462-1-HC53263 This cylinder fits most most power and non-power assist sterndrives. It can be used on single and multiple drives with multiple steering station connection. This cylinder features simple autopilot interface. Model: BA150-7EM Balanced Sold: Each
|
|
462-1-HC5332 This cylinder fits most most power and non-power assist sterndrives. It can be used on single and multiple drives with multiple steering station connection. This cylinder features simple autopilot interface. Model: Unbalanced Sold: Each
|
|
462-1-HA5438 Use for all inboard/outboard, outboard, and inboard Seastar hydraulic helms. Kit includes: hose with screw cap which fits SeaStar or equivalent oil bottles and push pin for venting/resealing bottle. Allows for clean bleed when used properly. : Sold: Each
|
|
462-1-HC53753 Type: Front Mt., Description: Catamaran Cylinder Sold: Each
|
|
462-1-HC53473 Type: Front Mt., Description: Honda 115-130 hp Sold: Each
|
|
462-1-HC53483 Type: Front Mt., Description: OMC Sold: Each
|
|
462-1-HC53583 Type: Front Mt., Description: Yamaha 4-stroke, Mount: Pivot Sold: Each
|
|
462-1-HK6400A3 The world's most popular outboard hydraulic system offers smooth, super-efficient steering for today's high performance hulls. It's the OEM choice for center consoles, cruisers and more. Applications: Single and dual non-power-assisted outboard engines up to 350 HP (700 combined HP for counter-rotating duals) that have ABYC standard engine tilt tube. Ideal for cruisers, runabouts, center console boats, offshore fishing boats and many more. Suitable for speeds up to 60 MPH and dual station use (with purchase of extra helm, hose & fittings). Allows independent engine tilt in dual engine installations. Dual engines require purchase of a tie bar kit and extra hardware. Helm and cylinder equipped with adjustable O-ring fittings to simplify the installation process and allow for simple reorientation of the fittings after installation. Features: - 5 turns lock-to-lock with 1.7 cu. in. helms
- Compact helm witha 4-7/16" footprint; needs 3" dash hole (Tilt requires larger dash cut out)
- Standard 3/4" tapered steering shaft
- Factory swaged HO51xx hoses sold separately
Kit Includes:- HH52713 - SeaStar Helm 1.7 cu. in.
- HC53453 - SeaStar Pivot Cylinder
- HA5430 (2) - Hydraulic Oil (1 Liter)
Description: Steering System w/o Hoses Features: - 5 turns lock-to-lock with 1.7 cu. in. helms
- Compact helm with 4-7/16" footprint; needs 3" dash hole (Tilt requires larger dash cut out)
- Standard 3/4" tapered steering shaft
- Factory swaged HO51xx hoses sold separately
Kit Includes:- HH52713 - SeaStar Helm 1.7 cu. in.
- HC53453 - SeaStar Pivot Cylinder
- HA5430 (2) - Hydraulic Oil (1 Liter)
The world's most popular outboard hydraulic system offers smooth, super-efficient steering for today's high performance hulls. It's the OEM choice for center consoles, cruisers and more.Applications: Single and dual non-power-assisted outboard engines up to 350 HP (700 combined HP for counter-rotating duals) that have ABYC standard engine tilt tube. Ideal for cruisers, runabouts, center console boats, offshore fishing boats and many more. Suitable for speeds up to 60 MPH and dual station use (with purchase of extra helm, hose & fittings). Allows independent engine tilt in dual engine installations. Dual engines require purchase of a tie bar kit and extra hardware.Helm and cylinder equipped with adjustable O-ring fittings to simplify the installation process and allow for simple reorientation of the fittings after installation.
|
|
462-1-HK44103 SeaStar inboard kits include the 1.7 front mount helm, 60 feet of tubing, and 2 x 1 liter hydraulic fluid. Helm and cylinder now equipped with adjustable O-ring fittings to simplify the installation process and allow for simple reorientation of the fittings after installation. Description: Planing hulls to 32ft, Cylinder: HC5312-3 Sold: Each
|
|
462-1-HC53703 SeaStar outboard steering
Side mount cylinders are unbalanced and offer 4.8 or 5.7 turns lock-to-lock. It is suitable for shallow splashwells and use on engines fitted with power steering. For single engines to 300 hp and multiple outboard engine installations with total power to 600 hp in counter rotating applications.
Description: Side Mount Cylinder - 125-8
|
|
462-1-HC53803 SeaStar outboard steering
Splashwell Mount cylinders are an unbalanced, light duty alternative to front & side mount with 5.5 or 6.5 turns lock-to-lock for engines with or without support tubes. For single engines to 300 hp and multiple outboard engine installations with total power to 600 hp in counter rotating applications. It can be transom or hull mounted.
Description: Splashwell Mount 125-9
|
|
462-1-HH57703 Type: SeaStar 2.0 Pro Front Mount Sold: Each
|
|
462-1-HK7514A3 The ultimate steering for high speed single outboards, SeaStar PRO®, is designed for the high speed and performance of today's top end bass boats. Recommended for single outboards up to 350 HP (even with jack plates and performance props), SeaStar PRO has steered the BASS Masters Classic® since 1994 and it's the choice of high performance outboard boat builders.
Applications: Seastar Pro is for high-performance boats with single non-power-assisted outboards up to 300 HP, especially those capable of speeds over 60 MPH, which demand maximum steering control and comfort. It is suitable for use with high-performance propellers and jack plates.
Applications: For high-performance boats with single non-power-assisted outboards up to 300HP, especially those capable of speeds over 60 MPH, which demand maximum steering control and comfort. Suitable for use with high-performance props and jack plates.
- Patented steering lock valves
- Low friction hydraulic steering system
- 4.25 turns from lock-to-lock
- Compact helm has only a 4-7/16" footprint - needs only 3" dash hole (Tilt requires larger hole)
- Optional hoses with through-bulkhead fittings; multiple helm mounting options
- Factory swagged hoses are Kevlar® reinforced
- Packaged complete with helm, cylinder, hoses, fittings, oil, bleeder kit and detailed instructions
- Standard 3/4" tapered steering shaft
- Fast, easy installation
- Meets A.B.Y.C. standards
- Meets N.M.M.A. certification requirements
|
|
462-1-HK7516A3 The ultimate steering for high speed single outboards, SeaStar PRO®, is designed for the high speed and performance of today's top end bass boats. Recommended for single outboards up to 350 HP (even with jack plates and performance props), SeaStar PRO has steered the BASS Masters Classic® since 1994 and it's the choice of high performance outboard boat builders.
Applications: Seastar Pro is for high-performance boats with single non-power-assisted outboards up to 300 HP, especially those capable of speeds over 60 MPH, which demand maximum steering control and comfort. It is suitable for use with high-performance propellers and jack plates.
Applications: For high-performance boats with single non-power-assisted outboards up to 300HP, especially those capable of speeds over 60 MPH, which demand maximum steering control and comfort. Suitable for use with high-performance props and jack plates.
- Patented steering lock valves
- Low friction hydraulic steering system
- 4.25 turns from lock-to-lock
- Compact helm has only a 4-7/16" footprint - needs only 3" dash hole (Tilt requires larger hole)
- Optional hoses with through-bulkhead fittings; multiple helm mounting options
- Factory swaged hoses are Kevlar® reinforced
- Packaged complete with helm, cylinder, hoses, fittings, oil, bleeder kit and detailed instructions
- Standard 3/4" tapered steering shaft
- Fast, easy installation
- Meets A.B.Y.C. standards
- Meets N.M.M.A. certification requirements
|
|
462-1-HK7518A3 The ultimate steering for high speed single outboards, SeaStar PRO®, is designed for the high speed and performance of today's top end bass boats. Recommended for single outboards up to 350 HP (even with jack plates and performance props), SeaStar PRO has steered the BASS Masters Classic® since 1994 and it's the choice of high performance outboard boat builders.
Applications: Seastar Pro is for high-performance boats with single non-power-assisted outboards up to 300 HP, especially those capable of speeds over 60 MPH, which demand maximum steering control and comfort. It is suitable for use with high-performance propellers and jack plates.
Applications: For high-performance boats with single non-power-assisted outboards up to 300HP, especially those capable of speeds over 60 MPH, which demand maximum steering control and comfort. Suitable for use with high-performance props and jack plates.
- Patented steering lock valves
- Low friction hydraulic steering system
- 4.25 turns from lock-to-lock
- Compact helm has only a 4-7/16" footprint - needs only 3" dash hole (Tilt requires larger hole)
- Optional hoses with through-bulkhead fittings; multiple helm mounting options
- Factory swaged hoses are Kevlar® reinforced
- Packaged complete with helm, cylinder, hoses, fittings, oil, bleeder kit and detailed instructions
- Standard 3/4" tapered steering shaft
- Fast, easy installation
- Meets A.B.Y.C. standards
- Meets N.M.M.A. certification requirements
|
|
462-1-HK7520A3 The ultimate steering for high speed single outboards, SeaStar PRO®, is designed for the high speed and performance of today's top end bass boats. Recommended for single outboards up to 350 HP (even with jack plates and performance props), SeaStar PRO has steered the BASS Masters Classic® since 1994 and it's the choice of high performance outboard boat builders.
Applications: Seastar Pro is for high-performance boats with single non-power-assisted outboards up to 300 HP, especially those capable of speeds over 60 MPH, which demand maximum steering control and comfort. It is suitable for use with high-performance propellers and jack plates.
Applications: For high-performance boats with single non-power-assisted outboards up to 300HP, especially those capable of speeds over 60 MPH, which demand maximum steering control and comfort. Suitable for use with high-performance props and jack plates.
- Patented steering lock valves
- Low friction hydraulic steering system
- 4.25 turns from lock-to-lock
- Compact helm has only a 4-7/16" footprint - needs only 3" dash hole (Tilt requires larger hole)
- Optional hoses with through-bulkhead fittings; multiple helm mounting options
- Factory swaged hoses are Kevlar® reinforced
- Packaged complete with helm, cylinder, hoses, fittings, oil, bleeder kit and detailed instructions
- Standard 3/4" tapered steering shaft
- Fast, easy installation
- Meets A.B.Y.C. standards
- Meets N.M.M.A. certification requirements
|
|
462-1-HK7522A3 The ultimate steering for high speed single outboards, SeaStar PRO®, is designed for the high speed and performance of today's top end bass boats. Recommended for single outboards up to 350 HP (even with jack plates and performance props), SeaStar PRO has steered the BASS Masters Classic® since 1994 and it's the choice of high performance outboard boat builders.
Applications: Seastar Pro is for high-performance boats with single non-power-assisted outboards up to 300 HP, especially those capable of speeds over 60 MPH, which demand maximum steering control and comfort. It is suitable for use with high-performance propellers and jack plates.
Applications: For high-performance boats with single non-power-assisted outboards up to 300HP, especially those capable of speeds over 60 MPH, which demand maximum steering control and comfort. Suitable for use with high-performance props and jack plates.
- Patented steering lock valves
- Low friction hydraulic steering system
- 4.25 turns from lock-to-lock
- Compact helm has only a 4-7/16" footprint - needs only 3" dash hole (Tilt requires larger hole)
- Optional hoses with through-bulkhead fittings; multiple helm mounting options
- Factory swaged hoses are Kevlar® reinforced
- Packaged complete with helm, cylinder, hoses, fittings, oil, bleeder kit and detailed instructions
- Standard 3/4" tapered steering shaft
- Fast, easy installation
- Meets A.B.Y.C. standards
- Meets N.M.M.A. certification requirements
|
|
462-1-HH61913 "Teleflex tilt steering delivers unsurpassed performance and flexibility with smooth operation and feel, 48° of tilt, and 5 lock positions. Fits most styled and formed dashes. Preloaded dual taper bearings ensure minimal excess free play. Standard 3/4" tapered shaft." " Improved Seastar Helms (part numbers ending in "3") are now equipped with adjustable O-ring fittings to simplify the installation process and allow for simple reorientation of the fittings after installation. " Model: Sport SeaStar 1.7 Sold: Each
|
|
462-1-HH61903 "Improved Seastar Helms (part numbers ending in "3") are now equipped with adjustable O-ring fittings to simplify the installation process and allow for simple reorientation of the fittings after installation." Model: 2 Sold: Each
|
|
462-1-HK6400TS3 This popular outboard hydraulic steering system offers smooth, super-efficient steering for high performance hulls with single or multiple outboards up to 700 hp combined. Helm and cylinder now equipped with adjustable O-ring fittings to simplify the installation process and allow for simple reorientation of the fittings after installation. Application: Single and dual non-power assisted outboard engines up to 350 hp (700 combined HP for counter-rotating duals) that have ABYC standard engine tilt tube. Ideal for cruisers, runabouts, center consoles, offshore fishing boats, and many more. Suitable for speeds up to 60 MPH and dual station use (with purchase of extra helm, hose and fittings). Allows independent engine tilt in dual engine installations. Dual engines require purchase of a tie bar kit and extra hardware. Hoses sold separately. Features:- 5 turns lock-to-lock with 1.7 helms
- Compact tilt helm
- Complete with helm, cylinder, fittings, oil and bleeder kit
- Standard 3/4" tapered shaft"
Description: Tilt Steering System w/o Hoses This popular outboard hydraulic steering system offers smooth, super-efficient steering for high performance hulls with single or multiple outboards up to 700 hp combined. Helm and cylinder now equipped with adjustable O-ring fittings to simplify the installation process and allow for simple reorientation of the fittings after installation. Application: Single and dual non-power assisted outboard engines up to 350 hp (700 combined HP for counter-rotating duals) that have ABYC standard engine tilt tube. Ideal for cruisers, runabouts, center consoles, offshore fishing boats, and many more. Suitable for speeds up to 60 MPH and dual station use (with purchase of extra helm, hose and fittings). Allows independent engine tilt in dual engine installations. Dual engines require purchase of a tie bar kit and extra hardware. Hoses sold separately. Features:- 5 turns lock-to-lock with 1.7 helms
- Compact tilt helm
- Complete with helm, cylinder, fittings, oil and bleeder kit
- Standard 3/4" tapered shaft"
|
|
