GLM

160° Thermostat Kit replaces MerCruiser part # 807252Q5

For Chevy V6 & V8 Engines Late Models with 160° Thermostats

Kit Contains:

160° Thermostat Kit replaces MerCruiser part # 99155T1

For Chevy V6 & V8 Engines with Closed Cooling (1998 & Up)

Kit Contains:

160° Thermostat Kit replaces MerCruiser part # 99155T2

For Mercruiser Built 4-Cyl. Engines (except 1976-1982 470)

Kit Contains:

2 Barrel Carburetor Mounting Gasket replaces MerCruiser part # 27-805396

Fits 2-Barrel / 5.7 & 7.4L MPI

Complete Gear Set 2.31:1 Ratio

Includes:
• Forward/Pinion/Reverse
• Forward Gear Bearing GLM 700-21820
• Pinion Nut GLM 700-11190
• Shim Sets GLM 700-23221, 700-23222

28 Micron Fuel Filter (Height 4-7/16”) replaces MerCruiser part # 35-60494-1

GLM Fuel Filter Features:
• 28 or 10 micron filter paper shaped into 70 pleats total 327 sq. in. filtration. The largest filtering capability in the aftermarket.
• BWG #11 heavy duty spring.
• Gasoline resistant rubber seals
• Oxidizing treatment inside powder coated outside for corrosion protection.
• Minimum 196N.m. torgue strength between adapt plate and canister
• Will not separate 2 cycle oil from gasoline!

28 Micron Fuel Filter (Height 3-3/4”) replaces MerCruiser part # 35-802893Q

GLM Fuel Filter Features:
• 28 or 10 micron filter paper shaped into 70 pleats total 327 sq. in. filtration. The largest filtering capability in the aftermarket.
• BWG #11 heavy duty spring.
• Gasoline resistant rubber seals
• Oxidizing treatment inside powder coated outside for corrosion protection.
• Minimum 196N.m. torgue strength between adapt plate and canister
• Will not separate 2 cycle oil from gasoline!

3" Cast Iron Spacer Kit - Replaces Mercruiser part # 93320A13

3” Exhaust Elbow DISCONTINUED (Limited Stock Available) replaces MerCruiser part # 76771A2. For Model 140 4 Cylinder 1968-1982.

3" Riser Kit replaces MerCruiser part # 34765A1

Fits:
• MCM V6 & TBI engines w/ 2-piece exhaust manifolds (0M614999 & below)
• MCM/MIE/Ski V8 (305, 350, 377, 454 & 502 CID) engines w/ cast iron elbows (0M299999 & below)
• MCM V8 (305 & 350 CID) carb. engines (0M300000-0M599999)
• MIE & Ski carb. engines (0M300000-0M316999)

3” Spacer replaces MerCruiser part # 61851A2

3" Spacer (Iron Casting) replaces MerCruiser part # 93320A14

For Mercruiser: Model 175-205 GM 229/262 CID V6 (1983-Present)
Model 200-320 GM 305/350/377 CID V8 (1983-Present)
Model 330-370 GM 454/502 CID V8 (B.B.) (1981-Present)

3" Water Shutter replaces MerCruiser part # 99370A2

Aluminum Pencil Anode (w/o Plug)

Includes:
• Anode: 3/4"
• Anode Length: 3/4"
• Anode Thread: 1/2-13

3/4” Brass Plug Anode Thread: 1/2-13

For V6 & V8 Small Block

10 Microns Water Separating Fuel Filter Kit 3/8" (Contains: 700-24942, 700-25030)

ø 3/8” NPTF Ports Flow: 75 GPH with 2 brass plugs & 2 extension tubes

GLM Fuel Filter Features:
• 28 or 10 micron filter paper shaped into 70 pleats total 327 sq. in. filtration. The largest filtering capability in the aftermarket.
• BWG #11 heavy duty spring.
• Gasoline resistant rubber seals
• Oxidizing treatment inside powder coated outside for corrosion protection.
• Minimum 196N.m. torgue strength between adapt plate and canister
• Will not separate 2 cycle oil from gasoline!

3/8” Transparent Inline Fuel Filter

GLM’s Transparent Inline Fuel Filter
Eliminate contaminants such as dust or dirt particles. Acts not only as a blocking device, but is also a gauge to indicate filter replacement. As affordable and as disposable as in-line fuel filters.
Warning:Do Not Use On Inboard Engine Applications