Generic

Bronze. Mount the ring permanently. Fasten the strainer to the ring and remove as often as needed. NOT TO BE USED IN POTABLE WATER SYSTEMS.

Size: 5-1/4" x 3-5/8", Max Thru-Hull: 1", Fastener: 6-#10, Case: 2

Bronze. Mount the ring permanently. Fasten the strainer to the ring and remove as often as needed. NOT TO BE USED IN POTABLE WATER SYSTEMS.

Size: 6-41/50" x 4-7/10", Max Thru-Hull: 1-1/2", Fastener: 6-#10, Case: 2

Bronze. Mount the ring permanently. Fasten the strainer to the ring and remove as often as needed. NOT TO BE USED IN POTABLE WATER SYSTEMS.

Size: 8-1/2" x 6", Max Thru-Hull: 2-1/2", Fastener: 6-#10, Case: 2

Bronze NOT TO BE USED IN POTABLE WATER SYSTEMS.

Size: 8-1/2" x 6", Max Thru-Hull: 2-1/2", Fastener: 6-#10, Case: 2

Bronze NOT TO BE USED IN POTABLE WATER SYSTEMS.

Size: 6-13/16" x 4-11/16", Max Thru-Hull: 1-1/2", Fastener: 6-#10, Case: 2

Bronze NOT TO BE USED IN POTABLE WATER SYSTEMS.

Size: 5-1/4" x 3-5/8", Max Thru-Hull: 1", Fastener: 6-#10, Case: 2

For the ARG series strainers. Maximum psi is 50. Maximum temperature is 225° F. Sight glass includes drain wingnut.

Description: Sight Glass, Fits: ARG-750, Size: 3-1/2" x 6"

Sold: Each

For the ARG series strainers. Maximum psi is 50. Maximum temperature is 225° F. Sight glass includes drain wingnut.

Description: Sight Glass, Fits: ARG-500, Size: 3-1/2" x 4"

Sold: Each

For the ARG series strainers. Maximum psi is 50. Maximum temperature is 225° F. Sight glass includes drain wingnut.

Description: Sight Glass, Fits: ARG-1000, Size: 4-1/2" x 5-3/4"

Sold: Each

For the ARG series strainers. Maximum psi is 50. Maximum temperature is 225° F. Sight glass includes drain wingnut.

Description: Sight Glass, Fits: ARG-1250, Size: 4-1/2" x 7-3/4"

Sold: Each

"Delrin impeller and blades are not affected by diesel fuel or crankcase oil. Self-priming to 24". Mounts in any position in dry location. Motor not waterproof. 1/2" NPT threaded ports. Use 1/2" minimum or 5/8" for oil minimum reinforced hose. For pumping water amps/fuse is 7/15, and wire size is #12 up to 40'. For pumping oil amps/fuse is -17/30 and wire size is #8 up to 40'. NOT TO BE USED IN POTABLE WATER SYSTEMS."

GPM: 7.0 for water - 4.5 for oil (Non-Reversing), Volts: 12

"Delrin impeller and blades are not affected by diesel fuel or crankcase oil. Self-priming to 24". Mounts in any position in dry location. Motor not waterproof. 1/2" NPT threaded ports. Use 1/2" minimum or 5/8" for oil minimum reinforced hose. For pumping water amps/fuse is 7/15, and wire size is #12 up to 40'. For pumping oil amps/fuse is -17/30 and wire size is #8 up to 40'. NOT TO BE USED IN POTABLE WATER SYSTEMS."

GPM: 7.0 for water - 4.5 for oil (Reversing), Volts: 12

Allows instant emergency bilge pumping, or to simplify winterization and cooling system flushing. While the engine is running, close the seacock and remove the quick release plug. Includes service adaptor.

Hose: 2" I.D.", Pipe: 2" NPT", Length: 5.20"

Sold: Each

Includes locking nut. NOT TO BE USED IN POTABLE WATER SYSTEMS.

Thread: 1", A: 2.85", B: 1.05", C: 4.00", D: 3.05"

Includes locking nut. NOT TO BE USED IN POTABLE WATER SYSTEMS.

Thread: 1 1/4", A: 2.90", B: 1.20", C: 4.30", D: 3.35"

Includes locking nut. NOT TO BE USED IN POTABLE WATER SYSTEMS.

Thread: 1 1/2", A: 3.15", B: 1.30", C: 4.38", D: 3.50"

Includes locking nut. NOT TO BE USED IN POTABLE WATER SYSTEMS.

Thread: 2", A: 3.60", B: 1.50", C: 5.75", D: 4.00"

Includes locking nut. NOT TO BE USED IN POTABLE WATER SYSTEMS.

Thread: 2 1/2", A: 3.20", B: 2.25", C: 7.85", D: 5.85"

Includes locking nut. NOT TO BE USED IN POTABLE WATER SYSTEMS.

Thread: 1/2", A: 2.20", B: 1.05", C: 3.28", D: 2.55"

Includes locking nut. NOT TO BE USED IN POTABLE WATER SYSTEMS.

Thread: 3/4", A: 2.20", B: 1.05", C: 4.00", D: 3.05"