Generic

"LED Drink Holder has three LED's. Dual purpose design allows the use of beverage cans with or without insulated can wraps, as well as most sizes of bottles. The bottom is padded with a rubber insert to prevent rattling, and the drain fitting allows water to be drained into the bilge - use 1/4" tubing secured with a tie-wrap. 12 volt DC. Stamped 304 stainless."

LEDs: 3 Blue, Size: " 4-3/8" ? 3-3/16", Hole: 3-3/4"

"Injection molded nylon and aluminum. Approved for USCG 2 NM. Mounts on 1-1/4" square tubing. #10 FH fastener."

A: 24", B: 2-7/8", C: 3-3/8"

Sold: Each

"Injection molded nylon and aluminum. Approved for USCG 2 NM. Mounts on 1-1/4" square tubing. #10 FH fastener."

A: 9", B: 2-7/8", C: 3-3/8"

Sold: Each

LED G4 bulb is designed for interior use only. 12V, 60 mA.

LEDs: 14, A: 1-1/4", B: 7/8", Watts: 0.7, Case: 5

Sold: Each

"A 7-diode, LED oval stop, turn and tail light suitable for over-80" vehicle width applications. It uses the industry-standard PL3 socket that is integrated into the housing. 9-16 volt operating range. Meets FMVSS 108 requirements in horizontal, vertical or any 360 degree position.
Includes light, grommet & pigtail."

Size: 6-1/2" w/o Grommet"

Sold: Each

Lens: Amber, Volts: 12 /24V DC

Lens: Green, Volts: 12 /24V DC

Lens: Green, Volts: 120V AC

Lens: Red, Volts: 120V AC

Lens: Red, Volts: 12 /24V DC

"Hellamarine 3" round LED UV resistant courtesy lamps can be installed almost anywhere onboard. Advanced lens technology provides a cool, even spread of soft light while consuming less than .5W, a fraction of the energy of traditional bulbs. Each lamp is completely sealed, highly shock, impact and vibration resistant and run extremely cool for safer installations where the heat of an incandescent lamp may cause damage. Flush mount installations require a 2" cutout. Flush/Surface mount models include an adapter ring for surface mount applications."

Size: 3", Bezel: White, LED Color: White, Mount: Flush or Surface, Volts: 12

Sold: Each

"Designed to take advantage of LED technology; 100,000 hour service life, reduced consumption, no bulbs to change.
8" x 2-7/8" x 2-3/4"."

Description: LED tail light, 8-Function, Left/Roadside

Sold: Each

"Designed to take advantage of LED technology; 100,000 hour service life, reduced consumption, no bulbs to change.
8" x 2-7/8" x 2-3/4"."

Description: LED tail light 7-Function, Right/Curbside

Sold: Each

"Low profile, waterproof lights designed specifically for harsh marine conditions. Packaged set includes: two LED over 80" tail lights and mounting hardware for quick and easy upgrade to LED. Contents: (1) STL-16RB, (1) STL-17RB and stainless steel mounting hardware. Lifetime LED Warranty."

Description: LED Set

Sold: Pack

"Designed to take advantage of LED technology; 100,000 hour service life, reduced consumption, no bulbs to change.
Kit includes: 2 low profile tail lights, 25' trailer wiring harness cable with molded 4-way plug, 4' four-wire car wiring harness cable with molded 4-way plug and license plate bracket.
8" x 2-7/8" x 2-3/4"."

:

Sold: Each

Rated at 200 lumens. Low amp draw. Built-in on/off switch, just press on center of lens. Draws less than 0.2 amps.

Finish: Satin, LEDs: 12, LED Color: White, A: 3 3/8", B: 2 5/8", C: 9/32"

Highly efficient, the LED T-top light offers long 100,000-hour operating life with virtually no drain on batteries. It's generous 18' of safe, shielded cable is ideal for use on tops, bridges and towers of all sizes. Polished anodized housing is pre-drilled for easy hook-up and is an attractive addition to any top.

Size: 2" x 20", Volts: 12/24 Colors: Blue or Red

Injection molded polycarbonate. 225° light approved for USCG 2 NM. #12 RH fastener.

A: 4-5/16", B: 2-1/4", C: 1-1/8"

Sold: Each

Compact, surface mount design in amber or red for clearance, side marker or identification light. Features sonically sealed, waterproof lens and housing in a single unit. Includes both lead and ground wire for mounting to all surfaces. .046 Amps. Lifetime LED Warranty.

Lens: Amber - 2 Diodes, Size: 2-1/2" L x 1-1/16" H", Pkg.: Polypack, Case: 20

Sold: Each

Compact, surface mount design in amber or red for clearance, side marker or identification light. Features sonically sealed, waterproof lens and housing in a single unit. Includes both lead and ground wire for mounting to all surfaces. .046 Amps. Lifetime LED Warranty.

Lens: Red - 2 Diodes, Size: 2-1/2" L x 1-1/16" H", Pkg.: Polypack, Case: 20

Sold: Each