Generic

Use for engine heater, heat exchanger, and A/C circulation applications. Also good for sink, icebox, shower and livewell drain lines and heavy duty toilet intake hose. EPDM tube and cover, fabric reinforced. Resistant to: mild chemicals, heat, cold, ozone, saltwater. Temperature range: -40°F to +190°F.

ID: 5/8", OD: 7/8", Length: 50', Working Pressure: 62 psi

Todd's one piece molded water/holding tanks are tough and durable. Each tank fully complies with FDA regulation CFR 177.1520. Each tank satisfies all U.S.C.G. standards. SURPASS material tanks will not emit waste odors or change the taste of fresh potable water. All openings are female NPT (National Pipe Threads) and are located in the same relative position on one end of the tank. Supplied plugs make water tank or holding tanks complete. Instructions included.

Gals.: 55, Size: 54-1/2" L x 13" W x 20" H"

Sold: Each

Todd's one piece molded water/holding tanks are tough and durable. Each tank fully complies with FDA regulation CFR 177.1520. Each tank satisfies all U.S.C.G. standards. SURPASS material tanks will not emit waste odors or change the taste of fresh potable water. All openings are female NPT (National Pipe Threads) and are located in the same relative position on one end of the tank. Supplied plugs make water tank or holding tanks complete. Instructions included.

Gals.: 13, Size: 24" L x 10" W x 14" H"

Sold: Each

Todd's one piece molded water/holding tanks are tough and durable. Each tank fully complies with FDA regulation CFR 177.1520. Each tank satisfies all U.S.C.G. standards. SURPASS material tanks will not emit waste odors or change the taste of fresh potable water. All openings are female NPT (National Pipe Threads) and are located in the same relative position on one end of the tank. Supplied plugs make water tank or holding tanks complete. Instructions included.

Gals.: 15, Size: 25" L x 11" W x 15" H"

Sold: Each

Todd's one piece molded water/holding tanks are tough and durable. Each tank fully complies with FDA regulation CFR 177.1520. Each tank satisfies all U.S.C.G. standards. SURPASS material tanks will not emit waste odors or change the taste of fresh potable water. All openings are female NPT (National Pipe Threads) and are located in the same relative position on one end of the tank. Supplied plugs make water tank or holding tanks complete. Instructions included.

Gals.: 20, Size: 30" L x 16" W x 10" H"

Sold: Each

Todd's one piece molded water/holding tanks are tough and durable. Each tank fully complies with FDA regulation CFR 177.1520. Each tank satisfies all U.S.C.G. standards. SURPASS material tanks will not emit waste odors or change the taste of fresh potable water. All openings are female NPT (National Pipe Threads) and are located in the same relative position on one end of the tank. Supplied plugs make water tank or holding tanks complete. Instructions included.

Gals.: 25, Size: 37" L x 17-1/2" W x 10" H"

Sold: Each

Todd's one piece molded water/holding tanks are tough and durable. Each tank fully complies with FDA regulation CFR 177.1520. Each tank satisfies all U.S.C.G. standards. SURPASS material tanks will not emit waste odors or change the taste of fresh potable water. All openings are female NPT (National Pipe Threads) and are located in the same relative position on one end of the tank. Supplied plugs make water tank or holding tanks complete. Instructions included.

Gals.: 35, Size: 36" L x 15-1/2" W x 16" H"

Sold: Each

Todd's one piece molded water/holding tanks are tough and durable. Each tank fully complies with FDA regulation CFR 177.1520. Each tank satisfies all U.S.C.G. standards. SURPASS material tanks will not emit waste odors or change the taste of fresh potable water. All openings are female NPT (National Pipe Threads) and are located in the same relative position on one end of the tank. Supplied plugs make water tank or holding tanks complete. Instructions included.

Gals.: 3, Size: 14" L x 11" W x 6-1/2" H"

Sold: Each

Todd's one piece molded water/holding tanks are tough and durable. Each tank fully complies with FDA regulation CFR 177.1520. Each tank satisfies all U.S.C.G. standards. SURPASS material tanks will not emit waste odors or change the taste of fresh potable water. All openings are female NPT (National Pipe Threads) and are located in the same relative position on one end of the tank. Supplied plugs make water tank or holding tanks complete. Instructions included.

Gals.: 6, Size: 16" L x 12" W x 8" H"

Sold: Each

Todd's one piece molded water/holding tanks are tough and durable. Each tank fully complies with FDA regulation CFR 177.1520. Each tank satisfies all U.S.C.G. standards. SURPASS material tanks will not emit waste odors or change the taste of fresh potable water. All openings are female NPT (National Pipe Threads) and are located in the same relative position on one end of the tank. Supplied plugs make water tank or holding tanks complete. Instructions included.

Gals.: 9, Size: 17" L x 14" W x 10" H"

Sold: Each

"Tanks are designed for water or waste and meet all USCG standards. Each tank provides standard NPT openings for vent, fill & drain and the molded, FDA approved liners will not filter taste into water or emit waste odors. All tanks meet FDA spec CFT177.1520 requirements and feature a nominal wall thickness of 0.300". Note: 041239 tank measures 21.50"W at the top and 19.75"W at the bottom.Molded of FDA approved linear polyethylene which meets the CFR 177.1520 criteria."

Gals.: 23, Size: 23-1/2" L x 20" W x 15-1/2" H"

"Tanks are designed for water or waste and meet all USCG standards. Each tank provides standard NPT openings for vent, fill & drain and the molded, FDA approved liners will not filter taste into water or emit waste odors. All tanks meet FDA spec CFT177.1520 requirements and feature a nominal wall thickness of 0.300". Note: 041239 tank measures 21.50"W at the top and 19.75"W at the bottom.Molded of FDA approved linear polyethylene which meets the CFR 177.1520 criteria."

Gals.: 24, Size: 29-1/2" L x 16-5/8" W x 12-3/4" H"

"Tanks are designed for water or waste and meet all USCG standards. Each tank provides standard NPT openings for vent, fill & drain and the molded, FDA approved liners will not filter taste into water or emit waste odors. All tanks meet FDA spec CFT177.1520 requirements and feature a nominal wall thickness of 0.300". Note: 041239 tank measures 21.50"W at the top and 19.75"W at the bottom.Molded of FDA approved linear polyethylene which meets the CFR 177.1520 criteria."

Gals.: 44, Size: 35-1/4" L x 20-7/8" W x 15-1/4" H"

This submersible pump is a great way to remove unwanted water from boats, pool covers, aquariums and sump pits. Convenient and safe because it needs no electrical cord. It runs up to 5 hours on three alkaline "D" batteries. Lifts water up to 40" and includes a 42" hose with garden hose adapter. Not for use as a permanent bilge pump.
GPH: 200, Size: 6-3/8" H x 5-1/4" Dia.

WATERPRF INLINE FUSE HOLDER 10A

The Seadog Watertight Inline Fuse Holders have a snap tight connection for a watertight seal. Each holder comes with a standard 1/4" x 1-1/4" glass fuse.

• 10 Amp - 16 wire gauge

Waterproof Inline Fuse Holder 15A

The Seadog Watertight Inline Fuse Holders have a snap tight connection for a watertight seal. Each holder comes with a standard 1/4" x 1-1/4" glass fuse.

• 15 Amp - 14 wire gauge

Waterproof Inline Fuse Holder 20A

The Seadog Watertight Inline Fuse Holders have a snap tight connection for a watertight seal. Each holder comes with a standard 1/4" x 1-1/4" glass fuse.

• 20 Amp - 12 wire gauge

WATERPRF INLINE FUSE HOLDER 30A

The Seadog Watertight Inline Fuse Holders have a snap tight connection for a watertight seal. Each holder comes with a standard 1/4" x 1-1/4" glass fuse.

• 30 Amp - 10 wire gauge

Molded black plastic with jacketed lead wires and a weather tight cover. Mounts flush. 1 per card. 10 gauge/2 wire.

Description: Plug

Sold: Each

Molded black plastic with jacketed lead wires and a weather tight cover. Mounts flush. 1 per card. 10 gauge/2 wire.

Description: Receptacle

Sold: Each