462-232-NBH31SSCOPT
- Shaped inserts fit both Optima®D27M and D31M series
- Rugged poly tray with 8 mounting slots
- Poly strap with stainless steel buckle
- Resistant to UV and corrosion
|
|
462-232-BK1DP "Bolt kit for mounting outboard engine to jack plates. Kit contains:
- 4 each 1/2"-13 x 3" long bolts - stainless steel
- 4 each 1/2"-13 lock nuts - brass with nylon insert
- 8 each 1/2"-flat washers - stainless steel
"" - 4 each 1/2"-13 x 3" long bolts - stainless steel
- 4 each 1/2"-13 lock nuts - brass with nylon insert
- 8 each 1/2"-flat washers - stainless steel
" : Sold: Pack
|
|
462-232-TH1590CPDP High quality UV and chemical resistant virgin polypropelene. Features a finished head and a single pass around nut. A: 2-7/8", B: 4-1/4", C: 1-5/8", D: 1-1/2", E: 2", Pack: Carded Sold: Each
|
|
462-232-TH1290CPDP High quality UV and chemical resistant virgin polypropelene. Features a finished head and a single pass around nut. A: 1-7/8", B: 3-1/2", C: 1-1/8", D: 1-1/8", E: 1-3/8", Pack: Carded Sold: Each
|
|
462-232-TH7590CPDP High quality UV and chemical resistant virgin polypropelene. Features a finished head and a single pass around nut. A: 1-1/2", B: 2-1/2", C: 1", D: 3/4", E: 1", Pack: Carded Sold: Each
|
|
462-232-BSR1KDP "Distributes strain from bends in the hose. Watertight gripper fitting-no leaks. Flange is 2-3/4" diameter and requires 1-1/4" installation hole." : Sold: Each
|
|
462-232-CB4DP Provides a fully open area to pass wiring and cables through and when rigging is complete. Constructed of rugged black vinyl that resists UV rays, gasoline and oil. Description: 4-1/2" Cable Boot", Pack: Card Sold: Each
|
|
462-232-CS1DP Molded, UV and weather resistant. Color: Black, Size: 9/16" x 1-7/8", Pack: 2, Case: 12 Sold: Pack
|
|
462-232-CS2DP Molded, UV and weather resistant. Color: White , Size: 9/16" x 1-7/8", Pack: 2, Case: 12
|
|
462-232-CSS1DP Molded, UV and weather resistant. Color: Black , Size: 7/16" x 7/8", Pack: 2, Case: 12 Sold: Pack
|
|
462-232-CSD92DP - The check ball provides better sealing against reverse water flow that occurs when backing boat.
- Injection molded part is high strength and UV stabilized to provide value and durability
- Top of cockpit scupper drain is removable for cleaning
- 90° Outlet
Hole: 2-1/2" dia., Flange: 3-9/16", Fits: 1-1/2" Hose - The check ball provides better sealing against reverse water flow that occurs when backing boat.
- Injection molded part is high strength and UV stabilized to provide value and durability
- Top of cockpit scupper drain is removable for cleaning
- 90° Outlet
|
|
462-232-DP1DP A screw-type plug made of black nylon and features an O-ring for tight sealing. Fine thread insures sealing under high vibration and prevents cross threading. Mounts in a 1" diameter hole. Black nylon. Color: Black, Material: Nylon, Case: 12 A screw-type plug made of black nylon and features an O-ring for tight sealing. Fine thread insures sealing under high vibration and prevents cross threading. Mounts in a 1" diameter hole.
|
|
462-232-DBH27PDP "Holds two Series 27 deep cycle batteries side by side. Patented poly strap with quick release buckle. Meets all NMMA specs for battery retention. 14-1/2" L x 13-1/8"W x 1" H."
Description: Dual Battery Holder, Fits: Group 27
Sold: Each
|
|
462-232-MAGHL2DP
- Powerful magnetic attraction
- Holds lids and doors securely
- Encased in plastic ? won't rust or corrode
|
|
462-232-LEDSMSLC6WT Mounting channel for Flex Rope LED rope lighting. Includes hi-strength 3M adhesive back mounting tape.
Description: Channel Mount, adhesive backed, Length: 6'
Sold: Each
|
|
462-232-SA1DP "Mounts over 1" to 1-1/4" drain tubes
Grooved inside to fit over drain flange" " - Mounts over 1" to 1-1/4" drain tubes
- Grooved inside to fit over drain flange
" Color: Black Sold: Each
|
|
462-232-SA2BDP "Mounts over 1" to 1-1/4" drain tubes
Grooved inside to fit over drain flange" " - Mounts over 1" to 1-1/4" drain tubes
- Grooved inside to fit over drain flange
" Color: White Sold: Each
|
|
462-232-GFHCA1RDP This trolling motor replacement release & lift system is a rugged, nylon jacketed stainless steel cable with a large comfortable cushioned grip handle which solves the problem of the cheap lift & release ropes on today's trolling motors. Fits most models and makes of trolling motors.
This is a G-Force handle for the latest in digital / wireless trolling motors that attaches with a clamp on the shaft of the trolling motor. This clamp on model is designed to fit Minn Kota Terrova, Riptide, and Auto Pilot , as well as the MotorGuide Xi5.
|
|
462-232-GFELMKSB + Option(s) Designed to lessen prop noise and vibration, The Eliminator™ Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.
Will not work with Kipawa and Hydrilla Hacker Props
Colors: Black or Blue, For: Minn Kota 35-70
|
|
462-232-GFELMKB + Option(s) Designed to lessen prop noise and vibration, The Eliminator™ Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.
Will not work with Kipawa and Hydrilla Hacker Props
Colors: Black or Blue, For: Minn Kota 80, 101, 112
|
|
