700-26511 Cylinder Shell (Port) For R / MR / Alpha One (1983 & Up)
|
|
700-26531 Cylinder Shell (Port) replaces MerCruiser part # 815935T For Alpha One Gen II
|
|
700-26411 Cylinder Shell (Port) replaces MerCruiser part # 98703T For R / MR / Alpha One (1983 & Up)
|
|
700-51420 Exhaust Manifold Assembly (PORT) replaces MerCruiser part # 912442
|
|
700-21380 Trim Ram Bushing Kit (Rear) replaces MerCruiser part # 17-14872A1 For rear anchor pin on late Mercruisers with large rubber bushings. Kit Contains: | Part # | MerCruiser # | Description | | Part # | MerCruiser # | Description | | 700-21400 | 17-14872A1 | Pin (Rear) | | 700-21672 | 12-815952 | (2)Washer | | 700-21660 | 12-85058 | (2)Washer | | 700-21670 | 12-44163 | (2)Washer | | 700-26330 | 23-99291T | (4)Bushing | | 700-26480 | 19-14842 | (2)Cap |
|
|
700-25010 Filter Bracket 1/4" (Stainless Steel) 1/4” NPTF Ports (2 inputs & 2 outputs)
|
|
700-25030 Filter Bracket 3/8" (Stainless Steel) 3/8” NPTF Ports (2 inputs & 2 outputs)
|
|
700-51410 Exhaust Manifold Assembly (STBD) replaces Mercruiser part # 912441
|
|
700-11350 Forward Gear (Straight) replaces MerCruiser part # 43-68447T1
|
|
700-11340 Pinion Gear (Straight) replaces MerCruiser part # 43-68548T3
|
|
700-11360 Reverse Gear (Straight) replaces MerCruiser part # 43-76250T
|
|
700-25011 Filter Bracket 1/4" (Translucent Red) 1/4” NPTF Ports (2 inputs & 2 outputs)
|
|
700-25031 Filter Bracket 3/8" (Translucent Red) 3/8” NPTF Ports (2 inputs & 2 outputs)
|
|
700-11313 Complete Gear Set (13:21 teeth) For 1996 & Up All ratios except 2.0 / 2.4 (S/N OF 680000 & Up) With No. 21593 Forward Bearing (3.265 O.D.)
Forward gear has retaining ring to stop needle bearing moving rearward
|
|
700-11700 1.75:1 Ratio Complete Gear Set Includes:- Forward/Pinion/Reverse
- Forward Gear Bearing GLM 700-21820
- Pinion Nut GLM 700-11190
- Shim Sets GLM 700-23221, 700-23222
|
|
700-11444 Complete Gear Set Includes:- Forward/Pinion/Reverse
- Forward Gear Bearing GLM 700-21581
- Pinion Nut GLM 700-11192
|
|
700-11440 1.87:1 Ratio Complete Gear Set Includes:- Forward/Pinion/Reverse
- Forward Gear Bearing GLM 700-21820
- Pinion Nut GLM 700-11190
- Shim Sets GLM 700-23221, 700-23222
|
|
700-24957 10 Microns Water Separating Fuel Filter Kit ¼" (Contains: 700-24942, 700-25010) ø 1/4” NPTF Ports Flow: 50 GPH with 2 brass plugs & 2 extension tubes GLM Fuel Filter Features: - 28 or 10 micron filter paper shaped into 70 pleats total 327 sq. in. filtration. The largest filtering capability in the aftermarket.
- BWG #11 heavy duty spring.
- Gasoline resistant rubber seals
- Oxidizing treatment inside powder coated outside for corrosion protection.
- Minimum 196N.m. torgue strength between adapt plate and canister
- Will not separate 2 cycle oil from gasoline!
|
|
700-40140 1/4” Transparent Inline Fuel Filter GLM’s Transparent Inline Fuel Filter
Eliminate contaminants such as dust or dirt particles. Acts not only as a blocking device, but is also a gauge to indicate filter replacement. As affordable and as disposable as in-line fuel filters.
Warning:Do Not Use On Inboard Engine Applications
|
|
700-24942 10 Micron Fuel Filter (Height 4-7/16”) GLM Fuel Filter Features:- 28 or 10 micron filter paper shaped into 70 pleats total 327 sq. in. filtration. The largest filtering capability in the aftermarket.
- BWG #11 heavy duty spring.
- Gasoline resistant rubber seals
- Oxidizing treatment inside powder coated outside for corrosion protection.
- Minimum 196N.m. torgue strength between adapt plate and canister
- Will not separate 2 cycle oil from gasoline!
|
|
