Generic

• Original equipment on many late model applications


• Iridium at the fine-wire center electrode and platinum at the ground electrode provides maximum durability and performance


• The platinum at the ground electrode adds extra protection against plug wear and gap erosion


• Sold in standard pack only

• Original equipment on many late model applications


• Iridium at the fine-wire center electrode and platinum at the ground electrode provides maximum durability and performance


• The platinum at the ground electrode adds extra protection against plug wear and gap erosion

Model #: 7692, Pack: 4

Sold: Each

• Original equipment on many late model applications


• Iridium at the fine-wire center electrode and platinum at the ground electrode provides maximum durability and performance


• The platinum at the ground electrode adds extra protection against plug wear and gap erosion


• Sold in standard pack only

• Original equipment on many late model applications


• Iridium at the fine-wire center electrode and platinum at the ground electrode provides maximum durability and performance


• The platinum at the ground electrode adds extra protection against plug wear and gap erosion

Model #: 3653, Pack: 4

Sold: Each

• Original equipment on many late model applications


• Iridium at the fine-wire center electrode and platinum at the ground electrode provides maximum durability and performance


• The platinum at the ground electrode adds extra protection against plug wear and gap erosion


• Sold in standard pack only

• Original equipment on many late model applications


• Iridium at the fine-wire center electrode and platinum at the ground electrode provides maximum durability and performance


• The platinum at the ground electrode adds extra protection against plug wear and gap erosion

Model #: 6966, Pack: 4

Sold: Each

• Original equipment on many late model applications


• Iridium at the fine-wire center electrode and platinum at the ground electrode provides maximum durability and performance


• The platinum at the ground electrode adds extra protection against plug wear and gap erosion


• Sold in standard pack only

• Original equipment on many late model applications


• Iridium at the fine-wire center electrode and platinum at the ground electrode provides maximum durability and performance


• The platinum at the ground electrode adds extra protection against plug wear and gap erosion

Model #: 6289, Pack: 4

Sold: Each

Description: Latch Dog Assembly

Sold: Each

Latch Dog Assembly

Description: Latch Dog Assembly

Sold: Each

Made of marine grade polymer or stainless steel.

• Supplied with multiple backing plates to fit any door thickness .075" to .875" thick


• Locking models supplied with set of keys


• Easy two bolt installation


• Locking and Non-Locking latches available


• Fits standard 2 Inch hole cutout

Size: 2-3/8" dia.", Type: Locking, Color: Black

Sold: Each

Made of marine grade polymer or stainless steel.

• Supplied with multiple backing plates to fit any door thickness .075" to .875" thick


• Locking models supplied with set of keys


• Easy two bolt installation


• Locking and Non-Locking latches available


• Fits standard 2 Inch hole cutout

Size: 2-3/8" dia.", Type: Non-Locking, Color: Black

Sold: Each

"Low profile. Fits up to 3/4" door. Chrome."

:

Sold: Each

Non-corrosive, UV resistant. Hardware is concealed when latched. Latch reduces vibration. Used on motorboxes, doors, and other closures. Stainless hardware, OEM approved.

:

Sold: Each

"Designed to provide high performance, trouble free use in the most hostile conditions. The latches and all shafts and tongues are made from polished, cast 316 stainless steel. Round design enhances any marine craft. Latches can be installed vertically or horizontally, making them ideal for any opening. The Latch-tite™ series is for applications that require heavy-duty, high performance construction and a high quality appearance.

• Unique patented stainless steel shaft with bushing and twin Nitrile "O" rings for greater protection against water penetration
• Over center anti-rattle handles provide quiet operation
• Concealed fasteners

Size: 3", Fastener: #8

Sold: Each

Cleans, polishes, preserves. Recommended for use on leather and vinyl automotive, marine, aeronautical and household upholstery. Not recommended for suede or buck.

Description: Leather & Vinyl Wax, Size: Pint, Case: 12

Sold: Each

Two high power Cree LED bulbs provide 1300 Lux light output from the front array, with a focused beam angle of 10° for a concentrated light beam. Six regular LED bulbs on the top array have a wide angle beam of 90° to illuminate a large portion of the dock area. Surface mount with a small footprint makes for easy installation, and these lights are waterproof with an IP rating of 68. Front lights and top lights can be controlled separately. Stamped 304 stainless. Lumens 300. Amp Draw .28@12V. Fastener#8 RH.

A: " 3-9/16", B: 2-5/8", Pack: 1 pr.

Sold: Pack

USCG certified for use on power driven vessels under 20 meters (65.6 ft.) in length. 2-mile visibility. Available in chrome plated bronze or white epoxy coated bronze. Uses 10% of the energy draw of standard lights. Low heat, long life and water resistant. Vertical mount. Screw size is 8.

Housing: White, Size: 3-1/4" L x 2" W x 1-1/8" H ", Volts: 12, Pack: 2

Sold: Box

These LED lights exceed the output of comparable halogen lights while using 20% of the power. Lights stay cool to the touch and eliminate the burn hazard that halogen lighting can present. Fully potted electronics and stainless steel housing allow for interior and exterior mounting - even underwater! Rated for 50,000+ hours of life. For 12 VDC systems. 1.5 watts at 12 VDC.

Aside from efficiency and performance, Attwood's underwater light is unmatched in ease of installation. Today's underwater lighting products are extremely heavy, require a large thru-hull cut below the water line and involve several additional steps for installation. With only a small hole for wiring and 2 screws for attachment, Attwood's LED surface mount design makes installation as quick and effortless as possible.

Backed by a 10-year warranty, Attwood's LED underwater light is designed with the most extreme conditions in mind. Attwood uses only the highest grade stainless components to ensure the product will be resistant to corrosion. To ensure the light is watertight, all electrical components are fully sealed with a proprietary potting compound. These features translate into a lighting product that the customer will likely never have to replace or service as long as they own their boat!

• Fully potted electronics and stainless steel housing allow for interior and exterior mounting-even underwater!
• Rated for 50,000+ hours of life
• For 12 VDC systems. 1.5 Watts @ 12V.

LED Color: White, Mount: Horizontal, Size: 3" L x 3/4" W

Grommet mount LED lights with 10 diodes are waterproof and meet FMVSS/CMVSS 108 requirements. Approved for vertical or horizontal mounting. Grommet, 3-prong wiring pigtail and 11 gauge steel mounting bracket available separately. 6.42" x 2.28" x 1".

Description: White Backup Light

Grommet mount LED lights with 10 diodes are waterproof and meet FMVSS/CMVSS 108 requirements. Approved for vertical or horizontal mounting. Grommet, 3-prong wiring pigtail and 11 gauge steel mounting bracket available separately. 6.42" x 2.28" x 1".

Description: Red Stop/Tail/Turn Light

Grommet mount LED lights with 10 diodes are waterproof and meet FMVSS/CMVSS 108 requirements. Approved for vertical or horizontal mounting. Grommet, 3-prong wiring pigtail and 11 gauge steel mounting bracket available separately. 6.42" x 2.28" x 1".

Description: Amber Turn Light

Injection molded polycarbonate. 360° all around lghts are approved for USCG 2 NM. #12 RH fastener.

A: 4-5/16", B: 1-1/8", C: 2-1/4"

Sold: Each

LED Color: Blue or White