462-241-86214 ZINC PLATED
Used for mounting brackets for trailer frame. Includes flat washers and nylon nuts. A: 1/2"-13 ", B: 3-1/16", C: 3-13/16", D: 1-1/2", Pack: 1 Sold: Pack
|
|
462-241-86215 ZINC PLATED
Used for mounting brackets for trailer frame. Includes flat washers and nylon nuts. A: 1/2"-13 ", B: 2-1/16", C: 4-13/16", D: 1-1/2", Pack: 1 Sold: Pack
|
|
462-354-0812521 Forged bronze wire, chrome plated. A: 3/8" , B: 2" , C: 3-1/8" , Fastener: #10, Pack: 2 Forged bronze wire, chrome plated.
|
|
462-780-BTDT2 Size: 2" x 2', Break Strength: 1200 lbs
- Over-centering buckles
- Self padded
- Packaged in pairs
|
|
462-781-552950 The Panther Drive Bracket is made of stainless steel and is the same bracket included with the Panther Model 55-2900 Trolling Motor Tie Bar Kit. The bracket attaches directly to the most common hydraulic steering units including Uflex and can be combined with our Model 55-2400 and 55-2600 for a professional installation. It's never been easier to install a main engine to kicker tie bar kit.
|
|
462-1-HO5035 Includes bar and extension plate. For twin engines. Fits: Single Mercury (1989 to Date) Sold: Each
|
|
160-14-0737-12 Tiller Arm Bolts
|
|
160-51-0500-03 Tiller Arm Extension
|
|
160-14-1573-09 Tiller Arm Groove Pin
|
|
462-1-HA5822 SeaStar outboard steering offers three models of steering cylinders to suit most applications: Front Mount, Side Mount, and Splashwell Mount.
Front Mount cylinders are balanced and the most commonly used. They are designed for single engines to 350 hp and multiple outboard engine installations with total power to 700 hp in counter rotating applications. Before ordering, determine the best application for the boat based on hull design, speed, and usage.
Side mount cylinders are unbalanced and offer 4.8 or 5.7 turns lock-to-lock. It is suitable for shallow splashwells and use on engines fitted with power steering. For single engines to 300 hp and multiple outboard engine installations with total power to 600 hp in counter rotating applications.
Splashwell Mount cylinders are an unbalanced, light duty alternative to front & side mount with 5.5 or 6.5 turns lock-to-lock for engines with or without support tubes. For single engines to 300 hp and multiple outboard engine installations with total power to 600 hp in counter rotating applications. It can be transom or hull mounted. Description: Bolt w/Nylock Nut, Fits: HC5345 Sold: Each
|
|
462-9-1226DP0CHR "For 1/8" or 3/16" rope. The width is 11/16". Overall length is 1-1/4"." Finish: Chrome Zinc, Card: 2 Sold: Pack
|
|
|
|
|
462-354-0918141 Tiller Rope Springs, 5" 2/Card Length: 5", Compressed: 6", Pack: 2
|
|
462-354-091814 Tiller Rope Springs, 5" Bulk Length: 5", Compressed: 6", Pack: 1
|
|
462-47-6811 All NEW tilt and trim motors and assemblies
- Meets OEM specifications or late design upgrades
- 90/10 copper bushings for longer life
- High temperature epoxy armature provides strength to secure wires
- Includes harness and relays as required
- Includes heavy duty valves where applicable
All NEW tilt and trim motors and assemblies- Meets OEM specifications or late design upgrades
- 90/10 copper bushings for longer life
- High temperature epoxy armature provides strength to secure wires
- Includes harness and relays as required
- Includes heavy duty valves where applicable
Type: New, Application: Yamaha, OEM #: 62X-43880-00-00, 62X-43880-01-00, 62X-43880-09-00, 624-4380-00-00, 624-43880-00-00, 69W-43880-00-00 Sold: Each
|
|
462-47-6817 All NEW tilt and trim motors and assemblies
- Meets OEM specifications or late design upgrades
- 90/10 copper bushings for longer life
- High temperature epoxy armature provides strength to secure wires
- Includes harness and relays as required
- Includes heavy duty valves where applicable
All NEW tilt and trim motors and assemblies- Meets OEM specifications or late design upgrades
- 90/10 copper bushings for longer life
- High temperature epoxy armature provides strength to secure wires
- Includes harness and relays as required
- Includes heavy duty valves where applicable
Type: New, Application: Volvo, OEM #: 854525-3 Sold: Each
|
|
462-47-6754 Tilt & Trim Motors Application: Prestolite ETK 4102, ETK 4001, ETK 4101 (All Models 1963-77), Replaces: OMC - 382138, Prestolite - ETK 4001, ETK 4101, ETK 4102 Sold: Each
|
|
462-47-6755 Tilt & Trim Motors Application: Prestolite EVD 4001, EVD 4002 (All Models Except 2.5L, 3.0L - 1978-85), Replaces: OMC - 982058, 982706; Prestolite - EVD4001, EVD4002 Sold: Each
|
|
462-47-6758 Tilt & Trim Motors Replaces: Volvo - 850834 Sold: Each
|
|
462-47-6759 Tilt & Trim Motors Application: Newer 2 wire design for most 3, 4, 6 and 8 cyl. applications 1982 to present, Replaces: J/E - 391264, 393988, 394176, 985237 Sold: Each
|
|
