Generic

Power Assist Dual Ignition Control Kit

Description: Dual Ignition Control Kit

Sold: Each

The SeaStar Power Assist unit virtually eliminates all steering loads on the wheel and reduces steering effort in heavy or high torque applications to reduce driver fatigue and discomfort, just like in a car. It can be installed on new SeaStar installations or as an easy retrofit to existing systems by using an electronically controlled hydraulic pump to provide on-demand power steering. If power is interrupted for any reason, the steering will return to manual operation, but will, of course, be heavier than with the Power Assist activated. Operates on 12V or 24V and can be bulkhead or deck mounted.

Features:
• Dramatically reduces steering effort
• OEM or retro-fit
• Simple add-on to an existing SeaStar steering system (from 1.4 to 2.4 SeaStar helms)
• Suitable for use with autopilots
• Wiring harness included
• Ignition protected (SAE J-1171) and ABYC, CE, NMMA, ISO 10592 Approved
• 12/24V with 15' Harness

Professional grade compound for professional detailers. Super fast cutting, low swirl compound removes sanding scratches and heavy oxidation without scouring the finish like traditional compounds. It is designed to offer speed and efficiency on Marine & RV fiberglass gel coat surfaces.

Description: Professional Grade Power Cut Compound, Size: Quart, Case: 6

Sold: Each

"Vented. Four cable openings, enlarged to .55" diameter. Large handles with rolled edges. Meet ABYC standard E-10 and USCG specification # 183.420. Polypropylene construction for total acid resistance. Mounting hardware included. Black. Small: For smaller batteries like Series 16 and those used in Jet skis and lawn equipment. Large: For larger applications. 9-3/4" maximum battery height."

Fits: Group 27, OD: 16-7/8" L x 9-5/8" W x 10-7/8" H ", Case: 3

Sold: Each

"30 Amp, 125 Volt.
Interior has easy-to-wire terminations and is transparent for quick and easy visual inspection. Mounting holes are 2-3/8" on centers. Mounting screws, gasket and protective rear enclosure is included."

Description: 316 Stainless steel

Sold: Each

"NM models feature a UV resistant white cover which make the unit weatherproof when closed.
SS models have a gasketed, self-closing cover, making it watertight when fastened.
Mounting holes on all units are 2-3/8" on center. Mounting screws and gasket are provided."

Rating: 50A/125V, Material: Stainless steel

Sold: Each

"NM models feature a UV resistant white cover which make the unit weatherproof when closed.
SS models have a gasketed, self-closing cover, making it watertight when fastened.
Mounting holes on all units are 2-3/8" on center. Mounting screws and gasket are provided."

Rating: 50A 125/250V, Material: Stainless steel

Sold: Each

Connect high amperage cables securely. Includes insulator caps. 48 volts DC maximum.

Stud: #10-32 x 5/8'', Size: 1.625'' x .832''

Sold: Each

Connect high amperage cables securely. Includes insulator caps. 48 volts DC maximum.

Stud: 1/4" x 1-1/16'', Size: 3.30'' x 1.75''

Connect high amperage cables securely. Includes insulator caps. 48 volts DC maximum. Posts have no amperage rating because amperage flows between terminals stacked on the post and is determined by the wire and terminals used.

Stud: 1/4" x 3/4'', Size: 1.625'' x .832''

Connect high amperage cables securely. Includes insulator caps. 48 volts DC maximum. Posts have no amperage rating because amperage flows between terminals stacked on the post and is determined by the wire and terminals used.

Stud: 3/8" x 7/8'', Size: 3.30'' x 1.75''

Sold: Each

Connect high amperage cables securely. Includes insulator caps. 48 volts DC maximum.

Stud: 5/16" x 7/8'', Size: 3.30'' x 1.75''

Sold: Each

Additional bus bar allows small wire connections at high amperage cable connectors. 48 volts DC maximum.8ea. #8 terminal screws. Includes insulator.

Stud: 1/4" x 1'', Size: 3.30'' x 1.75'', Max Amps: 150

Sold: Each

Additional bus bar allows small wire connections at high amperage cable connectors. 48 volts DC maximum.8ea. #8 terminal screws. Includes insulator.

Stud: 3/8" x 3/4'', Size: 3.30'' x 1.75'', Max Amps: 150

Sold: Each

Additional bus bar allows small wire connections at high amperage cable connectors. 48 volts DC maximum.8ea. #8 terminal screws. Includes insulator.

Stud: 5/16" x 3/4'', Size: 3.30'' x 1.75'', Max Amps: 150

Sold: Each

The quickest way to bleed a SeaStar^® or BayStar^® system and assure a rock-solid steering feel every time! Power Purge systems reduce installation and warranty costs while enhancing the quality of the boat for the end user. A typical manual fill and purge takes the average, experienced installer about 30 minutes per boat - by using Power Purge this can be reduced to 10 minutes or less.
Features:

• Speed, quality, and ease-of-operation


• Extended portablility for use in the field


• Convenient electrical hook-up utilizing an avail able12-volt boat battery

• Speed, quality, and ease-of-operation


• Extended portability for use in the field


• Convenient electrical hook-up utilizing an available12V boat battery

:

Sold: Each

Made from stamped brass and injection molded nylon & ABS. Maximum rating is 12 volts and 16 amps.

Description: Socket & Cap, A: 2-1/4", B: 1-1/4", C: 1-1/2", D: 1-1/16", E: 1-7/8"

Sold: Each

Made from stamped brass and injection molded nylon & ABS. Maximum rating is 12 volts and 16 amps.

Description: Plug Only, A: N/A, B: N/A, C: N/A, D: N/A, E: N/A

Sold: Each

Power Socket 12V Complete Set

Seadog 12 Volt Power Socket has a stamped brass, injection molded nylon and ABS construction.

Power Socket 12v Socket & Cap

Seadog 12 Volt Power Socket has a stamped brass, injection molded nylon and ABS construction.