462-606-1340586 High temperature, EPDM rubber, polyester reinforced and exceeds SAE J20R3. Resistant to coolants, ozone, cold and heat; and serves a variety of boat and plant pressurized applications. 300 psi, Temp -40°F to 212°F. For below water line intake and discharge applications. 4 spiral. ID: 5/8", Length: 50'
|
|
|
|
|
462-47-6750 "For 1983 and later Mercruiser applications w/o "quick connect"." Description: Trim Bracket, Stainless Steel. Floor mnt., Replaces: 862548A1, 42419A1 Sold: Each
|
|
615-160-51-0208-08 Trim Cap No.5426
- Availablr: (3) Three
- Condition: not new, old stock
Jacuzzi Eagle Jet Drive Parts
|
|
160-14-1772-08 Trim Cap Bolts
|
|
160-13-0370-07 Trim Cap Gasket
|
|
462-47-6798 Replaces: 69J-43880-00-00, 60V-43880-00-00. Fits: F200, F225 (2004-06), F250 (2005-06), LF200, LF225, LF250, LZ200, LZ225, LZ250 (2004-06) : Sold: Each
|
|
462-338-PR500 Assembly allows Smart Tabs to be set in two different positions without the use of any additional tools. When the bracket handle is in the down position the Smart Tabs will function as trim tabs. When the bracket handle is in the up position they will be fully retracted. The brackets are ideal for use when rack storing a boat, beaching a tender or in very shallow water conditions for example. Note: For use with any Smart Tabs or Mobster Tabs system. : Sold: Each
|
|
462-49-NT2039 Trim ring fits N0039-10FX, N0039-10FXN, N06399-10FX, N1039-10A, N2039-10A hatches.
Description: Trim Ring. Black
Sold: Each
|
|
|
|
|
160-14-0717-08 Trim Set Screw
|
|
462-47-6241 Always check propeller clearance after installing new trim tab anodes.
Description: Magnesium , Fits: Mercruiser - 31640, 31640A1, 31640 T6, 31640Q 4.<BR>For: R/MR/Alpha One (Sterndrive & Transom Assembly '83-90) & prior drives. Honda 41107-ZW1-0032A
Sold: Each
|
|
462-47-6011 Always check propeller clearance after installing new trim tab anodes.
Fits: Honda - 41107-ZW1-003ZA,
Mercruiser - 31640A1, 31640Q 4, Material: Zinc
Sold: Each
|
|
462-377-BSMBTKIT Trim Tab Anode Kit. Includes 2 anodes w/bolts.
Description: 2 Anodes & Bolts, Pack: 2
Sold: Pack
|
|
462-622-15112101 "Airboat-specific trim tab design. 14" wide planing surface provides greater lift and less drag. The hydrodynamically designed side protrusions will not "dig in" during a hard turn which will result in a safer ride. The bent-up rear lip provides lateral strength across the entire trim tab blade. Blade is 12-gauge 304 stainless steel with 2" hinge height and 1/8" diameter hinge pin. The adjustable actuator mounting bracket on the blade allows for proper fit on many different transom angles. In the retracted position, the airboat tab is safely protected when running dry.
Airboat Trim Tab Kits contains:
1) 12-gauge 304 stainless steel trim tab plane
1) #15055-001 actuator with 6' lead & Deutsch plug
1)#30133-002 14' actuator extension wiring harness
1) #15085-001 (116) upper mounting bracket with gland seal
Owner's/installation manual & stainless steel mounting hardware
Switch sold separately (15095001)" "Airboat-specific trim tab design. 14" wide planing surface provides greater lift and less drag. The hydrodynamically designed side protrusions will not "dig in" during a hard turn which will result in a safer ride. The bent-up rear lip provides lateral strength across the entire trim tab blade. Blade is 12-gauge 304 stainless steel with 2" hinge height and 1/8" diameter hinge pin. The adjustable actuator mounting bracket on the blade allows for proper fit on many different transom angles. In the retracted position, the airboat tab is safely protected when running dry. - Airboat Trim Tab Kits contains:
- 1) 12-gauge 304 stainless steel trim tab plane
- 1) #15055-001 actuator with 6' lead & Deutsch plug
- 1)#30133-002 14' actuator extension wiring harness
- 1) #15085-001 (116) upper mounting bracket with gland seal
- Owner's/installation manual & stainless steel mounting hardware
- Switch sold separately (15095001)
" Size: 9"L x 14"W" Sold: Each
|
|
462-219-129 Decreases the time in "transition mode" between displacement and planing. Reduce fuel consumption, laboring of engine, wake and pounding. Increase speed and improve visibility and handling. - Standard kit: contains two stainless steel trim tabs, two actuators, a hydraulic power unit, all necessary wiring, tubing, hardware and installation instructions. Controls optional for standard kit
- Deluxe kit: same as standard kit but includes ES2000 control
Span x Chord: 12" x 9", Boat Size: 15'-19' Quiet, responsive & low maintenance. Decreases the time in "transition mode" between displacement and planing. Reduce fuel consumption, laboring of engine, wake and pounding. Increase speed and improve visibility and handling. 5-year warranty. - Standard kit: contains two stainless steel trim tabs, two actuators, a hydraulic power unit, all necessary wiring, tubing, hardware and installation instructions. Controls optional for standard kit
- Deluxe kit: same as standard kit but includes ES2000 control
|
|
462-255-SXTM31 "Easy operation - 1/4 turn locks & unlocks head. Can't pop open or be falsely locked. Exclusive design incorporates O-Rings and water tight cap to help seal out dirt and corrosion in the lock head mechanism. Full length solid forged lock pin can't pull out. Fits Class III trailer receivers (2" x 2")." Includes: "TC1 (1/2"- 7/8" span) and a T3: 5/8" x 2-3/4" rod", Finish: Stainless Sold: Each
|
|
462-255-TM31 "Easy operation - 1/4 turn locks & unlocks head. Can't pop open or be falsely locked. Exclusive design incorporates O-Rings and water tight cap to help seal out dirt and corrosion in the lock head mechanism. Full length solid forged lock pin can't pull out. Fits Class III trailer receivers (2" x 2")." Includes: "TC1 (1/2"- 7/8" span) coupler lock and a T3: 5/8" x 2-3/4" rod", Finish: Chrome Sold: Each
|
|
462-255-TM32 "Easy operation - 1/4 turn locks & unlocks head. Can't pop open or be falsely locked. Exclusive design incorporates O-Rings and water tight cap to help seal out dirt and corrosion in the lock head mechanism. Full length solid forged lock pin can't pull out. Fits Class III trailer receivers (2" x 2")." Includes: "TC2 (2-1/2" span) and a T3: 5/8" x 2-3/4" rod", Finish: Chrome Sold: Each
|
|
462-255-SXTM32 "Easy operation - 1/4 turn locks & unlocks head. Can't pop open or be falsely locked. Exclusive design incorporates O-Rings and water tight cap to help seal out dirt and corrosion in the lock head mechanism. Full length solid forged lock pin can't pull out. Fits Class III trailer receivers (2" x 2")." Includes: "TC2 (2-1/2" span) and a T3: 5/8" x 2-3/4" rod", Finish: Stainless Sold: Each
|
|
