462-114-041245 "Tanks are designed for water or waste and meet all USCG standards. Each tank provides standard NPT openings for vent, fill & drain and the molded, FDA approved liners will not filter taste into water or emit waste odors. All tanks meet FDA spec CFT177.1520 requirements and feature a nominal wall thickness of 0.300". Note: 041239 tank measures 21.50"W at the top and 19.75"W at the bottom.Molded of FDA approved linear polyethylene which meets the CFR 177.1520 criteria." Gals.: 44, Size: 35-1/4" L x 20-7/8" W x 15-1/4" H"
|
|
462-23-41404 This submersible pump is a great way to remove unwanted water from boats, pool covers, aquariums and sump pits. Convenient and safe because it needs no electrical cord. It runs up to 5 hours on three alkaline "D" batteries. Lifts water up to 40" and includes a 42" hose with garden hose adapter. Not for use as a permanent bilge pump.
GPH: 200, Size: 6-3/8" H x 5-1/4" Dia.
|
|
464-420552-1 WATERPRF INLINE FUSE HOLDER 10A
The Seadog Watertight Inline Fuse Holders have a snap tight connection for a watertight seal. Each holder comes with a standard 1/4" x 1-1/4" glass fuse.
|
|
464-420553-1 Waterproof Inline Fuse Holder 15A
The Seadog Watertight Inline Fuse Holders have a snap tight connection for a watertight seal. Each holder comes with a standard 1/4" x 1-1/4" glass fuse.
|
|
464-420554-1 Waterproof Inline Fuse Holder 20A
The Seadog Watertight Inline Fuse Holders have a snap tight connection for a watertight seal. Each holder comes with a standard 1/4" x 1-1/4" glass fuse.
|
|
464-420555-1 WATERPRF INLINE FUSE HOLDER 30A
The Seadog Watertight Inline Fuse Holders have a snap tight connection for a watertight seal. Each holder comes with a standard 1/4" x 1-1/4" glass fuse.
|
|
462-354-4261841 Molded black plastic with jacketed lead wires and a weather tight cover. Mounts flush. 1 per card. 10 gauge/2 wire. Description: Plug Sold: Each
|
|
462-354-4261831 Molded black plastic with jacketed lead wires and a weather tight cover. Mounts flush. 1 per card. 10 gauge/2 wire. Description: Receptacle Sold: Each
|
|
462-36-HBL74CM25WOA Yellow polycarbonate. Spring loaded. For weatherproofing old style 26CM10 receptacle. Meets the most stringent requirements of UL's three listing categories for weatherproof plates. Stainless steel screws and neoprene gasket included for mounting to FS/FD type weatherproof boxes.
Description: Fits Current 26CM10 Receptacle
Sold: Each
|
|
462-274-203315 "Sonically-sealed, impact-resistant polycarbonate red lens and housing ensure a waterproof module
Meet or exceed all applicable state and federal regulations specified for vehicles 80" wide or wider
Three sealed polycarbonate lamps on 6" centers lead to a stainless steel base" " - Sonically-sealed, impact-resistant polycarbonate red lens and housing ensure a waterproof module
- Meet or exceed all applicable state and federal regulations specified for vehicles 80" wide or wider
- Three sealed polycarbonate lamps on 6" centers lead to a stainless steel base
" Size: 14-1/2" L x 1-1/8" H x 1" D" Sold: Each
|
|
518-212 Waterproof Marine Stereo Housing - White ABS Safeguard your receiver from weather and water sprays. The watertight bezel and cover provide extra protection against harsh marine environments. • Recessed design accomodates most 1.0 DIN head units • Transparent fold-down door with rubber seal • Can be mounted hinge up or down • Concealed stainless steel mounting hardware included • EVA foam mounting gasket • High-temp and UV-resistant ABS polymer construction • Overall dimensions: 9.82" x 4.36" x 1.57" |
|
462-698-LD4000 "Provide easy access to storage space. Approved for use in lifeboats, reliable watertight seal, all plastic. Splashproof, Nitrile rubber seal. Dia. 9-1/4". Aperture Dia: 7"."
ID: 7", OD: 9-1/4", Color: Black
Sold: Each
|
|
625-4306 Wear Plate Gen 8 Sea Pump with Gen 1 Rear Cap
|
|
625-4310 Wear Plate Gen 8 Sea Pump with Gen 2 Rear Cap
|
|
625-4274 This replaces Mercury OEM P/N #840052
|
|
625-4081 Wear Plate, Internal - Gen I
|
|
160-14-1447-60 Wear Ring Self-Tapping Screws
|
|
462-661-4150 Weatherdeck Toggle Switch, Off/On
"
- Use with Weatherdeck™ waterproof panel. Nickel-plated brass and phenolic non-corrosive construction. On in parenthesis (On) indicates a momentary postion.
- Rated 15A @ 32V DC or 125V AC, 10A @ 250V AC.
- On in parenthesis (On) indicates a momentary postion.
- Terminal :.25" Tab
"
Positions: Off/On, Type: SPST
Sold: Each
|
|
462-661-4304 Water resistant to IP67. Constructed from corrosion resistant materials. Concealed mounting screw holes. Integrated switch guards prevent accidental switching. UV tested faceplate. Rugged UV rated waterproof boots. Panel can be mounted in four different orientations. Illuminated circuit labels provide visibility in low light conditions. Bi-colored LED's. Panel cumulative rating of 45 amperes. Positions: 4, Color: Gray, Size: 4.3" H x 3.88" W
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> Yellow polycarbonate. Spring loaded. For weatherproofing old style 26CM10 receptacle. Meets the most stringent requirements of UL's three listing categories for weatherproof plates. Stainless steel screws and neoprene gasket included for mounting to FS/FD type weatherproof boxes. Description: Fits Old Style 26CM10 Receptacle Sold: Each
|
|
