Generic

Universal trolling motor bracket for clamp-on type trolling motors. Designed for motor to be removed when boat is under engine power or being trailered. Made of cast aluminum with seasoned wood mounting block. Maximum thrust of 36 pounds.

Rating: 36 lbs Thrust

Sold: Each

TRS Tie Bar Saddle

Contains 100% Carnauba wax, U.V. sunlight inhibitors and fluorocarbon polymer resins. Stays liquid longer and can be applied to larger areas at a time. Can be applied in extreme heat without caking. One application lasts a whole season.

Description: True Wax Sealant, Size: 16 oz., Case: 12

Stainless steel trumpet tube cover fits all Sea-Dog air horns and the Max Blast electric trumpet horns. Keeps green water and bugs from getting into the trumpet tube, and snaps over the end of the tube - No tools necessary. 304 Stainless.

Size: " 3-15/16" ? 2-3/16"

Sold: Each

TSW Water Temp & Speed Sensor

Description: Temp/Speed Sensor, Model: TS W

Sold: Each

Impact-resistant and waterproof (non-submersion) the Tube light is designed & tested to withstand use in marine and other outdoor environments. TACO's T-top Tube Light makes it easy to upgrade to LED. The T-top Tube light is a great replacement light and will fit most standard florescent T-top light housings. With its sleek, finished appearance and mounting clamps (included) the Tube Light can be used as-is and easily mounted to T-tops.

Highly efficient, the LED T-top light offers long 100,000-hour operating life with virtually no drain on standard 12V batteries. Its generous 18' length of safe shielded cable is great for use on tops, bridges and towers of all sizes.

Size: 20" x 2"

Sold: Each

Impact-resistant and waterproof (non-submersion) the Tube light is designed & tested to withstand use in marine and other outdoor environments. TACO's T-top Tube Light makes it easy to upgrade to LED. The T-top Tube light is a great replacement light and will fit most standard florescent T-top light housings. With its sleek, finished appearance and mounting clamps (included) the Tube Light can be used as-is and easily mounted to T-tops.

Highly efficient, the LED T-top light offers long 100,000-hour operating life with virtually no drain on standard 12V batteries. Its generous 18' length of safe shielded cable is great for use on tops, bridges and towers of all sizes.

Size: 20" x 2"

Sold: Each

For exhaust hose, elbows, hump hose & reducers. Fire retardant/heat resistant USA made (install minimum 2' downstream from point of cooling water injection.) 200° max continuous operating temperatures.

OD: 3", Length: 4"

Sold: Each

For exhaust hose, elbows, hump hose & reducers. Fire retardant/heat resistant USA made (install minimum 2' downstream from point of cooling water injection.) 200° max continuous operating temperatures.

OD: 4", Length: 6"

Sold: Each

"Cast 316 Stainless steel.
Attaches to any 1" OD stainless tubing with two 1/4"-28 set screws (included) to create custom antenna mounts. Threaded for standard 1"-#14 threads.

Size: 2" L", Case: 5

The Quick Connect system can be used by anyone to install additional outlets or to replumb your boat or recreational vehicle. Whale Quick Connect fittings offer many benefits, all ensuring a high integrity plumbing system. The pipework's flexibility enables tight bends to be formed, hence reducing both the number of fittings and time required at installation. Whale Quick Connectsemi-rigid pipework offers the integrity of metal, but the usability of plastic, and is fully tested and recommended for use with the complete range of Whale fittings.

• Unique ?Double Gripper' design provides secure lifelong pipework retention even at excessive pressures


• The innovative ?cage collet' eliminates leaks where fittings are installed close to tight bends


• Collet has internal support ring ensuring o ring seal is held in position and does not distort or leak under pressure


• High integrity single piece moulding improves the strength of the fittings


• Outer sleeve incorporates collet cover, thus preventing accidental pipework release


• Collet clips are not necessary and therefore reduce installation time


• Pipework includes measured cut marks, designed to be a visual guide to ensure that fittings are pushed fully home

• Unique 'Double Gripper' design provides secure lifelong pipework retention even at excessive pressures


• The innovative 'cage collet' eliminates leaks where fittings are installed close to tight bends


• Collet has internal support ring ensuring o ring seal is held in position and does not distort or leak under pressure


• High integrity single piece moulding improves the strength of the fittings


• Outer sleeve incorporates collet cover, thus preventing accidental pipework release


• Collet clips are not necessary and therefore reduce installation time


• Pipework includes measured cut marks, designed to be a visual guide to ensure that fittings are pushed fully home

Description: Tube Mounting Clip 15mm

Sold: Each

"All SeaStar manual hydraulic steering systems utilize the same style of fittings for all applications. These are 3/8" compression fittings which utilize a 9/16"-24 extra fine thread."

Type: "Tube Nut 3/8", Material: Brass, Bag: 6

Sold: Bag

The Quick Connect system can be used by anyone to install additional outlets or to replumb your boat or recreational vehicle. Whale Quick Connect fittings offer many benefits, all ensuring a high integrity plumbing system. The pipework's flexibility enables tight bends to be formed, hence reducing both the number of fittings and time required at installation. Whale Quick Connectsemi-rigid pipework offers the integrity of metal, but the usability of plastic, and is fully tested and recommended for use with the complete range of Whale fittings.

• Unique ?Double Gripper' design provides secure lifelong pipework retention even at excessive pressures


• The innovative ?cage collet' eliminates leaks where fittings are installed close to tight bends


• Collet has internal support ring ensuring o ring seal is held in position and does not distort or leak under pressure


• High integrity single piece moulding improves the strength of the fittings


• Outer sleeve incorporates collet cover, thus preventing accidental pipework release


• Collet clips are not necessary and therefore reduce installation time


• Pipework includes measured cut marks, designed to be a visual guide to ensure that fittings are pushed fully home

• Unique 'Double Gripper' design provides secure lifelong pipework retention even at excessive pressures


• The innovative 'cage collet' eliminates leaks where fittings are installed close to tight bends


• Collet has internal support ring ensuring o ring seal is held in position and does not distort or leak under pressure


• High integrity single piece moulding improves the strength of the fittings


• Outer sleeve incorporates collet cover, thus preventing accidental pipework release


• Collet clips are not necessary and therefore reduce installation time


• Pipework includes measured cut marks, designed to be a visual guide to ensure that fittings are pushed fully home

Description: "Tube-Hose Connector 1/2"

Sold: Each

• Tubular stainless steel, buffed to prevent corrosion.
• Easy to mount anywhere there is access to a thru-bolt.
• Made with 2" x 5/16" studs and mounts flush with included hardware.
• Lifetime guarantee.
• Made in the USA.
• Size: 12"

Chrome spray head with water conservation button
Contains all basic shower kit parts, all hoses and wiring
Demand 2.2 gpm DC pump
Universal fitting kit
Flush mount

• Chrome spray head with water conservation button


• Contains all basic shower kit parts, all hoses and wiring


• Demand 2.2 GPM 12V pump


• Universal fitting kit


• Flush mount

:

Sold: Each

Tune up kits include cap and rotor.

Description: 4 Cylinder, Application: Crusader, Indmar, Mercruiser, OMC, Yamaha

Sold: Each

Tune up kits include cap and rotor.

Description: V-8, Application: Crusader, Indmar, Pleasurecraft, Mercruiser

Sold: Each

Includes cap and rotor.

Fits: GM V-8 engines with Delco HEI 1998 and newer (except MPI engines with 555 ECM), OEM #: Mercruiser 808483K2

Sold: Each