° inside taper) and come with 1/4" diameter stainless steel hinge pins and stainless steel mounting screws. Min. transom height: 9"L models - 13.5", 12" and longer models - 11". 2" Hinge height.
Kit Includes:
12-volt Standard actuators (2) with 5/16" Stainless Steel mounting bolts
6' leads and Deutsch connectors
20' actuator extension harnesses (2) with Deutsch connectors
Stainless Steel electro-polished trim tab blades-12 gauge (2)
Stainless Steel mounting hardware
Switch kits sold separately
Size: 14"L x 12"W", Boat Size: 19'-34', Volts: 12
|
|
462-239-591458 Thrusters give you total control of your boat when docking and departing regardless of wind or current conditions.
- No reservoir to install, no leaks and no maintenance
- High integrity seal
- Black box electronics protect motor
- Hardened and ground spiral bevel gear for maximum efficiency and quiet power transmission
- Self resetting thermal protection on all motors
- Easy plug together switch connections
- Minimum silhouette hub for smooth water flow
- Includes a spline driven, high performance, 5-blade propeller which gives equal thrust in both direction
A complete system Requires a thruster unit, control panel, control cable, fuse holder, fuse and tunnel.
591458 is sold as a complete kit including the 140TT2.0 thruster, fuse and fuse holder, 7m control cable and locking joystick, only the tunnel needs to be ordered separately.
Model: KIT: 140TT 2.0 kW, Description: 2.7 hp, 5-1/2" (140mm) Tunnel, Composite gearbox, Thrust: 81 lbs., Volts: 12
|
|
128-144 144 B&M Intercooler
144 SuperChiller Intercooler, Holley/B&MIf you're looking for a cost effective method of increasing your supercharged engine's output and improving reliability, install a SuperChiller Intercooler. Bolt-on 75 to 150 horsepower. The SuperChiller Intercooler dramatically reduces the air temperature of the intake charge, thereby increasing air density to the combustion chamber. A cooler, denser air/fuel mixture takes up less space inside each cylinder, allowing the mixture to provide an increased intake charge without the risk of detonation. SuperChiller Intercoolers are available for 6:71 - 14:71, Holley/B&M, Weiand and MerCruiser supercharger systems.
|
|
462-137-7200735 Ethernet Cable, AS EC 15E Description: 15', Model: AS EC 15 E
|
|
462-6-439900014 "Enables remote controls to be fitted further from the light than standard cables allow, and are needed to install secondary remote control kits.
For 135 SL, 146SL, 155SL (12 Volt dc), 255SL, 5" (130) and 7" (180) RC models."
Length: 15'
Sold: Each
|
|
462-58-4401 Rock hard outer shell, seamless & almost indestructible. Core is 3 lb. high density polyurethane foam. All eyebolts are hot-dipped galvanized medium carbon steel. Eyebolts are permanently bonded inside buoy preventing wear and eventual loss of floatation. Dia.: 15", Buoyancy: 46 lbs., Case: 4
|
|
462-167-5216 This light-weight, black VHF Marine antenna is specially built for sailboat racers. Its 15" center-loaded design delivers Unity Gain, and it comes with a black L-bracket for mounting. Its connector is gold-plated. Stainless steel whip.
|
|
462-218-F7W Unique vinyl valve seals securely Even wall thickness for maximum strength and durability Multiple ribbed reinforced ropeholds Twin-eye design for vertical or horizontal use Designed for use in permanent unprotected moorings, pilings, locks and concrete walls Size: 15" x 41" , Case: 5 - Unique vinyl valve seals securely
- Even wall thickness for maximum strength and durability
- Multiple ribbed reinforced ropeholds
- Twin-eye design for vertical or horizontal use
- Designed for use in permanent unprotected moorings, pilings, locks and concrete walls
|
|
462-218-F8W Unique vinyl valve seals securely Even wall thickness for maximum strength and durability Multiple ribbed reinforced ropeholds Twin-eye design for vertical or horizontal use Designed for use in permanent unprotected moorings, pilings, locks and concrete walls Size: 15" x 58", Case: 4 - Unique vinyl valve seals securely
- Even wall thickness for maximum strength and durability
- Multiple ribbed reinforced ropeholds
- Twin-eye design for vertical or horizontal use
- Designed for use in permanent unprotected moorings, pilings, locks and concrete walls
|
|
462-74-30800 Compatible with all antifreezes including orange Dex-Cool™. Lasts for 5 years or 150,000 miles. Protects all engine metals. Reduces formation of abrasive solids, helps extend water pump life. Orange in color. Sold in case packs only.
Size: Gallon, Case: 6
Sold: Each
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> Permits use of 15 amp or 20 amp 125 volt straight blade plug with 30 amp 125 volt twist-lock locking type receptacle. Not recommended for use in wet locations. Female (Boat): 15-20A/125V Straight Blade, Male (Dock): 30A Twist Lock Sold: Each
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> Fully molded, watertight design. Female (Boat): 15 or 20A, 125V
Straight Blade, Male (Dock): 30A, 125V
Locking Plug, Color: Yellow Sold: Each
|
|
462-11-OP22891 "Used for Electric Fuel Pump Shut Off.
Thread size: 1/8" - 27
Terminal type: 10-32 stud" " Used for Electric Fuel Pump Shut Off. Thread size: 1/8" - 27 Terminal type: 10-32 stud " Description: Set at 15 psi Sold: Each
|
|
615-552-118016 -16 AN 180° Fixed Hose End
- Available: (5) Five
- Condition: Overstock
|
|
615-552-104516 -16 AN 45° Fixed Hose End
- Available: (6) Six
- Condition: Overstock
|
|
462-780-BTD6 Size: 2" x 16', Break Strength: 1200 lbs.
- 2" Nylon webbing
- Heavy gauge zinc-plated hardware
- Captive "J" hook
- Self tightening, easy-lock over centering buckle
- Velcro pad to protect surfaces
|
|
462-274-542050 + Option(s)
- Cut to length and easily terminate wires
- Weather resistant
- Backed with 3m adhesive
- Operates with 12v power supply
- 18 Diodes per foot
- 16' Lengths require leads to be soldered on for power connection
Length: 16', Colors: Red, Blue, Amber, Green or Clear Volts: 12
|
|
462-1-HO5116 "Can be used with all SeaStar systems except BayStar, Capilano and 3-line inboard systems. Includes 2 hoses. ID of 5/16". Not for use with SeaStar Pro systems." Length: 16', Box: 2 Sold: Box
|
|
