Generic

Size: 2, A: 3-5/8" , B: 1/2" , C: 3/4" , Pkg.: Card

Size: 1, A: 3-3/16" , B: 3/8" , C: 3/4" , Pkg.: Card

Size: 3, A: 4-1/2" , B: 9/16", C: 3/4" , Pkg.: Card

A: 3-1/4", B: 1/2", C: 11/16", Pkg.: Card, Case: 10

Swivel Eye Bolt Snap - Stainless Steel
A: 3-9/16", B: 5/16", C: 5/16", D: 3/4", Case: 10

"Stainless Steel Swivel Hasp. Will accept padlocks with a 5/16" bail or less. Fastener #8 FH."

A: 2-11/16", B: 2-1/16", C: 1-1/16", D: 7/8", E: 5/16"

Sold: Each

Swivel Hasp SS 2-11/16"

The Seadog Swivel Hasp has a stamped 304 stainless steel construction.

• Size: (A) 2-11/16" (B) 2-1/16" (C) 1-1/16" (D) 7/8" (E) 5/16"
• Fastener: #7 FH

Swivel Rigging Connector Only - Fits 2" ID / 2.5" OD Hose - Hose Not Included

While the rest of the world is stuck in just one spot Hardin Marine has taken on the challenge to design the freedom of movement for your outboards rigging hose connection. With more movement than ever from today's popular outboard engines when being trimmed or stored for travel the industry has been faced with kinked rigging hoses and cowling damage due to the rigid hoes connection option that has only been available until now.

Hardin new non-corrosive 2264 Delrin directional swivel hose connection provides 12 degrees of angle for hose/ tube movement and a water tight seal. With hidden non-exposed mounting hardware this unit features the ultimate in a clean smooth finish.

Attachment of the rigging hose couldn't be easier as the unit is threaded so that the rigging hose screws counter clockwise into the swivel ball connector requiring no additional hardware for hose attachment for the ultimate in finished appearance.

The 3/4" tall flange has a 5" diameter OEM factory mounting foot print. and requires a 3-3/8” hole to install with (4) #10 fasteners (NOT included). The Connector assembly measures 2-1/2" overall installed height.

This Multi angle rigging tube connector is available in a OEM black finish or with an optional polished Stainless Steel, or powder coated trim ring both individually or as a kit with rigging hose.

Swivel Rigging Connector Only - Fits Large 2.5" ID / 3" OD Hose Version - Hose Not Included

While the rest of the world is stuck in just one spot Hardin Marine has taken on the challenge to design the freedom of movement for your outboards rigging hose connection. With more movement than ever from today's popular outboard engines when being trimmed or stored for travel the industry has been faced with kinked rigging hoses and cowling damage due to the rigid hoes connection option that has only been available until now.

Hardin new non-corrosive 2264 Delrin directional swivel hose connection provides 12 degrees of angle for hose/ tube movement and a water tight seal. With hidden non-exposed mounting hardware this unit features the ultimate in a clean smooth finish.

Attachment of the rigging hose couldn't be easier as the unit is threaded so that the rigging hose screws counter clockwise into the swivel ball connector requiring no additional hardware for hose attachment for the ultimate in finished appearance.

The 1" tall flange has a 5.37" diameter mounting foot print. and requires a 4” hole to install with (4) #10 fasteners (NOT included). The Connector assembly measures 2.36" overall installed height.

This Multi angle rigging tube connector is available in a OEM black finish or with an optional polished Stainless Steel, or powder coated trim ring both individually or as a kit with rigging hose.

Drop forged steel, galvanized. Serves as an anchor shackle and mooring buoy shackle. Bulk.

Size: 3/8", Case: 10

Sold: Each

Travel: 10", Mount: Bolt-on, Max Load: 1500 lbs.

Sold: Each

"Bolt-On
Retaining ring swivel
6" wheel
Clear zinc finish for corrosion protection
Mounting hardware included"

• Bolt-On


• Retaining ring swivel


• 6" wheel


• Clear zinc finish for corrosion protection


• Mounting hardware included

Max Load: 1200 lbs.

Sold: Each

"Swivel Jack stand ideal for personal watercraft and small utility trailers. Swivels up and out of the way for trailering.
3/8" pull pin
6" diameter caster
Silver powder coat finish
Mounting straps and hardware included"

• Swivel Jack stand ideal for personal watercraft and small utility trailers. Swivels up and out of the way for trailering.


• 3/8" pull pin


• 6" diameter caster


• Silver powder coat finish


• Mounting straps and hardware included

Max Load: 400 lbs.

Sold: Each

Travel: 10", Mount: Bolt-on, Max Load: 1000 lbs.

Sold: Each

Chamfered tip allows for easy adjustment. Pull to retract spring loaded tip and allow adjustment of equipment. Ideal for adjustable tubing, latches, gates and tooling.

Size: 1/4" x 1"

Sold: Each

• Pro-adjustable head, clear anodized tube
• Supports the cantilevered weight of the motor
• Stabilizes engine and steering mechanism when trailering
• Protects transoms by stabilizing engine and steering mechanism while trailering
• Adjustable toggles with replaceable rubber pads

Mount: Bolt-on, Length: 24"-36", Pkg.: Bulk

For API GL-5, MT-1 service. Superior thermal stability. Protection over a wide temperature range. Meets or exceeds OEM requirements - will not void manufacturers' warranty.

Size: Gallon, Case: 6

For API GL-5, MT-1 service. Superior thermal stability. Protection over a wide temperature range. Meets or exceeds OEM requirements - will not void manufacturers' warranty.

Size: Quart, Case: 12