135-22502 500 Gallon Per Hour Bilge Pump
These Bilge Pumps are made in America, and are of top quality These pumps
meet all necessary USCG requirements and are tested and specified by over 200
boat manufacturers.
|
|
135-22702 750 Gallon Per Hour Pump
These Bilge Pumps are made in America, and are of top quality These pumps
meet all necessary USCG requirements and are tested and specified by over 200
boat manufacturers.
|
|
135-22102 These Bilge Pumps are made in America, and are of top quality These pumps
meet all necessary USCG requirements and are tested and specified by over 200
boat manufacturers.
|
|
135-32503 500 GPH Cartridge Bilge Pump
Bilge pump cleaning and maintenance no longer call for complete disassembly. You can now leave the pump casing attached to both the boat and the hoses – assuming you own one of SPX Johnson Pump’s cartridge bilge pumps. Cartridge bilge pumps from SPX Johnson Pump can be removed for cleaning or replacement without the use of a single tool. Lift a tab on the top, give the cartridge a twist and pull it out; that’s all there is to it. The cartridge contains an all-in-one motor/impeller unit with no loose parts. The cartridge line is a further development of SPX Johnson Pump’s acclaimed bilge pumps, which have received highest ratings in many different independent tests over the years.
Features & Benefits
- All-in one motor/impeller unit
- No tools needed for maintenance
- Extremely energy efficient
- Water cooled motor for long service life
- Five models for fifferent capacity needs
- Can be equipped with a float switch for automatic operation
- Meets the strict international standard, ISO 8849 Marine
- Made in the USA
Water Cooled For Extended Service
The cartridge pumps are manufactured in the United States and the new line encompasses five compact pumps, each for a different capacity need. All of them use remarkably little electricity for the amount of water they pump. Their improved, more efficient motors also provide increased service life, thanks in part to an ingenious solution which circulates the discharge water around the motor for cooling.
|
|
135-32703 750 GPH Cartridge Bilge Pump
Bilge pump cleaning and maintenance no longer call for complete disassembly. You can now leave the pump casing attached to both the boat and the hoses – assuming you own one of SPX Johnson Pump’s cartridge bilge pumps. Cartridge bilge pumps from SPX Johnson Pump can be removed for cleaning or replacement without the use of a single tool. Lift a tab on the top, give the cartridge a twist and pull it out; that’s all there is to it. The cartridge contains an all-in-one motor/impeller unit with no loose parts. The cartridge line is a further development of SPX Johnson Pump’s acclaimed bilge pumps, which have received highest ratings in many different independent tests over the years.
Features & Benefits
- All-in one motor/impeller unit
- No tools needed for maintenance
- Extremely energy efficient
- Water cooled motor for long service life
- Five models for fifferent capacity needs
- Can be equipped with a float switch for automatic operation
- Meets the strict international standard, ISO 8849 Marine
- Made in the USA
Water Cooled For Extended Service
The cartridge pumps are manufactured in the United States and the new line encompasses five compact pumps, each for a different capacity need. All of them use remarkably little electricity for the amount of water they pump. Their improved, more efficient motors also provide increased service life, thanks in part to an ingenious solution which circulates the discharge water around the motor for cooling.
|
|
135-32903 1000 GPH Cartridge Bilge Pump
Bilge pump cleaning and maintenance no longer call for complete disassembly. You can now leave the pump casing attached to both the boat and the hoses – assuming you own one of SPX Johnson Pump’s cartridge bilge pumps. Cartridge bilge pumps from SPX Johnson Pump can be removed for cleaning or replacement without the use of a single tool. Lift a tab on the top, give the cartridge a twist and pull it out; that’s all there is to it. The cartridge contains an all-in-one motor/impeller unit with no loose parts. The cartridge line is a further development of SPX Johnson Pump’s acclaimed bilge pumps, which have received highest ratings in many different independent tests over the years.
Features & Benefits
- All-in one motor/impeller unit
- No tools needed for maintenance
- Extremely energy efficient
- Water cooled motor for long service life
- Five models for fifferent capacity needs
- Can be equipped with a float switch for automatic operation
- Meets the strict international standard, ISO 8849 Marine
- Made in the USA
Water Cooled For Extended Service
The cartridge pumps are manufactured in the United States and the new line encompasses five compact pumps, each for a different capacity need. All of them use remarkably little electricity for the amount of water they pump. Their improved, more efficient motors also provide increased service life, thanks in part to an ingenious solution which circulates the discharge water around the motor for cooling.
|
|
464-24DA Bilge Pump 12V 360 GPH
- GPH: 360
- Port Size: 3/4"
- Draw: 2.1A
- Fuse: 2.5A
- Size: 3-1/2"H x 2-3/8"W
Rule 12V Non-Automatic Bilge Pumps require a float or panel switch for operation and feature stainless steel shafts, water cooling and a vibration-free centrifugal impeller. The strainer bases can be snapped off for cleaning. They can run dry without damage and are non-sparking.
|
|
464-25D Bilge Pump 12v 500 GPH
- GPH: 360
- Port Size: 3/4"
- Draw: 1.9A
- Fuse: 2.5A
- Size: 3-1/2"H x 2-3/8"W
Rule 12V Non-Automatic Bilge Pumps require a float or panel switch for operation and feature stainless steel shafts, water cooling and a vibration-free centrifugal impeller. The strainer bases can be snapped off for cleaning. They can run dry without damage and are non-sparking.
|
|
464-25S Bilge Pump Auto 12v 500 GPH
- Size: 4"H x 2-3/8"W
- GPH: 500
- Port Size: 3/4"
- Draw: 1.9A
The Rule 24V Automatic Bilge Pump features computerized operation and does not require a float switch. It has a stainless steel shaft, water cooling and a vibration-free centrifugal impeller. The pump will turn on every 2-1/2 minutes to sense for water, and when water is present the pump will run until the water is removed. The strainer bases can be snapped off for cleaning. It can run dry without damage and are non-sparking.
|
|
464-2535A Bilge Pump w/Switch 500 GPH 12v
Rule 12V Non-Automatic Bilge Pumps with Float Switches are ideal for small boats. They include a Rule-A-Matic float switch and feature a snap-off strainer for cleaning.
- Size: 3-1/2"H x 2-3/8"H
- 35A
|
|
464-20F Square Submersible Pump 800 GPH
Rule 12V Non-Automatic Bilge Pumps require a float or panel switch for operation and feature stainless steel shafts, water cooling and a vibration-free centrifugal impeller. The strainer bases can be snapped off for cleaning. They can run dry without damage and are non-sparking.
- GPH: 800
- Port Size: 3/4"
- Draw: 2.8A
- Size: 4"H x 2-7/8"W
- Square pump
|
|
464-LP900S LP Pro 900 GPH Automatic 12v
Features:
- Size: 9.3"L x 2.3"W x 2.3"H
- Port configurations: Straight: 3/4", 1", 1-1/8" | 90°: 3/4"
- Includes straight and 90° nozzles
The Rule Low Profile 900GPH Auto Bilge Pump features a compact design and can swivel up to 180° for use in tight spaces or odd configurations. It has a threaded discharge nozzle that will couple with either a straight or 90° fitting and is equipped with a tri-cuspid check valve. It also features an auto check that turns on every 2.5 minutes to check for water and will pump when water levels are at 1.3" (low setting) or 2" (high setting).
|
|
464-27D Bilge Pump 12v 1100 GPH
- Size: 4-1/4"H x 2-3/8"W
- GPH: 1100
- Port Size: 1-1/8"
- Draw: 3.3A
Rule 12V Non-Automatic Bilge Pumps require a float or panel switch for operation and feature stainless steel shafts, water cooling and a vibration-free centrifugal impeller. The strainer bases can be snapped off for cleaning. They can run dry without damage and are non-sparking.
|
|
464-27S Bilge Pump Auto 12v 1100 GPH
Rule 12V Automatic Bilge Pumps feature computerized operation and do not require a float switch. They have stainless steel shafts, water cooling and a vibration-free centrifugal impeller. The pump will turn on every 2-1/2 minutes to sense for water, and when water is present the pump will run until the water is removed. The strainer bases can be snapped off for cleaning. They can run dry without damage and are non-sparking.
- GPH: 1100
- Hose Dia.: 1-1/8"
- Draw: 3.3A
- Size: 4-1/2"H x 2-3/8"W
|
|
464-2 Bilge Pump 12v 1500 GPH
Rule 12V Non-Automatic Bilge Pumps require a float or panel switch for operation and feature stainless steel shafts, water cooling and a vibration-free centrifugal impeller. The strainer bases can be snapped off for cleaning. They can run dry without damage and are non-sparking.
- Size: 6"H x 4-1/4"W
- Draw: 4.8A
- GPH: 1500
- Port Size: 1-1/8"
|
|
464-10 Bilge Pump 12v 2000 GPH
Rule 12V Non-Automatic Bilge Pumps require a float or panel switch for operation and feature stainless steel shafts, water cooling and a vibration-free centrifugal impeller. The strainer bases can be snapped off for cleaning. They can run dry without damage and are non-sparking.
- Size: 6"H x 4-1/4"W
- Draw: 8.4A
- GPH: 2000
- Port Size: 1-1/8"
|
|
464-RM500B RuleMate Auto Bilge Pump 500 GPH
- GPH: 500
- Port Size: 3/4"
- Draw: 2.0A
Rule-Mate 12V Automatic Bilge Pumps feature a solid state water sensing technology that senses the dielectric constant of water. The pump will activate when the water level rises to 2-3/4" and will not turn on in the event oil enters the bilge. They do not require a separate float switch. They do feature snap-off strainers and one straight and one 90° hose fittings.
|
|
464-RM1100B RuleMate Auto Bilge Pump 1100 GPH
Rule-Mate 12V Automatic Bilge Pumps feature a solid state water sensing technology that senses the dielectric constant of water. The pump will activate when the water level rises to 2-3/4" and will not turn on in the event oil enters the bilge. They do not require a separate float switch. They do feature snap-off strainers and one straight and one 90° hose fittings
- GPH: 1100
- Port Size: 1-1/8"
- Draw: 3.4A
|
|
464-401FC Tournament L/W Pump 500 GPH "FC"
The Rule Tournament Series Livewell/Aerator Pumps are equipped with several convenient features, like a quick one hand push-button motor cartridge removal system, a rotatable base that positions the discharge nozzle at any location, and threaded nylon hose barb attachments for various hose mounting options. Included with the pumps is a built-in dual port option, water-cooled housing, and a positive snap motor cartridge locking mechanism. The pumps are fitted for transom or seacock mounting options.
|
|
464-403C Tournament L/W Pump 800 GPH "C"
The Rule Tournament Series Livewell/Aerator Pumps are equipped with several convenient features, like a quick one hand push-button motor cartridge removal system, a rotatable base that positions the discharge nozzle at any location, and threaded nylon hose barb attachments for various hose mounting options. Included with the pumps is a built-in dual port option, water-cooled housing, and a positive snap motor cartridge locking mechanism. The pumps are fitted for transom or seacock mounting options.
- C" Tournament Series - Angled Inlet
- 800 GPH
- 3/4" discharge outlet
|
|
