462-354-4264501 Allows the use of 12 volt power accessories on small boats without a built-in power socket. 6' cord.
:
Sold: Each
|
|
462-47-7508 Power Steering Pump Replaces: 16792A39 Sold: Each
|
|
462-47-97512
- Anti-foam additives assure uniform flow with reduced air contamination in hydraulic systems
- Designed for heavy duty use at high operating pressures in applications subject to varied temperature ranges
- Provides proper lubrication and corrosion protection for internal hydraulic components
Size: 1 qt.
|
|
This Part has options, please click the button below to order.
500-2000 Power Take Off Adapter - LS Chevy 1310 Flexplate
Uses 3/8-24 bolts on 2" x 2-3/8" centers
These flanges bolt on the flexplate and accept 1310 spicer drivelines. There are many more available, just call us. These power take offs are needed when attaching your drive shaft to your engine.
Need help choosing your new PTO flange? Check out this handy tutorial!
|
|
500-2005 Power Take Off Adapter - LS Chevy 1310 Flywheel
Uses 3/8-24 bolts on 2" x 2-3/8" centers
These flanges bolt on the flywheel and accept 1310 spicer drivelines. There are many more available, just call us. These power take offs are needed when attaching your drive shaft to your engine.
Need help choosing your new PTO flange? Check out this handy tutorial!
|
|
500-2010 Power Take Off Adapter - LS Chevy 1350 Flexplate
Uses 7/16-20 bolts on 2-3/8" x 2-7/8" centers
These flanges bolt on the flywheel or flexplate and accept 1350 spicer drivelines. There are many more available, just call us. These power take offs are needed when attaching your drive shaft to your engine.
Need help choosing your new PTO flange? Check out this handy tutorial!
|
|
500-2015 Power Take Off Adapter - LS Chevy 1350 Flywheel
Uses 7/16-20 bolts on 2-3/8" x 2-7/8" centers
These flanges bolt on the flywheel or flexplate and accept 1350 spicer drivelines. There are many more available, just call us. These power take offs are needed when attaching your drive shaft to your engine.
Need help choosing your new PTO flange? Check out this handy tutorial!
|
|
|
|
|
462-47-97500 Formulated for high operating pressure. Anti-foam additives assure uniform flow with reduced air contamination in hydraulic systems. Designed for heavy duty use at high operating pressures in applications subject to varied temperature ranges. Provides proper lubrication and corrosion protection for internal hydraulic components. Size: 10 oz., Case: 12 Sold: Each
|
|
462-47-5705 5 terminal
Single pull
Double throw
12 volt - 5 terminal
- Single pull
- Double throw
- 12 volt
Replaces: 582472, 584416, 586224 Sold: Each
|
|
462-74-28510 Exceeds OEM warranty requirements. Formulated to provide consistent, no-fade performance. Anti-foam, anti-wear, anti-oxidation and advanced stabilizing additives for optimum performance in hydraulic trim tabs, power tilt and power steering systems. Protects seals, hoses and other components from drying, cracking or corroding. Size: 10 oz., Case: 12
|
|
462-74-28532 Exceeds OEM warranty requirements. Formulated to provide consistent, no-fade performance. Anti-foam, anti-wear, anti-oxidation and advanced stabilizing additives for optimum performance in hydraulic trim tabs, power tilt and power steering systems. Protects seals, hoses and other components from drying, cracking or corroding. Size: Quart, Case: 12
|
|
462-661-2104 Features tin-plated copper bus with stainless steel hardware. The highest amperage busbar available. Ideal for main DC negative or positive bus on larger boats.
Gang: 4, Stud: 3/8"-16", Terminal Screw: #8-32
Sold: Each
|
|
462-661-2107 Features tin-plated copper bus with stainless steel hardware. The highest amperage busbar available. Ideal for main DC negative or positive bus on larger boats. Gang: 8, Stud: 3/8"-16, Terminal Screw: #8-32
|
|
464-2020 Powerbar Busbar Dual Stud 3/8"
The Blue Sea Systems PowerBar Common BusBar without Insulators provides compact high ampere busing with 3/8" terminal studs.
Features:
- Terminal stud: 2 x 3/8" - 16
- Continuous rating: Determined by wire amperage capacity connected to the PowerBar up to 600 Amps
- Voltage rating: 48V DC
- Mounting holes accepts #10 (M5) screws
|
|
464-2003 Powerpost Cable Connector 3/8"
The Blue Sea Systems PowerPost Cable Connectors allow for connection of several smaller size wires at high amperage cable connections.
- 3/8" x 7/8"
- Max voltage: 48V DC
- Includes insulator
|
|
464-2002 Powerpost Cable Connector 5/16"
The Blue Sea Systems PowerPost Cable Connectors allow for connection of several smaller size wires at high amperage cable connections.
Features:
- 5/16" x 7/8"
- Max voltage: 48V DC
- Includes insulator
|
|
462-661-2018 Connect high amperage cables securely. Includes insulator caps. 48 volts DC maximum.
Stud: 1- 5/16" & 1- 3/8", Size: 2.75'' x 1.25''
Sold: Each
|
|
464-2017 Powerpost Dual Connector 3/8"
The Blue Sea Systems Dual PowerPost Cable Connectors are designed to provide a termination point for extending the length of outboard harnesses and other conductors.
Features:
- Max voltage: 48V DC
- Mounting holes: Accepts #10 (M5) screws
|
|
462-313-P77736 "Retrieval speed up to 80'/minute. Free fall design is up to 6 times faster than powering down. Housing is durable aluminum with triple finish nylon coating. Exclusive stainless steel rope and chain guidance system and stainless steel drive shaft stands up to years of use. Built with durable stainless steel fasteners that resist corrosion for easy removal. Features one piece motor plate for smooth power transmission & improved gear life, heat treated, oil impregnated gear system for smoother operation and watertight seals for additional protection against corrosion. Helm operated one touch control. Replaceable rode glide smoothly channels rope & chain below deck. Overall unit dimensions are: 10-9/16" L x 7" W x 6-5/16" H."
Rating: 775 lbs., Boat Size: 36', Line Size: 1/2", Chain: 1/4" G4"
Sold: Each
|
|
