701-1000 For Most Mallory V-8 Distributors
Never change your points again! The convenience of an electronic ignition system without replacing OEM distributor. Unit fits inside OEM points-type distributor. Easily installed without complicated wiring connections.
- Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
- 2:1 improvement over "points" in current fall time for increased coil output.
- Rotating cobalt magnets trigger a Hall Effect integrated circuit . ...no points to burn, ...no moving parts to wear out.
- Epoxy molding makes our module impervious to dirt, oil, grease and moisture.
- Stable timing ...no need for any adjustments.
Well over two million Ignitors are in use for good reason It's the electronic ignition that replaces the points in virtually all marine engines while still maintaining the stock appearance! You'll improve performance and dependability, and "never change points again!
|
|
701-1005 For Most Prestolite V-8 Snap and Screw Down Cap
Never change your points again! The convenience of an electronic ignition
system without replacing OEM distributor. Unit fits inside OEM points-type
distributor. Easily installed without complicated wiring connections.
- Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
- 2:1 improvement over "points" in current fall time for increased coil output.
- Rotating cobalt magnets trigger a Hall Effect integrated circuit . ...no points to burn, ...no moving parts to wear out.
- Epoxy molding makes our module impervious to dirt, oil, grease and moisture.
- Stable timing ...no need for any adjustments.
Well over two million Ignitors are in use for good reason It's the electronic
ignition that replaces the points in virtually all marine engines while still
maintaining the stock appearance! You'll improve performance and dependability,
and "never change points again!
|
|

701-1430 Ford 221-302 Billet Distributor - Pertronix D230800
Features:
- Comes with the Ignitor II Ignition module featuring Cobalt magnets and Hall Effect trigger for stable timing and precise spark distribution.
- Compatible with most Capacitive Discharge Systems
- Not for use with solid core spark plug wires
- Precision CNC machined 6061-T6 billet aluminum housing is lightweight yet strong.
- Each billet distributor is hand polished and buffed to a high luster.
- Tempered distributor shaft has low torsion displacement for accurate timing and extended operational life.
- Upper ball bearing and oil impregnated bronze lower bushing work together to reduce friction and provide shaft and advance mechanism stability reducing high RPM vibration.
- Precision stamped and balanced mechanical advance weights eliminate erratic timing.
- Adjustable mechanical advance with proprietary limiting function permits multiple settings. Distributors are factory set with a performance advance curve and are provided with additional springs for custom advance curves.
- Premium high dielectric strength cap and rotor with brass terminals.
- Triple screen spark arrestor offers added protection.
- Marine Approved SAE J1171 Certified
- Warranty: 30 Months electronics / Limited 1 year mechanical.
|
|

701-1435 Ford 221-302 Ignitor III Billet Distributor - Pertronix D7230800
Features:
- Comes with the Ignitor III Ignition module featuring multiple sparks
thru the entire RPM range.
- Integrated digital REV limiter with LED feedback for precise RPM setting.
- NOT Compatible with CD or Multi-Spark boxes.
- NOT for use with solid core spark plug wires
- Precision CNC machined 6061-T6 billet aluminum housing is lightweight yet strong.
- Each billet distributor is hand polished and buffed to a high luster.
- Tempered distributor shaft has low torsion displacement for accurate
timing and extended operational life.
- Upper ball bearing and oil impregnated bronze lower bushing work
together to reduce friction and provide shaft and advance mechanism stability reducing high RPM vibration.
- Precision stamped and balanced mechanical advance weights eliminate
erratic timing.
- Adjustable mechanical advance with proprietary limiting function permits multiple settings.Distributors are factory set with a performance advance curve and are provided with additional springs for custom advance curves.
- Premium high dielectric strength cap and rotor with brass terminals.
- Triple screen spark arrestor offers added protection.
- Marine Approved SAE J1171 Certified
- Warranty: 30 Months electronics / Limited 1 year mechanical.
|
|

701-1450 Ford 351C - 460 Billet Distributor - Pertronix D232800
Features:
- Comes with the Ignitor II Ignition module featuring Cobalt magnets and Hall Effect trigger for stable timing and precise spark distribution.
- Compatible with most Capacitive Discharge Systems
- Not for use with solid core spark plug wires
- Precision CNC machined 6061-T6 billet aluminum housing is lightweight yet strong.
- Each billet distributor is hand polished and buffed to a high luster.
- Tempered distributor shaft has low torsion displacement for accurate timing and extended operational life.
- Upper ball bearing and oil impregnated bronze lower bushing work together to reduce friction and provide shaft and advance mechanism stability reducing high RPM vibration.
- Precision stamped and balanced mechanical advance weights eliminate erratic timing.
- Adjustable mechanical advance with proprietary limiting function permits multiple settings. Distributors are factory set with a performance advance curve and are provided with additional springs for custom advance curves.
- Premium high dielectric strength cap and rotor with brass terminals.
- Triple screen spark arrestor offers added protection.
- Marine Approved SAE J1171 Certified
- Warranty: 30 Months electronics / Limited 1 year mechanical.
|
|

701-1455 Ford 351C - 460 Ignitor III Billet Distributor - Pertronix D7232800
Features:
- Comes with the Ignitor III Ignition module featuring multiple sparks
thru the entire RPM range.
- Integrated digital REV limiter with LED feedback for precise RPM setting.
- NOT Compatible with CD or Multi-Spark boxes.
- NOT for use with solid core spark plug wires
- Precision CNC machined 6061-T6 billet aluminum housing is lightweight yet strong.
- Each billet distributor is hand polished and buffed to a high luster.
- Tempered distributor shaft has low torsion displacement for accurate
timing and extended operational life.
- Upper ball bearing and oil impregnated bronze lower bushing work
together to reduce friction and provide shaft and advance mechanism stability reducing high RPM vibration.
- Precision stamped and balanced mechanical advance weights eliminate
erratic timing.
- Adjustable mechanical advance with proprietary limiting function permits multiple settings.Distributors are factory set with a performance advance curve and are provided with additional springs for custom advance curves.
- Premium high dielectric strength cap and rotor with brass terminals.
- Triple screen spark arrestor offers added protection.
- Marine Approved SAE J1171 Certified
- Warranty: 30 Months electronics / Limited 1 year mechanical.
|
|

701-1440 Ford 351W Billet Distributor - Pertronix D231800
Features:
- Comes with the Ignitor II Ignition module featuring Cobalt magnets and Hall Effect trigger for stable timing and precise spark distribution.
- Compatible with most Capacitive Discharge Systems
- Not for use with solid core spark plug wires
- Precision CNC machined 6061-T6 billet aluminum housing is lightweight yet strong.
- Each billet distributor is hand polished and buffed to a high luster.
- Tempered distributor shaft has low torsion displacement for accurate timing and extended operational life.
- Upper ball bearing and oil impregnated bronze lower bushing work together to reduce friction and provide shaft and advance mechanism stability reducing high RPM vibration.
- Precision stamped and balanced mechanical advance weights eliminate erratic timing.
- Adjustable mechanical advance with proprietary limiting function permits multiple settings. Distributors are factory set with a performance advance curve and are provided with additional springs for custom advance curves.
- Premium high dielectric strength cap and rotor with brass terminals.
- Triple screen spark arrestor offers added protection.
- Marine Approved SAE J1171 Certified
- Warranty: 30 Months electronics / Limited 1 year mechanical.
|
|

701-1445 Ford 351W Ignitor III Billet Distributor - Pertronix D7231800
Features:
- Comes with the Ignitor III Ignition module featuring multiple sparks
thru the entire RPM range.
- Integrated digital REV limiter with LED feedback for precise RPM setting.
- NOT Compatible with CD or Multi-Spark boxes.
- NOT for use with solid core spark plug wires
- Precision CNC machined 6061-T6 billet aluminum housing is lightweight yet strong.
- Each billet distributor is hand polished and buffed to a high luster.
- Tempered distributor shaft has low torsion displacement for accurate
timing and extended operational life.
- Upper ball bearing and oil impregnated bronze lower bushing work
together to reduce friction and provide shaft and advance mechanism stability reducing high RPM vibration.
- Precision stamped and balanced mechanical advance weights eliminate
erratic timing.
- Adjustable mechanical advance with proprietary limiting function permits multiple settings.Distributors are factory set with a performance advance curve and are provided with additional springs for custom advance curves.
- Premium high dielectric strength cap and rotor with brass terminals.
- Triple screen spark arrestor offers added protection.
- Marine Approved SAE J1171 Certified
- Warranty: 30 Months electronics / Limited 1 year mechanical.
|
|
701-1305
- Replacement distributor cap for Flame-Thrower distributors.
- High dielectric strength cap
- Caps for Flame-Thrower "Billet" distributors available with male or female brass terminals.
|
|

701-1460 Olds 260 - 455 Billet Distributor - Pertronix D210800
Features:
- Comes with the Ignitor II Ignition module featuring Cobalt magnets and Hall Effect trigger for stable timing and precise spark distribution.
- Compatible with most Capacitive Discharge Systems
- Not for use with solid core spark plug wires
- Precision CNC machined 6061-T6 billet aluminum housing is lightweight yet strong.
- Each billet distributor is hand polished and buffed to a high luster.
- Tempered distributor shaft has low torsion displacement for accurate timing and extended operational life.
- Upper ball bearing and oil impregnated bronze lower bushing work together to reduce friction and provide shaft and advance mechanism stability reducing high RPM vibration.
- Precision stamped and balanced mechanical advance weights eliminate erratic timing.
- Adjustable mechanical advance with proprietary limiting function permits multiple settings. Distributors are factory set with a performance advance curve and are provided with additional springs for custom advance curves.
- Premium high dielectric strength cap and rotor with brass terminals.
- Triple screen spark arrestor offers added protection.
- Marine Approved SAE J1171 Certified
- Warranty: 30 Months electronics / Limited 1 year mechanical.
|
|

701-1465 Olds 260 - 455 Ignitor III Billet Distributor - Pertronix D7210800
Features:
- Comes with the Ignitor III Ignition module featuring multiple sparks
thru the entire RPM range.
- Integrated digital REV limiter with LED feedback for precise RPM setting.
- NOT Compatible with CD or Multi-Spark boxes.
- NOT for use with solid core spark plug wires
- Precision CNC machined 6061-T6 billet aluminum housing is lightweight yet strong.
- Each billet distributor is hand polished and buffed to a high luster.
- Tempered distributor shaft has low torsion displacement for accurate
timing and extended operational life.
- Upper ball bearing and oil impregnated bronze lower bushing work
together to reduce friction and provide shaft and advance mechanism stability reducing high RPM vibration.
- Precision stamped and balanced mechanical advance weights eliminate
erratic timing.
- Adjustable mechanical advance with proprietary limiting function permits multiple settings.Distributors are factory set with a performance advance curve and are provided with additional springs for custom advance curves.
- Premium high dielectric strength cap and rotor with brass terminals.
- Triple screen spark arrestor offers added protection.
- Marine Approved SAE J1171 Certified
- Warranty: 30 Months electronics / Limited 1 year mechanical.
|
|
701-1300
- Replacement distributor cap for Flame-Thrower distributors.
- High dielectric strength cap
- Caps for Flame-Thrower "Billet" distributors available with male or female brass terminals.
|
|
701-1315 Pertronix billet distributor module, it fits all of the standard Pertronix billet distributors.
|
|
701-1310
- Rotor for Flame-Thrower cast distributors
- Replacement premium rotor with brass contact.
|
|