Generic

"Lights through tip of handle. Non-corrosive plastic construction. Illuminates white when panel lights are ON, changes to red when switch is ON. Brass blade terminals, silver contacts. 15/32" L x 15/32" -32 mounting stem. Rated: 20 amps @ 12 VDC. On in parenthesis (On) indicates a momentary position."

Positions: On/Off/(On), Terminals: 5 Blade, Type: SPDT, Pkg.: Retail

Sold: Each

"For applications such as starters, bilge pumps, horns, wipers and engine controls where switching, in addition to circuit protection is required. All panel switches mount in Blue-Sea A series breaker panels. Supplied with mounting adapter for standard 5/8" circuit breaker mounting hole. Nickel-plated brass and phenolic non-corrosive construction. White actuator. Rated 15A @ 32V DC or 125V AC, 10A @ 250V AC. 1/4" Tab terminals. On in parenthesis (On) indicates a momentary position."

Description: Toggle, Positions: 3 - On/Off/On, Type: SPDT

Sold: Each

"For applications such as starters, bilge pumps, horns, wipers and engine controls where switching, in addition to circuit protection is required. All panel switches mount in Blue-Sea A series breaker panels. Supplied with mounting adapter for standard 5/8" circuit breaker mounting hole. Nickel-plated brass and phenolic non-corrosive construction. White actuator. Rated 15A @ 32V DC or 125V AC, 10A @ 250V AC. 1/4" Tab terminals. On in parenthesis (On) indicates a momentary position."

Description: Toggle, Positions: 2 - Off/ (On), Type: SPST

Sold: Each

"For applications such as starters, bilge pumps, horns, wipers and engine controls where switching, in addition to circuit protection is required. All panel switches mount in Blue-Sea A series breaker panels. Supplied with mounting adapter for standard 5/8" circuit breaker mounting hole. Nickel-plated brass and phenolic non-corrosive construction. White actuator. Rated 15A @ 32V DC or 125V AC, 10A @ 250V AC. 1/4" Tab terminals. On in parenthesis (On) indicates a momentary position."

Description: Toggle, Positions: 2 - Off/On, Type: SPST

Sold: Each

Drop forged steel, galvanized. Serves as an anchor shackle and mooring buoy shackle. Bulk.

Size: 5/8", Case: 5

Sold: Each

The Quick Connect system can be used by anyone to install additional outlets or to replumb your boat or recreational vehicle. Whale Quick Connect fittings offer many benefits, all ensuring a high integrity plumbing system. The pipework's flexibility enables tight bends to be formed, hence reducing both the number of fittings and time required at installation. Whale Quick Connectsemi-rigid pipework offers the integrity of metal, but the usability of plastic, and is fully tested and recommended for use with the complete range of Whale fittings.

• Unique ?Double Gripper' design provides secure lifelong pipework retention even at excessive pressures


• The innovative ?cage collet' eliminates leaks where fittings are installed close to tight bends


• Collet has internal support ring ensuring o ring seal is held in position and does not distort or leak under pressure


• High integrity single piece moulding improves the strength of the fittings


• Outer sleeve incorporates collet cover, thus preventing accidental pipework release


• Collet clips are not necessary and therefore reduce installation time


• Pipework includes measured cut marks, designed to be a visual guide to ensure that fittings are pushed fully home

• Unique 'Double Gripper' design provides secure lifelong pipework retention even at excessive pressures


• The innovative 'cage collet' eliminates leaks where fittings are installed close to tight bends


• Collet has internal support ring ensuring o ring seal is held in position and does not distort or leak under pressure


• High integrity single piece moulding improves the strength of the fittings


• Outer sleeve incorporates collet cover, thus preventing accidental pipework release


• Collet clips are not necessary and therefore reduce installation time


• Pipework includes measured cut marks, designed to be a visual guide to ensure that fittings are pushed fully home

Description: "Elbow Adapter 1/2" Female 15mm"

Sold: Each

• Available: (7) Seven
• Condition: New

Made of stainless steel and fits most popular fender sizes. The fender holders and two styles of connectors are sold separately, so you can custom configure your fender storage system without having to buy extra hardware you won't be using.

Sold: Each

SWIVEL DRINK HOLDER CHROME

The Seadog Swivel Drink Holder is a chrome plated brass beverage holder with foam insulator. The quick release bracket allows easy removal, it fits most mugs, cans, and glasses, and comes with two wall brackets and fasteners.

Die cast Manganese Bronze
A: 2-1/16", B: 1/4", C: 7/16", D: 5/16', Pack: 2

Size: 2, A: 3-5/8" , B: 1/2" , C: 3/4" , Pkg.: Card

Size: 1, A: 3-3/16" , B: 3/8" , C: 3/4" , Pkg.: Card

Size: 3, A: 4-1/2" , B: 9/16", C: 3/4" , Pkg.: Card

A: 3-1/4", B: 1/2", C: 11/16", Pkg.: Card, Case: 10

Swivel Eye Bolt Snap - Stainless Steel
A: 3-9/16", B: 5/16", C: 5/16", D: 3/4", Case: 10

"Stainless Steel Swivel Hasp. Will accept padlocks with a 5/16" bail or less. Fastener #8 FH."

A: 2-11/16", B: 2-1/16", C: 1-1/16", D: 7/8", E: 5/16"

Sold: Each

Swivel Hasp SS 2-11/16"

The Seadog Swivel Hasp has a stamped 304 stainless steel construction.

• Size: (A) 2-11/16" (B) 2-1/16" (C) 1-1/16" (D) 7/8" (E) 5/16"
• Fastener: #7 FH

Swivel Rigging Connector Only - Fits 2" ID / 2.5" OD Hose - Hose Not Included

While the rest of the world is stuck in just one spot Hardin Marine has taken on the challenge to design the freedom of movement for your outboards rigging hose connection. With more movement than ever from today's popular outboard engines when being trimmed or stored for travel the industry has been faced with kinked rigging hoses and cowling damage due to the rigid hoes connection option that has only been available until now.

Hardin new non-corrosive 2264 Delrin directional swivel hose connection provides 12 degrees of angle for hose/ tube movement and a water tight seal. With hidden non-exposed mounting hardware this unit features the ultimate in a clean smooth finish.

Attachment of the rigging hose couldn't be easier as the unit is threaded so that the rigging hose screws counter clockwise into the swivel ball connector requiring no additional hardware for hose attachment for the ultimate in finished appearance.

The 3/4" tall flange has a 5" diameter OEM factory mounting foot print. and requires a 3-3/8” hole to install with (4) #10 fasteners (NOT included). The Connector assembly measures 2-1/2" overall installed height.

This Multi angle rigging tube connector is available in a OEM black finish or with an optional polished Stainless Steel, or powder coated trim ring both individually or as a kit with rigging hose.

Swivel Rigging Connector Only - Fits Large 2.5" ID / 3" OD Hose Version - Hose Not Included

While the rest of the world is stuck in just one spot Hardin Marine has taken on the challenge to design the freedom of movement for your outboards rigging hose connection. With more movement than ever from today's popular outboard engines when being trimmed or stored for travel the industry has been faced with kinked rigging hoses and cowling damage due to the rigid hoes connection option that has only been available until now.

Hardin new non-corrosive 2264 Delrin directional swivel hose connection provides 12 degrees of angle for hose/ tube movement and a water tight seal. With hidden non-exposed mounting hardware this unit features the ultimate in a clean smooth finish.

Attachment of the rigging hose couldn't be easier as the unit is threaded so that the rigging hose screws counter clockwise into the swivel ball connector requiring no additional hardware for hose attachment for the ultimate in finished appearance.

The 1" tall flange has a 5.37" diameter mounting foot print. and requires a 4” hole to install with (4) #10 fasteners (NOT included). The Connector assembly measures 2.36" overall installed height.

This Multi angle rigging tube connector is available in a OEM black finish or with an optional polished Stainless Steel, or powder coated trim ring both individually or as a kit with rigging hose.