462-11-TG21130 Duckbill Toggle Switch
- Non-corrosive plastic construction, plastic handle
- 1/2" mounting hole
- Rated 15 amp @ 12 VDC
- TG21360 Glows red when ON, TG21390 glows green when ON
- ON in parenthesis (On) indicates a momentary position
Description: On/Off, Terminals: 2 Blade, Type: SPST
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> "Two positions: off/on(ignition). Two screw terminals, brass case and mounting hardware. Chrome plated brass face nut. Brass mounting stem 13/16"-24 in diameter, 1-7/32" long. Rating at 12V: 10 amps." Max Panel Thickness: 1'', Boot: No, Pkg.: Retail Sold: Each
|
|
462-354-4203901 One circuit, normally off, two positions: Off/On. Stamped brass. 15 amps @12VDC.
Shaft: 3/8" x 1"
Sold: Each
|
|
462-1-HO5102 "Can be used with all SeaStar systems except BayStar, Capilano and 3-line inboard systems. Includes 2 hoses. ID of 5/16". Not for use with SeaStar Pro systems." Length: 2', Box: 2 Sold: Bag
|
|
462-9-0975DP1CHR Chrome plated zinc.
Base: 1-1/8", Fastener: #6
Sold: Each
|
|
462-354-4268801 16AWG Wire size.
A: 1-1/16", B: 5/8", C: 5/16"
Sold: Each
|
|
462-38-44531 Bronze hex head. NOT TO BE USED IN POTABLE WATER SYSTEMS. Size: 2" x 1-1/2"
|
|
462-87-HERRING "Pollution-Free Naval Brass Marine Bearings
Brass sleeve with rubber oil resistant shaft. The clean bearing that cushions the shaft, installs in minutes and lasts for years
Morse Bearings are engineered to meet the toughest service requirements in corrosive and abrasive marine or industrial applications. The fluted rubber bearings surface will outlast hard surface bearings by more than 10 times. All materials meet U.S. Navy specs MIL-B-17901A CLII.
Bearing Selection: Normal design practice is to select a bearing with a length equal to 4 times the shaft diameter.
It may be acceptable to deviate from this rule when application load requirements permit the use of shorter bearing lengths. * Slimline Bearing.
Bearing area is: Bearing I.D. (shaft diameter) multiply x bearing length. Loading capability is determined by: Multiplying that bearing area x 35 psi.
Example: (RAY)-
3" shaft dia.
x 12" length
36 sq." bearing area
x 35 psi
1,260 lbs. Is bearing load capacity" Shaft: 2" dia.", OD: 2-5/8", Length: 8", Metal Wall: 1/8", Johnson Name: CALL, BF Goodrich Name: Kith Sold: Each
|
|
462-38-40161 2 X 2-1/2 Brass Pipe Nipple NOT TO BE USED IN POTABLE WATER SYSTEMS. Size: 2" dia.", Length: 2-1/2"
|
|
462-38-40162 2 X 3 Brass Pipe Nipple NOT TO BE USED IN POTABLE WATER SYSTEMS. Size: 2" dia.", Length: 3"
|
|
462-87-KINGFISH "Pollution-Free Naval Brass Marine Bearings
Brass sleeve with rubber oil resistant shaft. The clean bearing that cushions the shaft, installs in minutes and lasts for years
Morse Bearings are engineered to meet the toughest service requirements in corrosive and abrasive marine or industrial applications. The fluted rubber bearings surface will outlast hard surface bearings by more than 10 times. All materials meet U.S. Navy specs MIL-B-17901A CLII.
Bearing Selection: Normal design practice is to select a bearing with a length equal to 4 times the shaft diameter.
It may be acceptable to deviate from this rule when application load requirements permit the use of shorter bearing lengths. * Slimline Bearing.
Bearing area is: Bearing I.D. (shaft diameter) multiply x bearing length. Loading capability is determined by: Multiplying that bearing area x 35 psi.
Example: (RAY)-
3" shaft dia.
x 12" length
36 sq." bearing area
x 35 psi
1,260 lbs. Is bearing load capacity" Shaft: 2" dia.", OD: 3", Length: 8", Metal Wall: 1/8", Johnson Name: CALM*, BF Goodrich Name: Knave Sold: Each
|
|
462-38-40164 Brass Nipple 2 X 4 Red NOT TO BE USED IN POTABLE WATER SYSTEMS. Size: 2" dia.", Length: 4"
|
|
462-38-40168 2 X 6 Brass Pipe Nipple NOT TO BE USED IN POTABLE WATER SYSTEMS. Size: 2" dia.", Length: 6"
|
|
462-38-40160 2 X Close Brass Pipe Nipple NOT TO BE USED IN POTABLE WATER SYSTEMS. Size: 2" dia.", Length: Close (2)
|
|
This Part has options, please click the button below to order.
542-1222 2" Aluminum Heat Exchanger / Oil Cooler Cradle Mounting Clamp
- Center-to-center mounting hole distance: dual 5/16 bolt 3-5/16 cl
- Stainless steel strap & bolt
|
|
462-37-7010810 Cast bronze with a stainless steel handle and stem nut. Ball is chrome plated for long lasting corrosion resistance. Reinforced TFE seats and stuffing box ring.Made in U.S.A. NOT TO BE USED IN POTABLE WATER SYSTEMS. Pipe: 2" IPS Cast bronze with a stainless steel handle and stem nut. Ball is chrome plated for long lasting corrosion resistance. Reinforced TFE seats and stuffing box ring.NOT TO BE USED IN POTABLE WATER SYSTEMS.
|
|
462-34-IBV2000BSPP Patented field reversible handle allows you to select the closed position orientation (clockwise or counterclockwise) that best suits the installation. Handle has square hole to accept standard ratchet, to help reach valves in hard-to-reach locations and ease actuation of difficult to operate valves. 400 WOG rated. Stainless steel handle and hardware. Chrome plated solid brass ball (not a hollow ball). PTFE seats and seals. UL Listed for fuel or water.NOT TO BE USED IN POTABLE WATER SYSTEMS. Thread: G 2", A: 4.3", B: 9.13", C: 3.59", D: 2.17" Patented field reversible handle allows you to select the closed position orientation (clockwise or counterclockwise) that best suits the installation. Handle has square hole to accept standard ratchet, to help reach valves in hard-to-reach locations and ease actuation of difficult to operate valves. 400 WOG rated. Stainless steel handle and hardware. Chrome plated solid brass ball (not a hollow ball). PTFE seats and seals. UL Listed for fuel or water. 1-1/4" and larger valves include a zerk fitting for easy lubrication or draining.
|
|
462-9-0805009PLB Ball valve design. Cast bronze. Meets needs of applications that require long, scoop or flush type thru-hulls. NOT TO BE USED IN POTABLE WATER SYSTEMS. Pipe: 2" IPS, Height: 5-3/4", Flange: 5-3/4" dia. Ball valve design. Cast bronze. Meets needs of applications that require long, scoop or flush type thru-hulls. UL Listed. NOT TO BE USED IN POTABLE WATER SYSTEMS.
|
|
462-232-CB2 Provides a fully open area to pass wiring and cables through and when rigging is complete. Constructed of rugged black vinyl that resists UV rays, gasoline and oil. Description: 2" Cable Boot, Pack: Bulk
|
|
462-9-0956DP2CHR Chrome plated cast bronze.
Size: 2", Fastener: #6
Sold: Each
|
|
