Generic

Convenience of built-in switch in lens allows you to just push the lens to turn the light on or off.

• Can be surface or flush mounted


• Flush Mount Bezel Included

• Can be surface or flush mounted


• Flush Mount Bezel Included

Size: 5" x 3-1/8", LED Color: White, Volts: 12, Amps: 0.4, Watts: 5

Sold: Each

Great for lighting a small area.

• Super easy Installation - drill a hole and push in


• No nut in back

• Super easy Installation - drill a hole and push in


• No nut in back

Size: 1-1/8" x 3/4", Bezel: Stanless Steel, LED Color: White

Great for lighting a small area.

• Super easy Installation - drill a hole and push in


• No nut in back

• Super easy Installation - drill a hole and push in


• No nut in back

Size: 1-1/8" x 3/4", Bezel: Stanless Steel, LED Color: Blue

These surface mount LED utility strip lights are great for lighting or decorating the interior and exterior of boats, RVs and other vehicles. Being 100% waterproof, they can be used virtually anywhere. The circuit board is completely sealed in epoxy to resist water, corrosion and vibration. Low amp draw for longer battery life. Clear lens provides maximum light.

LEDs: 12 White

Sold: Each

"

• Built-in switch - push lens for "On/Off"


• 12 Volt- 5 Watt - tin wire


• Oval hole - 3 1/4" x 2 1/8"


• Flange overall - 5" x 3 1/8"

• Built-in switch - push lens for "On/Off"


• 12 Volt- 5 Watt - tin wire


• Oval hole - 3 1/4" x 2 1/8"


• Flange overall - 5" x 3 1/8"

Color: Black

"

• Built-in switch - push lens for "On/Off"


• 12 Volt- 5 Watt - tin wire


• Oval hole - 3 1/4" x 2 1/8"


• Flange overall - 5" x 3 1/8"

• Built-in switch - push lens for "On/Off"


• 12 Volt- 5 Watt - tin wire


• Oval hole - 3 1/4" x 2 1/8"


• Flange overall - 5" x 3 1/8"

Color: White

These surface mount LED utility strip lights are great for lighting or decorating the interior and exterior of boats, RVs and other vehicles. Being 100% waterproof, they can be used virtually anywhere. The circuit board is completely sealed in epoxy to resist water, corrosion and vibration. Low amp draw for longer battery life. Clear lens provides maximum light.

LEDs: 18 White

Sold: Each

A: 1-5/8", B: 2-5/8", C: 7/8", D: 3/4", E: 1", Pack: Carded

High quality UV and chemical resistant virgin polypropelene. Features a finished head and a single pass around nut.

A: 1-1/2", B: 2-1/2", C: 1", D: 3/4", E: 1", Pack: Carded

Sold: Each

High quality UV and chemical resistant virgin polypropelene. Features a finished head and a single pass around nut.

A: 1-7/8", B: 3-1/2", C: 1-1/8", D: 1-1/8", E: 1-3/8", Pack: Carded

Sold: Each

High quality UV and chemical resistant virgin polypropelene. Features a finished head and a single pass around nut.

A: 2-7/8", B: 4-1/4", C: 1-5/8", D: 1-1/2", E: 2", Pack: Carded

Sold: Each

Size: 10" x 20"

"A low cost method to drain water from virtually anywhere. They have a very low profile head to allow complete drainage. Drains mount easily in a 1-3/8" diameter hole and are secured with the molded nut that is included. Hose barbs fit 3/4" hose for routing of drainage."

:

Sold: Each

This high-tech, high-speed, one piece design features an innovative Rod and Slot lift system to handle the stresses from the heaviest and most powerful V6 outboards on the market. All hydraulics are built into the jack, eliminating the installation of pumps and reservoirs inside the transom as well as hydraulic hoses running through the transom. The high-tech engineered polymer rods are 6 times more abrasion resistant than steel and are manufactured from self-lubricating material. Lifts from top to bottom in 8 seconds and installs in half the time of comparable jacks. Handles all outboards including the powerful Verado V6 motors.

Setback: 10"

This high-tech, high-speed, one piece design features an innovative Rod and Slot lift system to handle the stresses from the heaviest and most powerful V6 outboards on the market. All hydraulics are built into the jack, eliminating the installation of pumps and reservoirs inside the transom as well as hydraulic hoses running through the transom. The high-tech engineered polymer rods are 6 times more abrasion resistant than steel and are manufactured from self-lubricating material. Lifts from top to bottom in 8 seconds and installs in half the time of comparable jacks. Handles all outboards including the powerful Verado V6 motors.

Setback: 12"

This high-tech, high-speed, one piece design features an innovative Rod and Slot lift system to handle the stresses from the heaviest and most powerful V6 outboards on the market. All hydraulics are built into the jack, eliminating the installation of pumps and reservoirs inside the transom as well as hydraulic hoses running through the transom. The high-tech engineered polymer rods are 6 times more abrasion resistant than steel and are manufactured from self-lubricating material. Lifts from top to bottom in 8 seconds and installs in half the time of comparable jacks. Handles all outboards including the powerful Verado V6 motors.

Setback: 8"

"The smallest and lightest hydraulic jack on the market is ideal for shallow water skiffs and flats boats. It has a footprint of only 14-5/8" W x 11-1/2" H with a weight of only 23 lbs. The strong, self-contained actuator takes only 8 seconds to go from top to bottom and has 5" of travel. 3 mounting hole options on the transom side and 2 on the engine side. Optional adapter available to accommodate clamp-on outboard motors if needed."

Setback: 4", Application: 115hp

Sold: Each

"Digital LED position gauges fit Atlas hydraulic jack plates. Numbers range from 0-20 and each number indicates a 1/4" rise. Atlas jack plates are predrilled to accept sensors."

Fits: 4" and 8" Models", Color: Black w/SS Bezel

"Digital LED position gauges fit Atlas hydraulic jack plates. Numbers range from 0-20 and each number indicates a 1/4" rise. Atlas jack plates are predrilled to accept sensors."

Fits: 6", 10" and 12" Models", Color: Black w/Black Bezel

"Digital LED position gauges fit Atlas hydraulic jack plates. Numbers range from 0-20 and each number indicates a 1/4" rise. Atlas jack plates are predrilled to accept sensors."

Fits: 6", 10" and 12" Models", Color: Black w/SS Bezel