Generic

"USCG Certified for use on sail or power driven vessels under 20 meters (65.6 ft.) in length. 2-mile visibility. White translucent globe and black plastic top, black plastic base, and 3/4" diameter anodized aluminum tube. Fixed mount. 12V bulb included. Screw size is 8."

Housing: Black, Height: 7-1/8", Base: 1" x 2-5/8"

Sold: Each

Low profile pump design for ease of mounting and removal in tight bilge areas, especially suited for vessels with inboard or I/O engines.
Shaft seal: lip seal
Removable cartridge style, easy to clean
Water cooled motor
Complies to ABYC, NMMA and ISO8849 marine specifications
Made in U.S.A. 3 year warranty

• Shaft seal: lip seal


• Removable cartridge style, easy to clean


• Water cooled motor


• Complies to ABYC, NMMA and ISO8849 marine specifications


• 3 year warranty

GPH: 750, Hose: 3/4", Volts: 12, Amps: 3

"Features an efficient, water-cooled motor with greater torque and less power consumption; a tough resin housing which resists shock, detergents, fuel and corrosives; a rugged impeller and a quick release bracket. 4 3/8" high. 3-Year warranty."

GPH: 750, Hose: 3/4", Volts: 12, Amps: 3

Sold: Each

PLUG, 7-WAY BLADE TO 4-FLAT

Wesbar Plug to Plug Adapters are available in a variety of combinations to fit and adapt most trailer connections. The "stubby" models are not equipped with an extension cable.

Single piece. 7 Round blade to 5 flat female adaptor conveniently links a vehicle wiring system to a trailer wiring system. Fits RV's, most new trucks, SUV's and other towing vehicles. 5-way plug fits most trailers. Compact design makes it easy to stow in glove compartment or tool box.

Description: Poly pack, Case: 25

Sold: Each

-8 AN 45° Fixed Hose End

• Available: (2) Two
• Condition: Overstock

"Are lightweight and are 1-1/2" in diameter. Structurally strong fiberglass with 1"-14 thread-upper male, lower female. Chrome-plated fittings with 4008 brass featuring brass. Use with 408R upper support bracket."

Length: 91"

"Submersible Over 80" Combination Tail Lights.
ST5RB is same as ST4RB plus license illuminator. Feature built-in rear clearance light, eliminating the need for a separate light to meet DOT requirements. Mounts on 2" centers"

• Passenger side 7-function: Stop, turn, tail, rear clearance, rear reflex, side marker, and side reflex.


• Driver side 8-function: also includes license illuminator.

Description: Left. Driver's Side w/License Illuminator, Pkg.: Polypack

Sold: Each

"Waterproof universal mount stop/turn/tail lights for over 80" applications. Features screw-on, replaceable lens and easy to change replaceable bulb. All-weather molded plastic housing and durable lens protect against corrosion. Clam packed.
7-function: Stop, turn, tail, rear clearance, rear reflex, side marker, and side reflex.
8-function: Stop, turn, tail, rear clearance, rear reflex, side marker, side reflex and license illuminator."

• Driver side 8-function: Stop, turn, tail, rear clearance, rear reflex, side marker, side reflex and license illuminator


• Passenger side 7-function: Stop, turn, tail, rear clearance, rear reflex, side marker, and side reflex

Description: 8-Function w/License illuminator, Pkg.: Polypack

Sold: Each

"Are heavy duty and constructed of high quality fiberglass. 1-1/2" diameter. Features 1"-14 thread (upper male, lower female) stainless. Requires 408R upper support bracket."

Length: 96", Mount: #409, #410

"Durable orange polyurethane. Will not mark or discolor boat. Cut and abrasion resistant. Will not "flat spot" even after months of storage. Roller is unaffected by grease, oil, gasoline, exhaust fumes, salt, etc. No bushings to pop out. Continuous bearings and reinforcing tubes on rollers over 7" long are completely enclosed in polyurethane. Shafts should be greased at installation."

Size: 8", Hole: 5/8", Reinforcing Tube: Yes, Case: 20

Sold: Each

Nickel Plated Brass. 12V, 180 mA

LEDs: 8, A: 1-3/4", B: 3/8", Watts: 30W, Candle Power: 900

Sold: Pack

6 LEDs. Nickel Plated Brass. 12V, 180 mA. All Around LED Festoon is for interior installations only.

LEDs: 8, A: 1-9/16", B: 3/8", Watts: 0.7, Case: 10

Sold: Each

"Can be used with all SeaStar systems except BayStar, Capilano and 3-line inboard systems. Includes 2 hoses. ID of 5/16". Not for use with SeaStar Pro systems."

Length: 8', Box: 2

Sold: Box

"End-fed with matching stub. An economical and lightweight, self-supporting antenna for good communications where range is not the predominant factor. Quality copper cable elements, ferrule with standard 1"-14 thread, includes 15' RG-58 cable and PL-259 connector. 6dB gain, One section. 5206C: Suggested mount: 4187 ratchet mount or use a 410 mounting kit and a 4008 extension mast to form a 16' antenna system."

Length: 8', Ferrule: Nylon

Sold: Each

Length: 8" , Base: 2-5/8" x 1-7/8", Line Size: Up To 5/8", Fastener: 1/4", Pack: 1

Scandvik has re-designed the ever popular LED Scan-Strip with newer & brighter LED technology. The SMD2835 LED provides more illumination with low power draw. Mount the LED Scan-Strip anywhere you want more illumination and better visibility, in wet or dry locations. USCG Certified Ignition Protected (SAE J1711).

LED Color: White,Blue,Red or Green  LEDs: 17, Length: 8", Volts: 12

Sold: Each

Size: 8" x 5-1/8", Max Thru-Hull: 2"

Size: 8.2" x 25", Case: 10

Size: 8.2" x 30", Case: 10