625-8828 In the world of professional offshore powerboat racing the top teams are always looking for ways to save weight without sacrificing performance and durability Hardin Marine knows there is no better way to test a product than to expose it to the abuses and demands of full blown racing While tested in extreme conditions these mounts are still right at home in a recreational pleasure boat.
While bearing the same nominal measurements as the factory Mercury Racing engine mounts that’s where the similarities end. These engine mounts are CNC machined from aero space grade 6061-T6 billet aluminum. Front mounts feature our exclusive billet engine block mounting pads. These pads form a structural bridge like connection to the base of the engine mount. They also provide for an optional speedy engine removal option while the base mount stays in the boat.Next the mounts are machined to accept precision stainless steel bushings in the mounting hole locations to ensure a secure fit and prevent premature wear. After construction of the mounts they are then black hard coat anodized for corrosion resistance and long life.
So if your looking for the strongest and lightest engine mount option (half the weight of conventional steel mounts) then there is no better choice than these mounts. Available in 4 configurations, the shipping mounts are commonly used in catamaran hulls, while the staggered or side by side mounts are perfect for vee bottom installations.
NOTE: THESE ARE RAW FINISH
|
|
625-8827 In the world of professional offshore powerboat racing the top teams are always looking for ways to save weight without sacrificing performance and durability Hardin Marine knows there is no better way to test a product than to expose it to the abuses and demands of full blown racing While tested in extreme conditions these mounts are still right at home in a recreational pleasure boat.
While bearing the same nominal measurements as the factory Mercury Racing engine mounts that’s where the similarities end. These engine mounts are CNC machined from aero space grade 6061-T6 billet aluminum. Front mounts feature our exclusive billet engine block mounting pads. These pads form a structural bridge like connection to the base of the engine mount. They also provide for an optional speedy engine removal option while the base mount stays in the boat.Next the mounts are machined to accept precision stainless steel bushings in the mounting hole locations to ensure a secure fit and prevent premature wear. After construction of the mounts they are then black hard coat anodized for corrosion resistance and long life.
So if your looking for the strongest and lightest engine mount option (half the weight of conventional steel mounts) then there is no better choice than these mounts. Available in 4 configurations, the shipping mounts are commonly used in catamaran hulls, while the staggered or side by side mounts are perfect for vee bottom installations.
NOTE: THESE ARE RAW FINISH
|
|
625-8821 Xtreme Billet Aluminum Engine Mounts - Big Block Chevrolet Rear Side By Side Mount
(Twin Engine)
In the world of professional
offshore powerboat racing the top teams are always looking for ways to
save weight without sacrificing performance and durability. Hardin
Marine knows there is no better way to test a product than to expose it to
the abuses and demands of full blown racing. After hours of
competition these Xtreme aluminum engine mounts have passed the test with
flying colors. CNC machined from 6061-T6 billet aluminum and black
hard coat anodized to prevent corrosion, these mounts are half the weight
of conventional steel mounts. Complete with stainless steel
fasteners each mounting hole has a stainless steel bushing to ensure a
secure fit and prevent premature wear. Available in 3
configurations, the front shipping mounts are commonly used in catamaran
hulls, while the staggered or side by side mounts are perfect for vee
bottom installations. A convenient option on the rear engine mounts
is an upper plate extension to mount the engines starter relay, wiring
harness plug and MSD box or coil.
NOTE: THESE ARE RAW FINISH
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> Xtreme Billet Aluminum Rear Shipping Engine Mount
In the world of professional offshore powerboat racing the top teams are
always looking for ways to save weight without sacrificing performance and
durability Hardin Marine knows there is no better way to test a product than to
expose it to the abuses and demands of full blown racing After hours of
competition these Xtreme aluminum engine mounts have passed the test with flying
colors CNC machined from 6061-T6 billet aluminum and black hard coat anodized
to prevent corrosion, these mounts are half the weight of conventional steel
mounts Complete with stainless steel fasteners each mounting hole has a
stainless steel bushing to ensure a secure fit and prevent premature wear.
Available in 3 configurations, the shipping mounts are commonly used in
catamaran hulls, while the staggered or side by side mounts are perfect for vee
bottom installations. A convenient option on the rear engine mounts is an upper
plate extension to mount the engines starter relay, wiring harness plug and MSD
box or coil.
NOTE: THESE ARE STANDARD RAW FINISH, LIMITED QUANTITIES AVAILABLE ANODIZED BLACK
|
|
625-8822 Xtreme Billet Aluminum Rear Staggered Engine Mount
In the world of professional offshore powerboat racing the top teams are
always looking for ways to save weight without sacrificing performance and
durability Hardin Marine knows there is no better way to test a product than to
expose it to the abuses and demands of full blown racing After hours of
competition these Xtreme aluminum engine mounts have passed the test with flying
colors CNC machined from 6061-T6 billet aluminum and black hard coat anodized
to prevent corrosion, these mounts are half the weight of conventional steel
mounts Complete with stainless steel fasteners each mounting hole has a
stainless steel bushing to ensure a secure fit and prevent premature wear.
Available in 3 configurations, the shipping mounts are commonly used in
catamaran hulls, while the staggered or side by side mounts are perfect for vee
bottom installations. A convenient option on the rear engine mounts is an upper
plate extension to mount the engines starter relay, wiring harness plug and MSD
box or coil.
NOTE: THESE ARE RAW FINISH
|
|
This Part has options, please click the button below to order.
525-849143T Mercruiser Engine Mount 849143T
Supercedes: 49863, 816301, 817370, 849143, 849143T
|
|
This Part has options, please click the button below to order.
525-849310T Mercruiser Engine Mount 849310T
Supercedes: 49865, 498651, 816308, 816308T, 849310T
|
|
This Part has options, please click the button below to order.
525-847786T Mercruiser Engine Mount 847786T
Supercedes: 814936, 847786
|
|
This Part has options, please click the button below to order.
525-847808T Mercruiser Engine Mount 847808T
Supercedes: 49866, 498661, 816309, 847808, 847808T
|
|
This Part has options, please click the button below to order.
525-849335T Mercruiser Engine Mount 849335T
Supercedes: 88665, 886651, 816307, 816307T, 849335T
|
|
This Part has options, please click the button below to order.
525-849339T Mercruiser Engine Mount 849339T
Supercedes: 816303, 817367, 817367T, 817367T
|
|
This Part has options, please click the button below to order.
525-866708T01 Mercruiser Engine Mount 866708T01
|
|
This Part has options, please click the button below to order.
525-844346T MOUNT-ENGINE Mercruiser 844346T
|
|
This Part has options, please click the button below to order.
525-866711 ENGINE MOUNT ASSY Mercruiser 866711
|
|
676-18-2193 Additional Details:
- Fits: MCM flywheel housing with Alpha and Bravo drives
Interchanges/ReplacesGLMMalloryMercruiser Stern Drive- 33149
- 865329A02
- 8M0103028
- 99297A1
- 99297A2
|
|
700-21810 Motor Mount Bolt Kit replaces MerCruiser part # 10-97934A1
Kit Contains:
| Part # |
MerCruiser # |
Description |
|
Part # |
MerCruiser # |
Description |
| 700-19310 |
10-97934 |
Bolt |
|
700-19320 |
12-35777 |
Washer |
| 700-19330 |
13-33734 |
Lockwasher |
|
700-19340 |
23-99299 |
Spacer |
| 700-19350 |
11-863332 |
Nut |
|
700-30020 |
12-32834 |
Fibre Washer |
|
|
676-18-2140 Additional Details: Interchanges/ReplacesGLMList of Containing Parts | Sierra Item # | OE/Competitor # | Quantity | Description | Image | Comments | | 18-0681 | Chrysler/Force/US Marine
GLM
Mercruiser Stern Drive
Mercury Marine
- 12-32834
- 12-93416
- 12-934161
| 1 | Washer |  | N/A | | 18-3729 | GLM
Mercruiser Stern Drive
Mercury Marine
| 1 | Motor Mount Bolt |  | N/A | | NSS | Mercruiser Stern Drive
| 1 | Washer | No Image | N/A | | NSS | Mercruiser Stern Drive
| 1 | Nut | No Image | N/A | | NSS | Mercruiser Stern Drive
| 1 | Spacer | No Image | N/A | | NSS | Mercruiser Stern Drive
| 1 | Washer | No Image | N/A |
|
|
|
|
|
