Generic

Tube: 15/16", A: 10", B: 7-7/8", C: 2-1/2", Color: Blue, Fastener: 5/16"-18 Nut

Tube: 15/16", A: 13", B: 10-7/8", C: 2-1/2", Color: Blue, Fastener: 5/16"-18 Nut

Cabinet light has 4 super bright LED's and its small size allows it to be mounted (stainless steel mounting screws included) in any cabinet, locker, or other places where short access lighting is needed. The light is battery powered and uses 6 LR44 batteries (included), so no wiring is necessary. Injection molded nylon.

LED Color: White, C: 13/16", Fastener: #10 FH

Sold: Each

LED T/L OVAL 6" STOP/TAIL/TURN

Wesbar Waterproof LED Oval Taillights feature 10 diodes and are available with a variety of mounting options. The universal mount has an amber lens, while the vertical and horizontal mounts are They meet FMVSS/CMVSS 108 requirements

• Size: 6-1/2" x 2-5/16" x 7/8"
• Functions: Stop/tail/turn

Injection molded nylon and aluminum. Approved for USCG 2NM (Colreg 2 mile). 12V DC.

A: 48", B: 24", C: 1-5/16", D: 1-3/16"

Sold: Each

Stamped 304 stainless steel. Approved for USCG 2 nautical miles. Use 2 #10 RH fasteners. Includes both port and starboard lights.

Size: 2-9/16" L x 2-1/4" x 1" H", Pack: 1 pr.

Sold: Pack

Long life, low power consumption LED's are mounted in a waterproof, non-corrosive molded black polymer housing with removable brackets which can be mounted vertically or horizontally. Trim tab mounting allows you to adjust the beam as the tab moves up and down. Mounting riser included for tabs with a lip on them. Includes 8' of 18 AWG marine grade wire. 12V, 7 watts.

LED Colors: Blue or White, Size: 4-1/8" x 1-5/16" x 1-1/4"

Injection molded Delrin

A: 2 3/16", B: 1 3/4", C: 1 9/16", D: 11/16", LED Color: White

Injection molded Delrin

A: 2 3/16", B: 1 3/4", C: 1 9/16", D: 11/16", LED Color: White

Sold: Each

Injection molded Delrin

A: 2 3/16", B: 1 3/4", C: 1 9/16", D: 11/16", LED Color: Blue

Sold: Each

Injection molded Delrin

A: 2 3/16", B: 1 3/4", C: 1 9/16", D: 11/16", LED Color: Blue

Sold: Each

"2-mile, 360° visibility. For pleasure craft up to 39.4 ft (12 m).
Compact size designed for installation on a wakeboard tower, radar arch, hard top, poling platform, tuna tower, or other fixed structure. Direct LED replacement for Attwood's incandescent 5940 series.
Attwood's proprietary optics design draws only 1.8 watts at 12VDC - the lowest power draw of any 2-mile all-round light on the market today. Lights are rated for 50,000+ hours of use.

• Only draws 3 watts at 12V


• 7" wire leads


• Full sealed electronics


• 10-year warranty

• Only draws 1.8 watts at 12V


• 7" wire leads


• Full sealed electronics


• 10-year warranty

Size: 2-3/8" dia. x 1-3/4" H", Case: 3

Sold: Each

"USCG Certified for use on power driven vessels under 20 meters (65.6 ft.) in length. 2-mile visibility. White plastic top with clear fluted lens and frosted globe, and 3/4" diameter anodized aluminum tube. L.E.D.'s use less than half the energy draw of standard lights, low heat, long life. Screw size is 8."

Housing: White, Mount: Fixed, Height: 7-1/8", Base: 1" x 2-5/8"

Sold: Each

1A232 Lehman Steel Expansion Tank. Replacement for the original Ford Lehman 120 (2715E).

2C239CN Lehman 6 cyl. side mount copper nickel. Has the same configuration as Lehman 2C232.

2C240CN Lehman Heat Exchanger Side Mount, 4 Cyl. With cupro nickel (CuNi) core. Has the same configuration as Lehman 2C242.

2C242 Lehman Heat Exchanger, 4 cyl side mount (Sendure #10302-1-5) 4X11-1/8" bundle. Has the same configuration as Lehman 2C240CN.

2C246 Lehman Heat Exchanger SP185-225 Copper core.

2C251 Lehman Heat Exchanger 3" Diameter 2-Pass Peugeot.

2C251CN Lehman Heat Exchanger 3" Diameter 2-Pass Peugeot with cupro nickel (CuNi) core.