Generic

"The non-mercury SuperSwitch is designed for the toughest applications. Includes marine grade 14 gauge "blocked wire," larger float for increased buoyancy, removable base for easy servicing and a reliable snap switch design. 5-Year limited warranty."

Description: w/ Fuse Holder, Size: 2-1/4" x 5" x 2", Volts: 12/24, Amps: 20

Replacement Pump Cartridge, 500 GPH

Description: Replacement motor cartridge, GPH: 500

Replacement Pump Cartridge, 800 GPH

Description: Replacement motor cartridge, GPH: 800

Replacement Pump Cartridge, 1100 GPH

Description: Replacement motor cartridge, GPH: 1100

Hose: 1-1/8" dia.

Rule-A-Matic Float Switch w/Fuse 

The Rule-A-Matic Float Switches feature a removable base for easy, convenient cleaning and servicing. The mercury-free snap switch has been tested for over one million cycles for proven durability and quality. These switches were designed especially for pumps drawing a maximum of 14 amps and are equipped with a marine grade blocked wire.

• Size: 4-1/2"L x 1-1/2"W x 2"H
• Voltage: 12V, 24V and 32V DC
• Maximum amp draw: 14

Rule-A-Matic Flt Switch w/o Fuse 

• Size: 4-1/2"L x 1-1/2"W x 2"H
• Voltage: 12V, 24V and 32V DC
• Maximum amp draw: 14

The Rule-A-Matic Float Switches feature a removable base for easy, convenient cleaning and servicing. The mercury-free snap switch has been tested for over one million cycles for proven durability and quality. These switches were designed especially for pumps drawing a maximum of 14 amps and are equipped with a marine grade blocked wire.

Rule-A-Matic Plus Float Switch 

he Rule-A-Matic Plus Float Switches are designed especially for pumps drawing a maximum of 20 amps. They have a fully integrated, impact resistant cover for lasting durability that prevents jamming and damage from debris.

Features:
• No fuse holder
• 14 gauge, marine grade wire
• Built-in tester

RuleMate Auto Bilge Pump 1100 GPH

Rule-Mate 12V Automatic Bilge Pumps feature a solid state water sensing technology that senses the dielectric constant of water. The pump will activate when the water level rises to 2-3/4" and will not turn on in the event oil enters the bilge. They do not require a separate float switch. They do feature snap-off strainers and one straight and one 90° hose fittings

• GPH: 1100
• Port Size: 1-1/8"
• Draw: 3.4A

RuleMate Auto Bilge Pump 500 GPH

• GPH: 500
• Port Size: 3/4"
• Draw: 2.0A

Rule-Mate 12V Automatic Bilge Pumps feature a solid state water sensing technology that senses the dielectric constant of water. The pump will activate when the water level rises to 2-3/4" and will not turn on in the event oil enters the bilge. They do not require a separate float switch. They do feature snap-off strainers and one straight and one 90° hose fittings.

Safe for use on fiberglass, metal and painted surfaces. No rubbing or scrubbing required. Removes rust drip stains and sprinkler rust deposits.

Description: Rust Stain Remover, Size: 22 oz. Spray, Case: 12

Sold: Each

Safe for use on fiberglass, metal and painted surfaces. No rubbing or scrubbing required. Removes rust drip stains and sprinkler rust deposits.

Description: Rust Stain Remover, Size: Gallon, Case: 4

Sold: Each

A newly designed "S" style cleat for a contemporary look. Accepts drain fitting part number 041594, 041596 and 041598 for water drainage to bilge. Stainless steel.
Size: 6-1/4" L x 1-1/2" W

Stainless steel. Transom mount.

Sold: Each

"End-fed 1/2 wave. The perfect choice for bassboats, center consoles, or any vessel where compact size is important. Chrome plated brass canister minimizes de-tuning. Sealed, tin-plated copper wire coil. Requires mount with center hole for passage of the supplied 15' RG-58 cable. PL-259 connector included. Suggested mounts: 4187, 4188-S, or 4190. The 5241R is the same as style 5240, but with a heavy-duty stainless steel whip, for extra stability at high speeds.
Stainless Steel Whip (36")."

Length: 36", Ferrule: Heavy duty, Chrome/brass ferrule

Sold: Each

Hose: 1-1/2", Flange: 2-3/4"

Hose: 1-1/8", Flange: 2"

"The S3 uses a proprietary electronic sensing technology and is engineered to operate in any bilge water mixture without failure and reduce continuous cycling. Fully sealed electronics are protected from water or chemical damage. It can be mounted on the floor of the bilge or directly to a stringer. Compatible with all competitive products with no moving parts. 5-Year warranty. 2.73" H x 3.16" W x 1.68" D."

Volts: 12, Amps: 15

Sold: Each

Application: Mercury O/B: 150 hp, 4-stroke ('12-'14), 150, 175, 200, 225, 250, 300 Verado, 4-stroke ('12-Present), 150, 175, 200, 225, 250 Optimax, 2-stroke ('13-Present)

Application: Mercury/Mariner O/B: 135, 150, 175, 200 hp, Optimax, 2 & 4-stroke ('78-'11), 225 hp, 2-stroke ('78-'95)