462-34-SC1000L Bronze NOT TO BE USED IN POTABLE WATER SYSTEMS. Size: 5-1/4" x 3-5/8", Max Thru-Hull: 1", Fastener: 6-#10, Case: 2
|
|
462-34-ARG1003 For the ARG series strainers. Maximum psi is 50. Maximum temperature is 225° F. Sight glass includes drain wingnut. Description: Sight Glass, Fits: ARG-1000, Size: 4-1/2" x 5-3/4" Sold: Each
|
|
462-34-ARG1253 For the ARG series strainers. Maximum psi is 50. Maximum temperature is 225° F. Sight glass includes drain wingnut. Description: Sight Glass, Fits: ARG-1250, Size: 4-1/2" x 7-3/4" Sold: Each
|
|
462-34-ARG753 For the ARG series strainers. Maximum psi is 50. Maximum temperature is 225° F. Sight glass includes drain wingnut. Description: Sight Glass, Fits: ARG-750, Size: 3-1/2" x 6" Sold: Each
|
|
462-34-ARG503 For the ARG series strainers. Maximum psi is 50. Maximum temperature is 225° F. Sight glass includes drain wingnut. Description: Sight Glass, Fits: ARG-500, Size: 3-1/2" x 4" Sold: Each
|
|
462-34-SPO60N12V "Delrin impeller and blades are not affected by diesel fuel or crankcase oil. Self-priming to 24". Mounts in any position in dry location. Motor not waterproof. 1/2" NPT threaded ports. Use 1/2" minimum or 5/8" for oil minimum reinforced hose. For pumping water amps/fuse is 7/15, and wire size is #12 up to 40'. For pumping oil amps/fuse is -17/30 and wire size is #8 up to 40'. NOT TO BE USED IN POTABLE WATER SYSTEMS." GPM: 7.0 for water - 4.5 for oil (Non-Reversing), Volts: 12
|
|
462-34-SPO60R12V "Delrin impeller and blades are not affected by diesel fuel or crankcase oil. Self-priming to 24". Mounts in any position in dry location. Motor not waterproof. 1/2" NPT threaded ports. Use 1/2" minimum or 5/8" for oil minimum reinforced hose. For pumping water amps/fuse is 7/15, and wire size is #12 up to 40'. For pumping oil amps/fuse is -17/30 and wire size is #8 up to 40'. NOT TO BE USED IN POTABLE WATER SYSTEMS." GPM: 7.0 for water - 4.5 for oil (Reversing), Volts: 12
|
|
462-34-SSC2000 Allows instant emergency bilge pumping, or to simplify winterization and cooling system flushing. While the engine is running, close the seacock and remove the quick release plug. Includes service adaptor. Hose: 2" I.D.", Pipe: 2" NPT", Length: 5.20" Sold: Each
|
|
462-34-STH1000W Includes locking nut. NOT TO BE USED IN POTABLE WATER SYSTEMS. Thread: 1", A: 2.85", B: 1.05", C: 4.00", D: 3.05"
|
|
462-34-STH2000W Includes locking nut. NOT TO BE USED IN POTABLE WATER SYSTEMS. Thread: 2", A: 3.60", B: 1.50", C: 5.75", D: 4.00"
|
|
462-34-STH2500W Includes locking nut. NOT TO BE USED IN POTABLE WATER SYSTEMS. Thread: 2 1/2", A: 3.20", B: 2.25", C: 7.85", D: 5.85"
|
|
462-34-STH500W Includes locking nut. NOT TO BE USED IN POTABLE WATER SYSTEMS. Thread: 1/2", A: 2.20", B: 1.05", C: 3.28", D: 2.55"
|
|
462-34-STH750W Includes locking nut. NOT TO BE USED IN POTABLE WATER SYSTEMS. Thread: 3/4", A: 2.20", B: 1.05", C: 4.00", D: 3.05"
|
|
462-34-STH1250W Includes locking nut. NOT TO BE USED IN POTABLE WATER SYSTEMS. Thread: 1 1/4", A: 2.90", B: 1.20", C: 4.30", D: 3.35"
|
|
462-34-STH1500W Includes locking nut. NOT TO BE USED IN POTABLE WATER SYSTEMS. Thread: 1 1/2", A: 3.15", B: 1.30", C: 4.38", D: 3.50"
|
|
462-34-SA1 Groco service kit for SA500 and SA750 strainers. Includes (2) #9R gaskets, S-64-A gasket and 500-K washer Fits: SA-500 & 750 Sold: Each
|
|
462-34-SA2 Groco service kit for SA1000 and SA1250 strainers. Includes (2) #8R gaskets, S-751-A gasket and 500-K washer. Fits: SA-1000 & 1250 Sold: Each
|
|
462-34-SA3 Groco service kit for SA1500 thru SA3000 strainers. Includes (2) #10R gaskets, S-86-A gasket and 504-F washer. Fits: SA-1500, 2000, 2500 & 3000 Sold: Each
|
|
462-34-SVS Groco service kit for SVS series seacock/strainer combos. Includes SVS-1003 body gasket, 2-232 Cap-O-Ring gasket, 500-K wing nut gasket and (2) #8R cylinder gaskets. Fits: SVS750 / 1250 series strainers Sold: Each
|
|
462-34-SW2531 "Services deck plates or strainer caps with key holes up to 7" apart. Pins fit holes up to 5/16"."
Description: Spanner Wrench
Sold: Each
|
|
