462-232-GFELMGB + Option(s) Designed to lessen prop noise and vibration, The Eliminator™ Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.
Will not work with Kipawa and Hydrilla Hacker Props
Colors: Black or Blue, For: Motorguide
|
|
462-232-LED5186 + Option(s) An affordable alternative for LED underwater boat lighting. These high-intensity LED underwater lights are totally waterproof and designed to be used above or below the waterline. A broad flood light effect is created by the engineered optics of the convex light face. Compared to other LED models on the market, this 600 Lumen light has greater light output and a wider aperture. Proven to attract bait fish during night trips, and add ambiance to any vessel. Stainless steel hardware included.
Lumens: 108, LED Color: White, Blue or Green, Size: 3.5" x 1.5"
|
|
462-232-JP4FADP Solid 3/8" aluminum extrusion, 3 engine mount and 2 transom mount holes, total vertical of 5-1/2" with a 4" setback. Setback: 4", Application: Max 150 hp
|
|
462-232-JP1ADP This plate is constructed of tough 3/8" aircraft aluminum and features a design that allows full tilt with dual steering. Polished finish resists corrosion. All bolts are stainless steel with brass nuts to prevent galling. Fits all V-4 and V-6 engines to a maximum of 150 hp. Provides four inches of vertical adjustment. Description: Aluminum
|
|
462-232-HFM1DP "Hot Foot adjustable slide mount allows for easy adjustment of throttle position to accommodate different drivers. With over 5" of adjustment it's the perfect solution for the family with multiple drivers. Aluminum and stainless." Description: Slide Mount Sold: Each
|
|
462-232-HT1DP Floor mounted trim control. Mounts in floor of boat under console allowing operator to trim engine with foot. Comes prewired with wiring instructions to connect it to existing trim wiring.
|
|
462-232-ILS1200DP - Prevents backwash
- Chemical resistant materials
- Thermo-plastic flapper
- Prevents backwash
- Chemical resistant materials
- Thermo-plastic flapper
Fits: 1-1/8" hose" Sold: Each
|
|
462-232-ILS1500DP - Prevents backwash
- Chemical resistant materials
- Thermo-plastic flapper
- Prevents backwash
- Chemical resistant materials
- Thermo-plastic flapper
Fits: 1-1/2" hose" Sold: Each
|
|
462-232-ILS750DP - Prevents backwash
- Chemical resistant materials
- Thermo-plastic flapper
- Prevents backwash
- Chemical resistant materials
- Thermo-plastic flapper
Fits: 3/4" hose" Sold: Each
|
|
462-232-LED51874DP "Waterproof super bright L.E.D. designed for livewells, lockers or compartments. Can be used above or below water level with through wall mounting. Impact resistant lens with wide viewing angle. Compact size mounts anywhere. Requires 1" hole, pigtail connection." LEDs: White, Volts: 12
|
|
462-232-LED51875DP "Waterproof super bright L.E.D. designed for livewells, lockers or compartments. Can be used above or below water level with through wall mounting. Impact resistant lens with wide viewing angle. Compact size mounts anywhere. Requires 1" hole, pigtail connection." LEDs: Blue, Volts: 12
|
|
462-232-LED51820DP Surface mount lights are easy to install and the tough, opaque polycarbonate lense produces a warm glow. The epoxy sealed circuit board resists water, corrosion and vibration. The LEDs have a low current draw and long life span of up to 100,000 hours. Fasteners included. Size: 2.6" x 1.3", Bezel: Chrome, LEDs: 2 Blue
|
|
462-232-LED51822DP Surface mount lights are easy to install and the tough, opaque polycarbonate lense produces a warm glow. The epoxy sealed circuit board resists water, corrosion and vibration. The LEDs have a low current draw and long life span of up to 100,000 hours. Fasteners included. Size: 2.6" x 1.3", Bezel: Chrome, LEDs: 2 White
|
|
462-232-LED51818DP Surface mount lights are easy to install and the tough, opaque polycarbonate lense produces a warm glow. The epoxy sealed circuit board resists water, corrosion and vibration. The LEDs have a low current draw and long life span of up to 100,000 hours. Fasteners included. Size: 2.6" x 1.3", Bezel: White Plastic, LEDs: 2 Red
|
|
462-232-LED51819DP Surface mount lights are easy to install and the tough, opaque polycarbonate lense produces a warm glow. The epoxy sealed circuit board resists water, corrosion and vibration. The LEDs have a low current draw and long life span of up to 100,000 hours. Fasteners included. Size: 2.6" x 1.3", Bezel: White Plastic, LEDs: 2 White
|
|
462-232-LED51876DP Great for compartments, rod lockers, gear bins, pathway or storage area. LEDs have low amp draw and long life (up to 100,000 hours. CLML Lights have a one element bulb in a snap in socket. Circuit board is completely sealed in epoxy to resist water, corrosion and vibration.
Description: Exposed Fasteners, Size: 2.25" x 2.25"
Sold: Each
|
|
462-232-LED5189 + Option(s) Great for compartments, rod lockers, gear bins, pathway or storage area. LEDs have low amp draw and long life (up to 100,000 hours. CLML Lights have a one element bulb in a snap in socket. Circuit board is completely sealed in epoxy to resist water, corrosion and vibration. Hidden fastener models provide clean, no screw-head exposed installation.
Description: Hidden Fasteners, Size: 2.25" x 2.25" Colors: Black or White
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> Use LED Flex-strip rope light under cabinets, shelving, interiors, bars, edge lit panels or any other application you can think of. The lights are super bright and consume very little power. TH Marine rope lights are encased in a waterproof sheath, can be cut to length and are water and moisture resistant. Shorter lengths include hi-strength 3M backing tape for easy mounting. Lengths over 6' do not include adhesive backing and require optional mounting channel.
Color Choices: Blue or White
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> Use LED Flex-strip rope light under cabinets, shelving, interiors, bars, edge lit panels or any other application you can think of. The lights are super bright and consume very little power. TH Marine rope lights are encased in a waterproof sheath, can be cut to length and are water and moisture resistant. Shorter lengths include hi-strength 3M backing tape for easy mounting. Lengths over 6' do not include adhesive backing and require optional mounting channel.
|
|
462-232-LED51880DP These mini utility lights use three LEDs to accent the cabin with soft light. They mount vertically or horizontally for low-profile placement on steps, companionways, under cabinets, compartments and more. Low heat, low amp draw, noncorrosive, shock-resistant and water-resistant. Stainless steel fasteners included.
Size: 2-1/8"L x 5/8"H", LEDs: 3 White
Sold: Each
|
|
