701-105 Chevy Ignitor III with Rev Limiter Kit:
|
|
|
|
|
701-115 This Ford Ignitor III with Rev Limiter Kit 351C-460 consists of the following components:
|
|
701-110 Ford Ignitor II Kit 351C-460:
|
|
701-125 This Olds Ignitor III with Rev Limiter Kit consists of the following components:
|
|
|
|
|
701-1110 8mm 115 Deg Plug Boot Wire Set
-
Two current paths for reliability and redundancy.
- Primary path: Spiral wound stainless steel alloy.
- Secondary path: Carbon impregnated fiberglass center core.
- Low 500 ohm per foot resistance.
- 8mm Silicone jacket to resist high temperatures, moisture, oil and chemicals.
- EPDM (Ethylene Propylene Diene Methylene) inner insulation for superior heat resistance and prevention of arcing and voltage leaks.
- Fiberglass reinforcing braid for added strength and flexibility.
|
|
701-1105 8mm 90 Degree Plug Boot Wire Set
Two current paths for reliability and redundancy.
- Primary path: Spiral wound stainless steel alloy.
- Secondary path: Carbon impregnated fiberglass center core.
- Low 500 ohm per foot resistance.
- 8mm Silicone jacket to resist high temperatures, moisture, oil and chemicals.
- EPDM (Ethylene Propylene Diene Methylene) inner insulation for superior heat resistance and prevention of arcing and voltage leaks.
- Fiberglass reinforcing braid for added strength and flexibility.
|
|
701-1100 8mm Straight Plug Boot Wire Set
-
Two current paths for reliability and redundancy.
- Primary path: Spiral wound stainless steel alloy.
- Secondary path: Carbon impregnated fiberglass center core.
- Low 500 ohm per foot resistance.
- 8mm Silicone jacket to resist high temperatures, moisture, oil and chemicals.
- EPDM (Ethylene Propylene Diene Methylene) inner insulation for superior heat resistance and prevention of arcing and voltage leaks.
- Fiberglass reinforcing braid for added strength and flexibility.
|
|
701-1205 Black 40,000 Volt Coil - Pertronix 40011
- Perfect coil to go with the PerTronix Ignitor breaker-less ignition.
- 40,000 volt Flame-Thrower coil can benefit virtually any distributor type induction system.
- Higher voltage allows larger spark plug gaps for added power, smoother response and better fuel economy.
While it's the perfect coil to go with the breaker-less ignitions, the 40,000 volt Flame-Thrower canister coil can benefit virtually any distributor type inductive system. Its higher voltage allows larger spark plug gaps for added power, smoother response and better fuel economy. These coils are internally resisted so installation and wiring is drastically simplified. Oil filled coils offer great heat control for street driven vehicles, while our epoxy filled coils provide superior winding support for high vibration environments
|
|
701-1215 Black Flame Thrower III Coil - Pertronix 44011
- 45,000 volts.
- Ultra Low 0.32 primary resistance.
- Compatible with Ignitor II and III systems as well as most capacitive discharge systems.
- Charges to peak current typically 30-70% faster than other coils.
- Rapid charge time means maximum spark energy is sustained to higher engine RPM.
Flame-Thrower III coils feature a ultra low resistance and are designed specifically for the new Ignitor III ignition system. Flame Thrower III coils have a high turns ratio and ultra low primary resistance enabling the ignition system to charge faster at high RPM's.
|
|
701-1470 Chevy V6 Ignitor II Billet Distributor - Pertronix D7200800
- Comes with Ignitor II ignition module featuring adaptive dwell control
- Non-vented distributor cap with stainless steel fasteners keeps the distributor cap firmly in place.
- Triple screen spark arrestor offers added protection.
- Marine approved distributors are designed to meet or exceed SAE J1171 standards.
- Warranty: 30 months electronics / limited 1 year mechanical.
|
|
701-1400 Chevy V8 Billet Distributor - Pertronix D200800
Features:
- Comes with the Ignitor II Ignition module featuring Cobalt magnets and Hall Effect trigger for stable timing and precise spark distribution.
- Compatible with most Capacitive Discharge Systems
- Not for use with solid core spark plug wires
- Precision CNC machined 6061-T6 billet aluminum housing is lightweight yet strong.
- Each billet distributor is hand polished and buffed to a high luster.
- Tempered distributor shaft has low torsion displacement for accurate timing and extended operational life.
- Upper ball bearing and oil impregnated bronze lower bushing work together to reduce friction and provide shaft and advance mechanism stability reducing high RPM vibration.
- Precision stamped and balanced mechanical advance weights eliminate erratic timing.
- Adjustable mechanical advance with proprietary limiting function permits multiple settings. Distributors are factory set with a performance advance curve and are provided with additional springs for custom advance curves.
- Premium high dielectric strength cap and rotor with brass terminals.
- Triple screen spark arrestor offers added protection.
- Marine Approved SAE J1171 Certified
- Warranty: 30 Months electronics / Limited 1 year mechanical.
|
|
701-1405 Chevy V8 Ignitor III Billet Distributor - Pertronix D7200800
Features:
- Comes with the Ignitor III Ignition module featuring multiple sparks
thru the entire RPM range.
- Integrated digital REV limiter with LED feedback for precise RPM setting.
- NOT Compatible with CD or Multi-Spark boxes.
- NOT for use with solid core spark plug wires
- Precision CNC machined 6061-T6 billet aluminum housing is lightweight yet strong.
- Each billet distributor is hand polished and buffed to a high luster.
- Tempered distributor shaft has low torsion displacement for accurate
timing and extended operational life.
- Upper ball bearing and oil impregnated bronze lower bushing work
together to reduce friction and provide shaft and advance mechanism stability reducing high RPM vibration.
- Precision stamped and balanced mechanical advance weights eliminate
erratic timing.
- Adjustable mechanical advance with proprietary limiting function permits multiple settings.Distributors are factory set with a performance advance curve and are provided with additional springs for custom advance curves.
- Premium high dielectric strength cap and rotor with brass terminals.
- Triple screen spark arrestor offers added protection.
- Marine Approved SAE J1171 Certified
- Warranty: 30 Months electronics / Limited 1 year mechanical.
|
|
701-1410 Chevy V8 Reverse Rotation Billet Distributor - Pertronix D209800
Features:
- Comes with the Ignitor II Ignition module featuring Cobalt magnets and Hall Effect trigger for stable timing and precise spark distribution.
- Compatible with most Capacitive Discharge Systems
- Not for use with solid core spark plug wires
- Precision CNC machined 6061-T6 billet aluminum housing is lightweight yet strong.
- Each billet distributor is hand polished and buffed to a high luster.
- Tempered distributor shaft has low torsion displacement for accurate timing and extended operational life.
- Upper ball bearing and oil impregnated bronze lower bushing work together to reduce friction and provide shaft and advance mechanism stability reducing high RPM vibration.
- Precision stamped and balanced mechanical advance weights eliminate erratic timing.
- Adjustable mechanical advance with proprietary limiting function permits multiple settings. Distributors are factory set with a performance advance curve and are provided with additional springs for custom advance curves.
- Premium high dielectric strength cap and rotor with brass terminals.
- Triple screen spark arrestor offers added protection.
- Marine Approved SAE J1171 Certified
- Warranty: 30 Months electronics / Limited 1 year mechanical.
|
|
701-1415 Chevy V8 Reverse Rotation Ignitor III Billet Distributor - Pertronix D7209800
Features:
- Comes with the Ignitor III Ignition module featuring multiple sparks
thru the entire RPM range.
- Integrated digital REV limiter with LED feedback for precise RPM setting.
- NOT Compatible with CD or Multi-Spark boxes.
- NOT for use with solid core spark plug wires
- Precision CNC machined 6061-T6 billet aluminum housing is lightweight yet strong.
- Each billet distributor is hand polished and buffed to a high luster.
- Tempered distributor shaft has low torsion displacement for accurate
timing and extended operational life.
- Upper ball bearing and oil impregnated bronze lower bushing work
together to reduce friction and provide shaft and advance mechanism stability reducing high RPM vibration.
- Precision stamped and balanced mechanical advance weights eliminate
erratic timing.
- Adjustable mechanical advance with proprietary limiting function permits multiple settings.Distributors are factory set with a performance advance curve and are provided with additional springs for custom advance curves.
- Premium high dielectric strength cap and rotor with brass terminals.
- Triple screen spark arrestor offers added protection.
- Marine Approved SAE J1171 Certified
- Warranty: 30 Months electronics / Limited 1 year mechanical.
|
|
701-1200 Chrome 40,000 Volt Coil - Pertronix 40001
- Perfect coil to go with the PerTronix Ignitor breaker-less ignition.
- 40,000 volt Flame-Thrower coil can benefit virtually any distributor type induction system.
- Higher voltage allows larger spark plug gaps for added power, smoother response and better fuel economy.
While it's the perfect coil to go with the breaker-less ignitions, this 40,000 volt Flame-Thrower canister coil can benefit virtually any distributor type inductive system. Its higher voltage allows larger spark plug gaps for added power, smoother response and better fuel economy. These coils are internally resisted so installation and wiring is drastically simplified. Oil filled coils offer great heat control for street driven vehicles, while the epoxy filled coils provide superior winding support for high vibration environments.
|
|
701-1210 Chrome Flame Thrower III Coil - Pertronix 44001
- 45,000 volts.
- Ultra Low 0.32 primary resistance.
- Compatible with Ignitor II and III systems as well as most capacitive discharge systems.
- Charges to peak current typically 30-70% faster than other coils.
- Rapid charge time means maximum spark energy is sustained to higher engine RPM.
Flame-Thrower III coils feature a ultra low resistance and are designed specifically for the new Ignitor III ignition system. Flame Thrower III coils have a high turns ratio and ultra low primary resistance enabling the ignition system to charge faster at high RPM's.
|
|
701-1420 Chrysler 273-360 Billet Distributor - Pertronix D241800
Features:
- Comes with the Ignitor II Ignition module featuring Cobalt magnets and Hall Effect trigger for stable timing and precise spark distribution.
- Compatible with most Capacitive Discharge Systems
- Not for use with solid core spark plug wires
- Precision CNC machined 6061-T6 billet aluminum housing is lightweight yet strong.
- Each billet distributor is hand polished and buffed to a high luster.
- Tempered distributor shaft has low torsion displacement for accurate timing and extended operational life.
- Upper ball bearing and oil impregnated bronze lower bushing work together to reduce friction and provide shaft and advance mechanism stability reducing high RPM vibration.
- Precision stamped and balanced mechanical advance weights eliminate erratic timing.
- Adjustable mechanical advance with proprietary limiting function permits multiple settings. Distributors are factory set with a performance advance curve and are provided with additional springs for custom advance curves.
- Premium high dielectric strength cap and rotor with brass terminals.
- Triple screen spark arrestor offers added protection.
- Marine Approved SAE J1171 Certified
- Warranty: 30 Months electronics / Limited 1 year mechanical.
|
|
701-1425 Chrysler 273-360 Ignitor III Billet Distributor - Pertronix D7241800
Features:
- Comes with the Ignitor III Ignition module featuring multiple sparks
thru the entire RPM range.
- Integrated digital REV limiter with LED feedback for precise RPM setting.
- NOT Compatible with CD or Multi-Spark boxes.
- NOT for use with solid core spark plug wires
- Precision CNC machined 6061-T6 billet aluminum housing is lightweight yet strong.
- Each billet distributor is hand polished and buffed to a high luster.
- Tempered distributor shaft has low torsion displacement for accurate
timing and extended operational life.
- Upper ball bearing and oil impregnated bronze lower bushing work
together to reduce friction and provide shaft and advance mechanism stability reducing high RPM vibration.
- Precision stamped and balanced mechanical advance weights eliminate
erratic timing.
- Adjustable mechanical advance with proprietary limiting function permits multiple settings.Distributors are factory set with a performance advance curve and are provided with additional springs for custom advance curves.
- Premium high dielectric strength cap and rotor with brass terminals.
- Triple screen spark arrestor offers added protection.
- Marine Approved SAE J1171 Certified
- Warranty: 30 Months electronics / Limited 1 year mechanical.
|
|
