Generic

"Plastic coated straps resist corrosion, while insuring a secure installation of tank. Includes:
(8 each) 22"L Tank Cradle Metal Straps
(2 each) 1/4"-20 x 3" Fully Threaded Hex Head Bolt
(8 each) 1/4"-20 x 1/2" Phillips Head Cap Screw
(10 each) 1/4"-20 Nylock Nut
(4 each) #14 x 1-1/4" Phillips Button Head Screw"

:

Sold: Each

Below deck tank mounting strips. Self-adhesive mounting strips cushion between the tank and the hull and provide room for circulation. Can be used for topside tanks as well.
Closed Cell Poly Foam Construction
Can also be used for padding with hold down straps

• Closed Cell Poly Foam Construction


• Can also be used for padding with hold down straps

Size: 2" x 30" x 1/4", Color: Black, Bag: 2

Sold: Bag

The Quick Connect system can be used by anyone to install additional outlets or to replumb your boat or recreational vehicle. Whale Quick Connect fittings offer many benefits, all ensuring a high integrity plumbing system. The pipework's flexibility enables tight bends to be formed, hence reducing both the number of fittings and time required at installation. Whale Quick Connectsemi-rigid pipework offers the integrity of metal, but the usability of plastic, and is fully tested and recommended for use with the complete range of Whale fittings.

• Unique ?Double Gripper' design provides secure lifelong pipework retention even at excessive pressures


• The innovative ?cage collet' eliminates leaks where fittings are installed close to tight bends


• Collet has internal support ring ensuring o ring seal is held in position and does not distort or leak under pressure


• High integrity single piece moulding improves the strength of the fittings


• Outer sleeve incorporates collet cover, thus preventing accidental pipework release


• Collet clips are not necessary and therefore reduce installation time


• Pipework includes measured cut marks, designed to be a visual guide to ensure that fittings are pushed fully home

• Unique 'Double Gripper' design provides secure lifelong pipework retention even at excessive pressures


• The innovative 'cage collet' eliminates leaks where fittings are installed close to tight bends


• Collet has internal support ring ensuring o ring seal is held in position and does not distort or leak under pressure


• High integrity single piece moulding improves the strength of the fittings


• Outer sleeve incorporates collet cover, thus preventing accidental pipework release


• Collet clips are not necessary and therefore reduce installation time


• Pipework includes measured cut marks, designed to be a visual guide to ensure that fittings are pushed fully home

Description: "Tap Tail Adapter 1/2" BSP Male"

Sold: Each

Seam tape with (PSA) pressure sensative adhesive.

Size: 2" x 125'

Seam tape with (PSA) pressure sensative adhesive.

Size: 4" x 125'

Hull Plate - Zinc

Size: 14" L x 1-1/4" T ", Material: Zinc

Sold: Each

Hull Plate - Zinc

Size: 9" L x 1-1/8" T ", Material: Zinc

Sold: Each

Attaches inline to your hose to improve the taste and smell of your drinking water for up to 120 days. Filters down to 150 microns. Also eliminates water spots on fiberglass when used for wash down.

Case: 6

Sold: Each

Pack: 2

Extend the life of your boat cover by preventing water from pooling on top. Includes a non-marring tip on each end of the telescoping aluminum pole and a durable plastic adjustment knob for easy height adjustment.

Length: 37"-70"

Sold: Each

This fully adjustable support pole is supplied with a male canvas snap, a grommet tip, and a plain end cap to fit any cover application. The pole is aluminum, with a durable plastic adjuster to set the correct height.

Length: 37"-70"

Sold: Each

This uniquely designed 6' x 6' square, UV treated nylon umbrella can be used on almost any vessel from a small fishing boat to larger high performance boats. It is designed to be used when anchored or at idle speed on a calm day. AnchorShade^® III offers improved design features such as stronger, larger diameter solid fiberglass structural ribs and hinge connectors. The aluminum frame is powder coated and has a 4 point locking height up to 8 feet. Adjustable straps and rubber non-skid floor end make installation flexible andf easy with no mounts or bases. Includes a heavy duty carrying case w/shoulder strap.

Colors: White, Blue, Teal, Navy, Forest Green, Sand, Black, Burgundy, Gray

Sold: Each

Used as original equipment on many walk-thru windshields. Made from anodized aluminum tubing with nylon fittings. They allow for pivot in almost every direction for easy installation.

Sizes: 11", 12", 13", 14"

Sold: Each

These fenders feature a tubular center for end-to-end line passage. Ribbed sides keep fenders in position and minimize roll. Built-in bi-valve allows you to inflate the fender to just the right pressure. Can be hung vertically or horizontally. Recommended inflation is 2 PSI. Extra soft, tough and shiny.

Size: 6" x 15", Color: White, Case: 6

These fenders feature a tubular center for end-to-end line passage. Ribbed sides keep fenders in position and minimize roll. Built-in bi-valve allows you to inflate the fender to just the right pressure. Can be hung vertically or horizontally. Recommended inflation is 2 PSI. Extra soft, tough and shiny.

Size: 8" x 20", Color: White, Case: 4

These fenders feature a tubular center for end-to-end line passage. Ribbed sides keep fenders in position and minimize roll. Built-in bi-valve allows you to inflate the fender to just the right pressure. Can be hung vertically or horizontally. Recommended inflation is 2 PSI. Extra soft, tough and shiny.

Size: 10" x 26", Color: White, Case: 2

These fenders feature a tubular center for end-to-end line passage. Ribbed sides keep fenders in position and minimize roll. Built-in bi-valve allows you to inflate the fender to just the right pressure. Can be hung vertically or horizontally. Recommended inflation is 2 PSI. Extra soft, tough and shiny.

Size: 12" x 34", Color: White, Case: 2

These fenders feature a tubular center for end-to-end line passage. Ribbed sides keep fenders in position and minimize roll. Built-in bi-valve allows you to inflate the fender to just the right pressure. Can be hung vertically or horizontally. Recommended inflation is 2 PSI. Extra soft, tough and shiny.

Size: 6" x 15", Color: Blue, Case: 6

These fenders feature a tubular center for end-to-end line passage. Ribbed sides keep fenders in position and minimize roll. Built-in bi-valve allows you to inflate the fender to just the right pressure. Can be hung vertically or horizontally. Recommended inflation is 2 PSI. Extra soft, tough and shiny.

Size: 8" x 20", Color: Blue, Case: 4

These fenders feature a tubular center for end-to-end line passage. Ribbed sides keep fenders in position and minimize roll. Built-in bi-valve allows you to inflate the fender to just the right pressure. Can be hung vertically or horizontally. Recommended inflation is 2 PSI. Extra soft, tough and shiny.

Size: 10" x 26", Color: Blue, Case: 2