Generic

Ultimate Skeg Protection!

• Ideal if you're looking to protect your new skeg, repair your damaged one or just add some shine.
• 316 stainless steel construction
• Kit includes mounting hardware and instructions, allen wrench, loctite 262
• Material Thickness: 1.5 mm
• Drain hole to protect against corrosion and freeze-up

Application: Mercury/Mariner O/B: 150 Optimax, 2 & 4-stroke (2014)
Suzuki O/B: 150, 175, 200, 225 hp, 2-stroke ('86-'02) & 4-stroke ('03-'14), 250SS & 300 4-stroke ('06-'11)
Yamaha O/B: 115, 130 hp, 2-stroke ('84-'02), 150 hp, 2 & 4-stroke ('84-'14), 175, 200, 225, 250 hp, 2-stroke ('84-'02), 350 hp, 4-stroke ('09-'14)
Yamaha I/O: 3.0L thru 5.7L ('89-'93)

Ultimate Skeg Protection!

• Ideal if you're looking to protect your new skeg, repair your damaged one or just add some shine.
• 316 stainless steel construction
• Kit includes mounting hardware and instructions, allen wrench, loctite 262
• Material Thickness: 1.5 mm
• Drain hole to protect against corrosion and freeze-up

Application: Force O/B: 70, 75 hp, 2-stroke ('91-'97)
Honda O/B: 35, 40, 45, 50 hp, 90 hp, 4-stroke ('91-'14)
Mercury/Mariner O/B: 40, 50, 60 hp, 2-stroke ('86-'02)
Nissan/Tohatsu O/B: 35, 40, 50 hp, 2-stroke ('93-'10)
Suzuki O/B: 40, 50, 60, 70 hp, 4-stroke ('03-'14)
Yamaha O/B: 40-48 hp, 50-85 CV, 2-stroke ('84-'00)

SH50941P: Quick connect feature on both sides of helm allow port side helm mount without need for an adaptor. The Quick connect snap in place feature allows both cable and spent travel tube installation with no tools required. Quicker installation time, ability to insert quick connect cable in the opposite end for a port run cable. The widely accepted QC spring & hitch pin feature available on both sides of the helm.

Type: Single Safe-T QC Helm

Sold: Each

Single cable tilt helm for inboards and power-assisted stern drives.
Quick connect feature on both sides of helm allow port side helm mount without need for an adaptor. The Quick connect snap in place feature allows both cable and spent travel tube installation with no tools required. Quicker installation time, ability to insert quick connect cable in the opposite end for a port run cable. Same widely accepted QC spring & Hitch Pin feature available on both sides of the helm.

Requires SH91800P tilt mechanism to complete Tilt Steering system installation.

Safe-T-II NFB Bezel

Type: 90°

Sold: Each

Zinc plated steel. Use between trailer and vehicle to prevent separation if trailer inadvertently comes off trailer ball. Has S-hooks on both ends.

Size: 1/4" x 44-1/2" L ", Receiver: Class II

Sold: Each

Sand cast chrome plated Brass. Fastener #6 FH.

A: 3", B: 2-5/16", C: 1", D: 3/4", E: 1/4", Case: 10

Sold: Each

Dual circuitry allows kill switch to be wired for either ignition kill or magneto kill. WARNING: Test switch for proper function before each use. Replace lanyard if worn, cut or frayed.

Description: Switch w/lanyard, A: 7/16", B: 5/8"

Sold: Each

Made of stamped brass and molded nylon. Circuit is normally closed (complete) with lanyard clip in place on switch. When lanyard is pulled and clip is removed from switch, circuit is open (not complete), resulting in interruption of current to ignition and shutting off engine. Gray Cap.

A: 5/8", B: 5/8"

Sold: Each

Safetyhub 100 Fuse Block

• Sealed cover protects fuses from the harsh marine environment: IP66 rating


• Ignition protected fusing meets Coast Guard & ABYC requirements for installation on gas or diesel powered boats


• Meets ISO 8846 ignition protection, and SAE J1171 external ignition protection requirements

Size: 5.75" L x 3.9" W x 2.21" H"

Sold: Each

"Black graphics on a tan dial background light red at night. Very low profile bezels follow the curve of the lens to eliminate water "trapping". Pointers are black with a fire-orange tip. Perimeter and through-dial lighting is provided for night visibility. Black bezel. Set includes Tach, Speedo, Voltmeter & Fuel gauge."

Type: 4 Gauge Outboard Set - Tach (to 7,000 rpm), Speedometer (to 65 mph), Voltmeter (12V systems), Fuel (requires tank w/ 240-33 ohm sender), Sender Code: F

Sold: Each

"Includes a 36" length of 16-gauge tinned, caulked copper wire. Permanent-magnet motor, stainless steel shaft, and steel-reinforced seal assure powerful, durable performance. Mercury-free design. All models are 5-1/2" L (not including hose nipple) 3-1/4" W x 4" H. 3-Year Warranty."

GPH: 500, Hose: 3/4" I.D.", Volts: 12, Amps: 1.2, Pkg.: Clam

"Black graphics on a tan dial background light red at night. Very low profile bezels follow the curve of the lens to eliminate water "trapping". Pointers are black with a fire-orange tip. Perimeter and through-dial lighting is provided for night visibility. Black bezel. Requires C, D, F senders. Contains:
59703P Tachometer
59704P Speedometer w/Pitot Tube
59707P Fuel Gauge
59706P Water Temperature Gauge
59705P Oil Pressure Gauge
59708P Voltmeter"

Type: Inboard/Sterndrive 6 Gauge Set: Tach (to 7,000 rpm), Speedo (to 65 mph), Voltmeter (12V systems), Fuel gauge, Water temp, Oil pressure 0-80psi, Sender Code: C, D, F

Sold: Each

"Includes a 36" length of 16-gauge tinned, caulked copper wire. Permanent-magnet motor, stainless steel shaft, and steel-reinforced seal assure powerful, durable performance. Mercury-free design. All models are 5-1/2" L (not including hose nipple) 3-1/4" W x 4" H. 3-Year Warranty."

GPH: 750, Hose: 3/4" I.D.", Volts: 12, Amps: 2.5, Pkg.: Clam

"Black graphics on a tan dial background light red at night. Very low profile bezels follow the curve of the lens to eliminate water "trapping". Pointers are black with a fire-orange tip. Perimeter and through-dial lighting is provided for night visibility. Black bezel."

Size: 2", Type: Fuel Gauge, Dial Range: E-1/2-F, Sender Code: F

Sold: Each

"Black graphics on a tan dial background light red at night. Very low profile bezels follow the curve of the lens to eliminate water "trapping". Pointers are black with a fire-orange tip. Perimeter and through-dial lighting is provided for night visibility. Black bezel."

Size: 2", Type: Oil Pressure, Electrical, Dial Range: 0-80 psi, Sender Code: C

Sold: Each

"Black graphics on a tan dial background light red at night. Very low profile bezels follow the curve of the lens to eliminate water "trapping". Pointers are black with a fire-orange tip. Perimeter and through-dial lighting is provided for night visibility. Black bezel."

Size: 3", Type: Tach, Elect, Outboard & 4-Stroke Gas, Dial Range: 0-7000 rpm, Sender Code: O/B Alt or Coil

Sold: Each

"Black graphics on a tan dial background light red at night. Very low profile bezels follow the curve of the lens to eliminate water "trapping". Pointers are black with a fire-orange tip. Perimeter and through-dial lighting is provided for night visibility. Black bezel."

Size: 2", Type: Trim, Mariner/Merc, Volvo DP/SX, Yamaha 2001 & on, Dial Range: Up-Down, Sender Code: Engine Mfr. Supply

Sold: Each

"Black graphics on a tan dial background light red at night. Very low profile bezels follow the curve of the lens to eliminate water "trapping". Pointers are black with a fire-orange tip. Perimeter and through-dial lighting is provided for night visibility. Black bezel."

Size: 2", Type: Voltmeter 12 Volt, Dial Range: 8-18 VDC, Sender Code: N/R

Sold: Each

"Black graphics on a tan dial background light red at night. Very low profile bezels follow the curve of the lens to eliminate water "trapping". Pointers are black with a fire-orange tip. Perimeter and through-dial lighting is provided for night visibility. Black bezel."

Size: 2", Type: Water Temperature, Electric, Dial Range: 120-240 F, Sender Code: D

Sold: Each