Hardin Marine

Tailpipe Adjustment Wedges - 1/8" x 3/16"
Fits Gil, Hardin Marine, Power Torque and Mercury Hi-Performance

These wedges are used to correct tailpipe angles when systems are changed from one boat to another and don't quite fit correctly. A simple life saver when you just need to adjust your pipe a little one way or the other. Manufactured from 6061-T6 billet aluminum and hard anodized.

Tailpipe Adjustment Wedges - 1/8" x 3/4", Sold in Pairs
Fits Gil, Hardin Marine, Power Torque and Mercury Hi-Performance

These wedges are used to correct tailpipe angles when systems are changed from one boat to another and don't quite fit correctly. A simple life saver when you just need to adjust your pipe a little one way or the other. Manufactured from 6061-T6 billet aluminum and hard anodized.

Tall Aluminum Single Carburetor Air Scoop

This scoop features heavy duty .080 aluminum construction providing durability and strength. Each scoop is welded inside and out to prevent cracking. Then the scoop is polished to a show quality shine that is just incredible. It also features a raised mounting flange providing plenty of clearance for any carburetor. 5-1/2" front height, 4-1/2" rear height, 10" width at bottom, 11" width at top, 15-3/4" length. Flame Arrestor 690-573001A is recommended for use with this scoop. 

Fits: a 4150 series carburetor that has a 5-1/8"neck.

Tall Dual Air Scoop for Dominator 7-1/4" Carburetor Neck

These scoops feature a heavy duty .080 aluminum construction providingdurability and strength Each scoop is welded inside and out to preventcracking Then each air scoop is show polished to provide an incredible shineAll of these scoops feature a raised mounting flange providing plenty ofclearance to any carburetor Must specify carburetor center to center on dualscoops.

Tall Dual Air Scoop for Standard 5-1/8" Carburetor Neck

These scoops feature a heavy duty .080 aluminum construction providing durability and strength Each scoop is welded inside and out to prevent cracking Then each air scoop is show polished to provide an incredible shine. All of these scoops feature a raised mounting flange providing plenty of clearance to any carburetor Must specify carburetor center to center on dual scoops. ****** NOTE SCOOP ONLY FLAME ARRESTORS SOLD SEPARATELY.

Tall Single Air Scoop for Dominator 7-1/4" Carburetor Neck

These scoops feature a heavy duty .080 aluminum construction providingdurability and strength Each scoop is welded inside and out to preventcracking Then each air scoop is show polished to provide an incredible shineAll of these scoops feature a raised mounting flange providing plenty ofclearance to any carburetor Must specify carburetor center to center on dualscoops.

Terminal Block Only

These marine grade terminal blocks offer secure connections of the vital instrument wiring in your boat. Measures 5.5" x 1.375"

Terminal Block Style Complete Boat Wiring Harness - 20 Foot Wired For Voltmeter

Wiring your boat doesn't have to be a hassle due to tangled wires, bad connections, and guess work. Poor wiring can ruin a boat these boat harnesses use 275 degree, thermal crossed linked wire that won't kink and is abrasive resistant. Don't take chances with your boat; trust the leader in marine wiring, Hardin Marine.

Note: Uses 14 AWG wire

Terminal Block Style Marine Engine Wiring Harness - 460 Ford

Wiring your boat's engine can be simple and easy. Take the frustration out of bad connections. These weather proof correct fit engine harnesses make the perfect choice for a new boat or to update an old boat. Save time and money with the right harness. NOTE: Bracket is universal fit and may require bushings or washers on one side of the bracket when mounting (not included).

Note: Uses 14 AWG wire

Terminal Block Style Marine Engine Wiring Harness - Big Block/Small Block Chevy

Wiring your boat's engine can be simple and easy. Take the frustration out of bad connections. These weather proof correct fit engine harnesses make the perfect choice for a new boat or to update an old boat. Save time and money with the right harness. NOTE: Bracket is universal fit and may require bushings or washers on one side of the bracket when mounting (not included).

Note: Uses 14 AWG wire

Terminal Block Style Marine Engine Wiring Harness - Oldsmobile

Wiring your boat's engine can be simple and easy. Take the frustration out of bad connections. These weather proof correct fit engine harnesses make the perfect choice for a new boat or to update an old boat. Save time and money with the right harness. NOTE: Bracket is universal fit and may require bushings or washers on one side of the bracket when mounting (not included).

Note: Uses 14 AWG wire

Brass T-Handle Twist-In Drain Plug

We carry all of the popular twist-in drain plugs from original aluminum drain plugs to stainless and brass plugs. This is a brass plug.

Stainless T-Handle Twist-In Drain Plug

We carry all of the popular twist-in drain plugs from original aluminum drain plugs to stainless and brass plugs. This plug is stainless steel and does not include a chain or cable.

• Made from Stainless Steel
• 2" Outside Diameter
• 1/2" NPT Plug
• Need 1" Hole to mount.
• Use Silicone sealant to mount.

Three Point Bellhousing Strap

Replacement Strap for the 3 point bellhousing.

center to center measurment: 6-3/8"

Mayfair Electronics by Hardin Marine and Marine Design Corp have teamed up to bring the new generation of the Heads-Up indicator system to the marine industry. This new heads up indicator system does away with cables and converts digital electronic signals to operate actuators on the display. Carbon Fiber cover plates with powdercoated bezels in multiple colors. Indicators come standard with black sticks with engraved white writing. Optional LED lit clear lexan sticks with black writing are an available options.

Mayfair electronics by Hardin Marine brings the newest generation of the Heads-Up indicator system to the marine industry. Featuring Carbon Fiber cover plates with powdercoated bezels in multiple colors. Indicators come standard with black sticks with engraved white writing. The mechanical version uses the common 33c cable to operate the sticks for simple reliable operation.

33C Throttle Cable Installation Kit

• -10 AN Style Fitting
• Outer Diameter 1-1/16"
• Overall Length 2-3/8"
• Polished Stainless Steel.
• Includes Nut.

• -8 AN Style Fitting.
• Outer Diameter 1"
• Overall Length 2-5/16"
• Polished Stainless Steel.
• Includes nut.

Mayfair By Hardin Marine Helms - 5-1/2", 7-1/2", 9-1/2", 11-1/2" and 13-1/2" Tilt Steering Post Assemblies for Char-Lynn Helm

The construction of these tiltable, race inspired stainless steel and billet aluminum helms feature an adjustable slip collar to accommodate different dash thicknesses while providing the ultimate in finished appearance.  These steering posts bolt directly to a Char-Lynn hydraulic helm. Available in 5 lengths Available in a dual steering wheel bolt pattern (Momo or Dino).  Length is from the dash to the steering wheel mounting flange based on a 1" thick dash. Center steering wheel cover sold separately. Black Char-Lynn Helm unit shown on bottom is sold separately! Note: Standard 5-1/2" unit is all Stainless Steel, while all other extended length models have a stainless steel base unit and billet aluminum post.

Mayfair By Hardin Marine Helms - 5-1/2", 7-1/2", 9-1/2", 11-1/2" and 13-1/2" Tilt Steering Post Assemblies for Dan Foss Helm

The construction of these tiltable, race inspired all stainless steel helms feature an adjustable slip collar to accommodate different dash thicknesses while providing the ultimate in finished appearance.  These steering posts bolt directly to a Char-Lynn hydraulic helm.  Available in a dual steering wheel bolt pattern (Momo or Dino).  Length is from the dash to the steering wheel mounting flange based on a 1" thick dash. Center steering wheel cover sold separately. Black Dan Foss Helm Unit shown on bottom is sold separately! Note: Standard 5-1/2" unit is all Stainless Steel, while all other extended length models have a stainless steel base unit and billet aluminum post.

Timing Chain Kit

This kit fits .400 raised cam blocks.

Titan Power Steering Reservoir

Hardin Marine, Powerboating's leader in hydraulic performance steering systems has designed the ultimate in power steering fluid control. These new Billet Aluminum/Lexan reservoirs provide a strong durable construction. The clear see through body provides easy, quick, visible oil level conditions. The ability to remotely deliver fluid to the power steering pump while allowing a baffled return port to limit aeration of your hydraulic steering fluid makes for easy plumbing.

Length: 6-3/4" x Width: 5-7/8" x Height: 9"

Top Mount Replacement Prestolite 3-bolt Starter

This starter is used on many known jet engine manufacturers (Indmar, Hardin, etc). This is a reverse rotation starter so it can start your standard rotation motor. This is a high torque mini starter, good up to 18:1 compression engines. The starter weighs 8lbs. Replaces Prestolite #'s MDU 7016, 7022, 7033. Fits into a 3" bellhousing opening. Starter gear kicks out 0.500"

USCG Approved (SAE J1171)