This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> Lumens: 800 Volts: 12, Amps: 0.43
- Exclusive Heat-Sync Cooling System with Active Overheat Protection
- Resistant to corrosion, chemicals, and UV Damage
- Extreme impact-resistant lens
- 3" sheathed wire
- Reverse polarity protection
- Fully-sealed waterproof electronics
- Simple installation
- Low-profile design
- CE Certified
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> Lumens: 1350, Volts: 12, Amps: 0.85
- Exclusive Heat-Sync Cooling System with Active Overheat Protection
- Resistant to corrosion, chemicals, and UV Damage
- Extreme impact-resistant lens
- 3" sheathed wire
- Reverse polarity protection
- Fully-sealed waterproof electronics
- Simple installation
- Low-profile design
- CE Certified
|
|
462-23-7533A7 Cam-action neoprene plugs snap shut to form a stopper for livewells or baitwells. Clockwise turn of the handle tightens the plug, and the lever flips down to lock. Note: Not for use with chemicals or fuels. Fits: "For 1/2" I.D. thru-hull" Sold: Each
|
|
462-23-7534A3 Cam-action neoprene plugs snap shut to form a stopper for livewells or baitwells. Clockwise turn of the handle tightens the plug, and the lever flips down to lock. Note: Not for use with chemicals or fuels. Fits: "For 5/8" I.D. thru-hull" Sold: Each
|
|
462-148-10309 "Locks the outboard motor in the forward position while trailering, greatly reducing the damaging effects of road shock. Does not "tie" engine's lower-unit to trailer, eliminating excessive pressure on hydraulic seals and unsightly scuff marks. Small compact mount can be easily stored in just about any boat compartment. Constructed of black powder-coated steel with stainless steel pins."
Fits: OMC, Bombardier '89 to present, 100 hp and up
Sold: Each
|
|
462-148-10108 "Locks the outboard motor in the forward position while trailering, greatly reducing the damaging effects of road shock. Does not "tie" engine's lower-unit to trailer, eliminating excessive pressure on hydraulic seals and unsightly scuff marks. Small compact mount can be easily stored in just about any boat compartment. Constructed of black powder-coated steel with stainless steel pins."
Fits: Mercury engines 135 OptiMax, 150 OptiMax, 175 OptiMax, 75HP-200HP EFI
Sold: Each
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> "Canted louvers deflect rain and spray and help conceal the collector box. Black ABS plastic. Installs flush to the hull with #8 screws. Use with 13411 collector box for 3" system. Dimensions: 17-9/16" L x 2-3/4" H x 1/4" D"
Colors: Black or White
Cut Out: 2" H x 15-1/4" L "
Pkg.: Poly Bag
Case: 6
Sold: Each
|
|
462-23-8812LLP2 "EPA/CARB COMPLIANT
Fuel tanks are constructed of multi-layer coextruded HDPE and EVOH. Multi-layer tanks are the most robust and durable low-permeation tanks available and meet the functional and safety requirements of the harsh marine environment. Automatic vacuum valve ensures proper fuel flow and eliminates the need for manual vent. Compatiible with 1/4" NPT fittings." Gals.: 12 w/o Gauge, Size: 24" L x 18" W x 11.6" H", Case: 1
|
|
462-23-8812LLPG2 "EPA/CARB COMPLIANT
Fuel tanks are constructed of multi-layer coextruded HDPE and EVOH. Multi-layer tanks are the most robust and durable low-permeation tanks available and meet the functional and safety requirements of the harsh marine environment. Automatic vacuum valve ensures proper fuel flow and eliminates the need for manual vent. Compatiible with 1/4" NPT fittings." Gals.: 12 w/ Gauge, Size: 24" L x 18" W x 11.6" H", Case: 1
|
|
462-23-128205 Black rubber, UV-resisitant motor well boot provides protection for control cables, wires, or fuel lines. Split side allows for installation without disconnecting controls. Includes an attachment gasket ring and ties for a secure fit. Fits: 4" dia.
|
|
462-23-99331 Aluminum painted high quality gray iron casting. Combines weight and flukes to dig in and hold firmly in sand and mud. Weight: 10 lbs., Case: 2
|
|
462-23-99341 Aluminum painted high quality gray iron casting. Combines weight and flukes to dig in and hold firmly in sand and mud. Weight: 15 lbs., Case: 2
|
|
462-23-99351 Aluminum painted high quality gray iron casting. Combines weight and flukes to dig in and hold firmly in sand and mud. Weight: 20 lbs., Case: 1
|
|
462-23-93014LP7 EPA COMPLIANT / CARB CERTIFIEDMulti layer bulb designed for high performance priming in the harsh marine environment. Multi-layer design prevents over-pressure bursting and vacuum collapse preventing proper fuel flow. Low permeation bulb prevents fuel evaporation saving gas and money. High performance check valves for quick priming and unrestricted flow ensuring proper engine performance and minimizing engine wear. Bulb is firm but not stiff like other newer EPA/CARB compliant primer bulbs. Hose: 1/4" ID EPA COMPLIANT/CARB CERTIFIEDMulti layer bulb designed for high performance priming in the harsh marine environment. Multi-layer design prevents over-pressure bursting and vacuum collapse preventing proper fuel flow. Low-permeation bulb prevents fuel evaporation saving gas and money. High performance check valves for quick priming and unrestricted flow ensuring proper engine performance and minimizing engine wear. Bulb is firm but not stiff like other newer EPA/CARB compliant primer bulbs.
|
|
462-23-5040R7 "For use on boats up to 39.4' (12 m) in length, provides 1-mile visibility. Twist/bayonet lock design secures lens and cover to base. Includes an 8-watt wedge base lamp and 7" wire leads for connection to 12 VDC power supply. Install directly to deck with (2) #10 fasteners. Cover and lens conceal installation fasteners and seal out water. Lights are visible 112.5°.
Size: 2-3/8" dia. x 1-7/16" vertical height."
Type: Port, Lens: Red, Housing: Black, Case: 6
Sold: Each
|
|
462-23-5040G7 "For use on boats up to 39.4' (12 m) in length, provides 1-mile visibility. Twist/bayonet lock design secures lens and cover to base. Includes an 8-watt wedge base lamp and 7" wire leads for connection to 12 VDC power supply. Install directly to deck with (2) #10 fasteners. Cover and lens conceal installation fasteners and seal out water. Lights are visible 112.5°.
Size: 2-3/8" dia. x 1-7/16" vertical height."
Type: Starboard, Lens: Green, Housing: Black, Case: 6
Sold: Each
|
|
462-23-5080G7 Pulsar Sidelight w/Raised Base, Green
"For use on boats up to 39.4' (12m) in length, Provides 1 mile visibility. For use where the light must be elevated for visibility above rails and carpeting.
- Twist/bayonet design secures lens and cover to base
- 7" wire leads connect to 12V power supply
- 3" high. Black housing
- Includes 9-watt wedge base lamp
- Sold individually, not as pairs
"
Type: Starboard, Lens: Green
Sold: Each
|
|
462-23-5080R7 Pulsar Sidelight w/Raised Base, Red
"For use on boats up to 39.4' (12m) in length, Provides 1 mile visibility. For use where the light must be elevated for visibility above rails and carpeting.
- Twist/bayonet design secures lens and cover to base
- 7" wire leads connect to 12V power supply
- 3" high. Black housing
- Includes 9-watt wedge base lamp
- Sold individually, not as pairs
"
Type: Port, Lens: Red
Sold: Each
|
|
462-23-20277 The new low profile flush hatch pull is an easy access handle for installation in lids, doors, compartments and hatches. Handle is easy to grip, even with gloved hands. Durable ABS construction with black textured finish.
Color: Black, Fastener: #6
|
|
462-23-6724051 Replacement 360 Degree Globe For Series 6700
Replaces: 360 Globe, early models, Fits: 6700, Pkg.: Bulk, Case: 6
Sold: Each
|
|
