Generic

"Advanced solid state electronics monitor your boat's systems and are constantly working to increase performance and economy. The system can be used in new or retrofit installations. The tabs are automatically deployed before taking off to reduce bow rise and time to plane. Once the boat is on plane it is automatically leveled and held there. It's that simple! Setup is simple and it can use some or all of the data from other devices such as GPS speed, engine RPM, fuel consumption, etc. to constantly maintain optimal running angles every time. Two preset manual positions can be stored for such things as rough water or different speeds. A special "hold" feature maintains the boat's planing position until it's powered off. Manual override is also simple; just tap the up or down buttons. All this is controlled from a single 6" x 6" x 2" fully submersible box that contains three gyros and three accelerometers with waterproof connections and components. Plug and play illuminating key pad control with deutsch connection. Interfaces with NMEA 2000 devices to show position information on other devices or to get information from them.
The Auto Glide system requires an NMEA 2000 GPS.
15500101 & 15501101: Are designed for boats without an existing NMEA network. They include a GPS antenna and NMEA 2000 network
Boat Must Be Equipped With Lenco Electric Trim Tabs

• 12 and 24 volt compatible


• Fast, easy installation


• All plug & play connections


• All waterproof, solid state components


• Quick response. Built-in retractor for trim tabs in auto mode


• Reads SmartCraft, NMEA 2000 & J1939 data

• 12 and 24 volt compatible


• Fast, easy installation


• All plug & play connections


• All waterproof, solid state components


• Quick response. Built-in retractor for trim tabs in auto mode


• Reads SmartCraft, NMEA 2000 & J1939 data

Description: w/GPS & NMEA Network, Fits: Single Actuator Tab System

"Advanced solid state electronics monitor your boat's systems and are constantly working to increase performance and economy. The system can be used in new or retrofit installations. The tabs are automatically deployed before taking off to reduce bow rise and time to plane. Once the boat is on plane it is automatically leveled and held there. It's that simple! Setup is simple and it can use some or all of the data from other devices such as GPS speed, engine RPM, fuel consumption, etc. to constantly maintain optimal running angles every time. Two preset manual positions can be stored for such things as rough water or different speeds. A special "hold" feature maintains the boat's planing position until it's powered off. Manual override is also simple; just tap the up or down buttons. All this is controlled from a single 6" x 6" x 2" fully submersible box that contains three gyros and three accelerometers with waterproof connections and components. Plug and play illuminating key pad control with deutsch connection. Interfaces with NMEA 2000 devices to show position information on other devices or to get information from them.
The Auto Glide system requires an NMEA 2000 GPS.
15504101 & 15505101: Do not include GPS antenna and are designed for boats with an existing NMEA 2000 network w/GPS.
Boat Must Be Equipped With Lenco Electric Trim Tabs

• 12 and 24 volt compatible


• Fast, easy installation


• All plug & play connections


• All waterproof, solid state components


• Quick response. Built-in retractor for trim tabs in auto mode


• Reads SmartCraft, NMEA 2000 & J1939 data

• 12 and 24 volt compatible


• Fast, easy installation


• All plug & play connections


• All waterproof, solid state components


• Quick response. Built-in retractor for trim tabs in auto mode


• Reads SmartCraft, NMEA 2000 & J1939 data

Description: w/o GPS & NMEA Network, Fits: Dual Actuator Tab System

"Advanced solid state electronics monitor your boat's systems and are constantly working to increase performance and economy. The system can be used in new or retrofit installations. The tabs are automatically deployed before taking off to reduce bow rise and time to plane. Once the boat is on plane it is automatically leveled and held there. It's that simple! Setup is simple and it can use some or all of the data from other devices such as GPS speed, engine RPM, fuel consumption, etc. to constantly maintain optimal running angles every time. Two preset manual positions can be stored for such things as rough water or different speeds. A special "hold" feature maintains the boat's planing position until it's powered off. Manual override is also simple; just tap the up or down buttons. All this is controlled from a single 6" x 6" x 2" fully submersible box that contains three gyros and three accelerometers with waterproof connections and components. Plug and play illuminating key pad control with deutsch connection. Interfaces with NMEA 2000 devices to show position information on other devices or to get information from them.
The Auto Glide system requires an NMEA 2000 GPS.
15504101 & 15505101: Do not include GPS antenna and are designed for boats with an existing NMEA 2000 network w/GPS.
Boat Must Be Equipped With Lenco Electric Trim Tabs

• 12 and 24 volt compatible


• Fast, easy installation


• All plug & play connections


• All waterproof, solid state components


• Quick response. Built-in retractor for trim tabs in auto mode


• Reads SmartCraft, NMEA 2000 & J1939 data

• 12 and 24 volt compatible


• Fast, easy installation


• All plug & play connections


• All waterproof, solid state components


• Quick response. Built-in retractor for trim tabs in auto mode


• Reads SmartCraft, NMEA 2000 & J1939 data

Description: w/o GPS & NMEA Network, Fits: Single Actuator Tab System

Auto Prop Propeller Nut Anodes w/Nylon Inserts

Mounts on any surface from horizontal up to a 24 degree angle. Wire leads do not flex or hinge with the float like some competitive models. Integral cover dampens bilge sloshing and filters debris. Sealed switch resists moisture, fume-ignition, and shock. Mercury free design. 3-Year Warranty.

Description: Float switch with cover, Size: 2-7/8" x 5-1/4", Volts: 12-24, Amps: 12

Sold: Each

• Depth Highlight (Depth Highlight Range)
• Water Level Offset
• Shallow Water Highlight
• Mark, Import, and Export waypoints
• i-Pilot Link functionality

Sold: Each

Autoglide Control Box Mountng Bracket. See Lenco's AutoGlide website for application information.

Description: Mounting Bracket for Control Box

Sold: Each

Boat must be equipped with Lenco Electric Trim Tabs
All plug & play connections, All waterproof, solid state components
Reads SmartCraft, NMEA 2000 & J1939 data

• Boat must be equipped with Lenco Electric Trim Tabs


• All plug & play connections, All waterproof, solid state components


• Reads SmartCraft, NMEA 2000 & J1939 data

Description: "Control Box, 6" x 6", Fits: Single actuator tabs

Autoglide Extension Cable, 30'

• Boat must be equipped with Lenco Electric Trim Tabs


• All plug & play connections, All waterproof, solid state components


• Reads SmartCraft, NMEA 2000 & J1939 data

Description: 30' Extension Cable

Automatic Charging Relay "ACR"

Blue Sea System SI-Series Start Isolation Automatic Charging Relay automatically isolates batteries during starting to protect sensitive electronics and manages the charging of two battery banks. The 120 AMP continuous rating supports the high-output alternators. LED light indicates when batteries are combined and blinks when the undervoltage or starting isolation feature is engaged.

Features:
• Side and bottom knockouts for power cable connections
• Clip-on cover protects terminal connections
• 1/4" x .031" male quick connect terminals for ground, optional remote LED and starting isolation
• Start Isolation (SI) can be configured for temporary isolation of house loads from engine circuit during engine cranking to protect sensitive electronics
• 12/24 volt auto ranging voltage input
• Hermetically sealed contacts/vaporproof
• Remote LED output indicates relay state away from ACR (required optional LED)
• Senses charging on two battery banks
• Intermittent rating: 5min. = 210 AMPS
• Continuous rating = 120 AMPS
• Amperage operating current = 15mA
• Maximum cable size = 1/0 AWG
• Amperage operating current -
• 12 Volts DC = 175mA
• 24 Volts DC = 115mA

Flapper will automatically allow for water to drain from the hull when boat is under way
Water tight seal when the boat is at a stop
Flexible neoprene plug inserts in the transom drain hole

• Flapper will automatically allow for water to drain from the hull when boat is under way


• Water tight seal when the boat is at a stop


• Flexible neoprene plug inserts in the transom drain hole

Fits: 1" standard drains to 2-1/4" thick transoms"

Sold: Each

Description: Auxiliary Steering Kit, Saltwater

Barrier lined B1-15 Fuel Hose for both gasoline (including ethanol blends up to E85) and diesel (including bio diesel blends up to 100%). Exceeds ABYC H-24, SAE J1527, ISO 8469 B1, USCG Type B1-15; CARB & EPA low permeation Type B1-15 requirements and certification; and is NMMA Type Accepted & CE certified. Provides extraordinary resistance to fuel permeation, aging, and also to heat, cold, and the ozone. Also provides excellent bend-ability.

ID: 1/4", OD: 7/16", Length: 50'

Sold: Each

Barrier lined B1-15 Fuel Hose for both gasoline (including ethanol blends up to E85) and diesel (including bio diesel blends up to 100%). Exceeds ABYC H-24, SAE J1527, ISO 8469 B1, USCG Type B1-15; CARB & EPA low permeation Type B1-15 requirements and certification; and is NMMA Type Accepted & CE certified. Provides extraordinary resistance to fuel permeation, aging, and also to heat, cold, and the ozone. Also provides excellent bend-ability.

ID: 3/8", OD: 37/64", Length: 50'

Sold: Each

Barrier lined B1-15 Fuel Hose for both gasoline (including ethanol blends up to E85) and diesel (including bio diesel blends up to 100%). Exceeds ABYC H-24, SAE J1527, ISO 8469 B1, USCG Type B1-15; CARB & EPA low permeation Type B1-15 requirements and certification; and is NMMA Type Accepted & CE certified. Provides extraordinary resistance to fuel permeation, aging, and also to heat, cold, and the ozone. Also provides excellent bend-ability.

ID: 5/16", OD: 1/2", Length: 50'

Sold: Each

• Easy installation and use
• Smooth and easy operation
• Angled top section makes pump comfortable to use
• Compact for installing in confined spaces
• Comfortable for bare foot use
• Ideal as a priming pump for use with Whale inline electric impeller pumps
• Robust one-piece molded base
• 5 year warranty

GPM: 2.2, Description: "Port Size: 1/2"

Square backplate kit for the 5271 and 5272 SeaStar helms. Used to retrofit new Seastar standard helm into hole cutouts

:

Sold: Each

Back Mount Rack Bezel

Type: 90° Back Mount

Sold: Each

Description: Clear kit, Pkg.: Poly pack