Generic

• High Quality UV and Chemical Resistant Virgin Polypro


• Sized to Fit All Marine Hose

A: 2-7/8", B: 3-1/2", C: 1-3/4", D: 1-1/2", E: 2", Color: White

Sold: Each

• High Quality UV and Chemical Resistant Virgin Polypro


• Sized to Fit All Marine Hose

A: 1-7/8", B: 3-1/2", C: 1-3/4", D: 1-1/8", E: 1-3/8", Color: White

Sold: Each

These hatches provide an attractive and economical way to access horizontal or vertical storage areas. Watertight lid overlapping frame. Two separate seals on frame and lid. No visible fasteners. Corrosion-free integrated hinge. Hinges allow 180° opening.

ID: 9-5/16" x 14-3/16", OD: 12-3/4" x 17-3/4", Size: 13" x 17", Color: Polar White

Eliminates or reduces right hand steering torque caused by jacked-up transom heights and high pitched propellers. Inexpensive, simple to install and does not reduce speed. Cast aluminum construction complete with installation hardware and instructions.

:

Sold: Each

"Distributes the stress of the motor mounting bolts
High quality cast aluminum
3/8" thickness"

• Distributes the stress of the motor mounting bolts


• High quality cast aluminum


• 3/8" thickness

Description: 10" Bolt Hole Pattern"

Sold: Each

"Distributes the stress of the motor mounting bolts
High quality cast aluminum
3/8" thickness"

• Distributes the stress of the motor mounting bolts


• High quality cast aluminum


• 3/8" thickness

Description: 13" Bolt Hole Pattern"

Sold: Each

Put a trim switch or hydraulic jack plate anywhere you want with this versatile switch. The Transom Trim Control Switch provides a weatherproof tilt control system at the stern area of the boat to facilitate placing motor support in position with one person. Switch can also be used for remote adjustment of hydraulic jack plates. The switch housing is molded black plastic with raised white letters and may be mounted on any flat surface, comes with 18" pigtail wire and installation instructions.Trim switch for outboards or stern drives

• Hydraulic jack plate switch
• Puts tilt & trim control anywhere you want it
• Waterproof push button switches
• UV stable molded housing

Protects trolling motors from damage. Mounting box allows for a simple 4 screw installation in any location. Kit includes breaker, 3' of 8-Ga wire to battery, mounting box, fasteners & second ring terminal for attaching trolling motor wire.

Amps: 50

Sold: Each

Machined from 300 series stainless steel, the Troll-Tamer™ Trolling Motor Stabilizer Lock is designed to securely hold the trolling motor in place to prevent damage to the trolling motor and boat. No more worries about inadequate hold down devices, it has been designed and tested in the nastiest conditions by top touring pros.

• Prevents Damage to Trolling Motors
• Locks Motor to Deck Securely
• Locking Pin with Quick Release Toe Kick Base
• All Stainless Steel ? No Rust or Corrosion

Description: Minn Kota Fortrex Lock, Height: 2-3/4" - 4-1/2"

Molded of tough, flexible, vinyl. It is designed for multiple uses in boats, such as cable pass thru, landing net holder, fishing rod support or protector, stern light holder or any number of other uses. For bulk head pass-thru, simply mount and run cables, wires, etc. through to prevent chafing. For land nets, fishing rods, stern light or other items, simply mount and insert items to be protected or held in place. To remove items from utility grommet, simply pull. This utility grommet can be used either horizontal or vertical. Install with four (4) pan head screws (not furnished).

Hole: 2-3/8", OD: 3-3/8", Color: Black

Sold: Pack

Molded of tough, flexible, vinyl. It is designed for multiple uses in boats, such as cable pass thru, landing net holder, fishing rod support or protector, stern light holder or any number of other uses. For bulk head pass-thru, simply mount and run cables, wires, etc. through to prevent chafing. For land nets, fishing rods, stern light or other items, simply mount and insert items to be protected or held in place. To remove items from utility grommet, simply pull. This utility grommet can be used either horizontal or vertical. Install with four (4) pan head screws (not furnished).

Hole: 1-3/4", OD: 2-3/4", Color: Black

Sold: Pack

"Built with full 1/2" aluminum with an exclusive Z-Lock design for the ultimate in strength and virtually no side slippage or movement, this jack plate handles all V6 outboards up to 300hp. Easily adjustable with a single center bolt adjustment point."

Size: 6"

Lumens: 1320, LED Colors: White,Blue or Green Size: 3-1/2" x 3/4"

• Six (6) High Intensity Super Bright LEDs
• Newest Generation in LED Technology
• Stainless Steel Bezel for Beauty and Durability
• Surface Mount Installation - No Large Holes
• Resists Rust and Corrosion
• 3/8" Hole for Wire

T-HANDLE DRAIN PLUG BRASS

Seadog Snap T-Handle Drain Plugs fit 1" drains.

T-Handle Drain Plug SS

Seadog Snap T-Handle Drain Plugs fit 1" drains

• This helm can be used in a standard configuration with either the SSC134XX single cable or SSC135XX dual cable. It can also be used with the TFXtreme steering cable SSC154XX to create an HPSTM steering system.
• HPS™ Rack by Seastar Solutions is the best 4-turn way to steer a power-assisted sterndrive or outboard! Ideal for small inboards too, HPS reduces backlash (free-play at the wheel) associated with power steered boats by up to 50%!
• A great choice for ski boats, too!
• It replaces most standard Teleflex/Seastar Solutions Rack & Pinion steering without dash modifications. HPS Rack is available in single cable configuration and is for single station use only.
• Four bolts and nuts secure cable's rack housing to helm.
• Dual cable has one rack housing with two cables attached. Single helm works on both single and dual cable applications (NFB recommended for non-power assist).
• Helm/cable install as unit from back of dash
• Helm requires current generation rack cables (will not bolt up to older style cables)

Back mount single-cable rack & pinion helm. Requires separate tilt mechanism SH91800P.

:

Sold: Each

Stamped brass and molded bakelite.

Amps: 15

Circuit Breaker Thermal AC/DC 20A

Seadog Thermal AC/DC Circuit Breakers are constructed of stamped brass with bolded bakelite.

Stamped brass and molded bakelite.

Amps: 30